Smartsafe Tech X-431 ADAS Mobile Manuel utilisateur

Version: V1.00.000

Revised date: 10-15-2020

SMARTSAFE owns the complete intellectual property rights for the software used by this product. For any

reverse engineering or cracking actions against the software, SMARTSAFE will block the use of this product

and reserve the right to pursue their legal liabilities.

SAFETY PRECAUTION INITIAL USE START CALIBRATION TARGET PATTERN KIT

PRODUCT PROFILE

ADAS Mobile Calibration Tool User Manual

II www.newsmartsafe.com +86 755 84528537

be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic,

mechanical, photocopying, recording or otherwise, without the prior written permission of SMARTSAFE.

Neither SMARTSAFE nor its affiliates shall be liable to the purchaser of this unit or third parties for

damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: Accident, misuse,

or abuse of this unit, or unauthorized modications, repairs, or alterations to this unit, or failure to strictly

comply with SMARTSAFE operating and maintenance instructions. SMARTSAFE shall not be liable for any

damages or problems arising from the use of any options or any consumable products other than those

designated as Original SMARTSAFE Products or SMARTSAFE Approved Products by SMARTSAFE.

All information, specications and illustrations in this manual are based on the latest information available

at the time of printing. SMARTSAFE reserves the right to make changes at any time without prior written or

oral notice.

Trademark Information

SMARTSAFE is a registered trademark of SMARTSAFE TECH CO.,LTD. in China and other countries. All

other SMARTSAFE trademarks, service marks, domain names, logos, and company names referred to in

this manual are either trademarks, registered trademarks, service marks, domain names, logos, company

names of or are otherwise the property of SMARTSAFE or its affiliates. In countries where any of the

SMARTSAFE trademarks, service marks, domain names, logos and company names are not registered,

SMARTSAFE claims other rights associated with unregistered trademarks, service marks, domain

names, logos, and company names. Other products or company names referred to in this manual may be

trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo,

or company name of SMARTSAFE or any third party without permission from the owner of the applicable

trademark, service mark, domain name, logo, or company name. You may contact SMARTSAFE by visiting

the website at www.newsmartsafe.com, or writing to SMARTSAFE TECH CO.,LTD., 3F, Building B, Qiao’an

Technology Industrial Park, Guanlan, Longhua New District, Shenzhen, to request written permission to use

Materials on this manual for purposes or for all other questions relating to this manual.

SAFETY PRECAUTION

INITIAL USE

START CALIBRATION

TARGET PATTERN KIT PRODUCT PROFILE

ADAS Mobile Calibration Tool User Manual

III

www.newsmartsafe.com +86 755 84528537

Safety Precautions

The X-431 ADAS Mobile calibration tool is exclusively intended for use on a vehicle. To avoid personal

injury, property damage, or accidental damage to the product, read all of the information in this section

before using the product:

• To operate the X-431 ADAS Mobile calibration tool properly, user must have knowledge of automotive

technology and is therefore aware of the sources of danger and risks in the repair shop and on vehicles.

• All notes given in the individual sections of the operating instructions apply. In principle it is required to

follow the steps and safety precautions stated below.

• Furthermore, pay attention to all general instructions from labor inspectorates, trade associations and

vehicle manufacturers as well as all laws, legal ordinances and instructions which have to be commonly

obeyed by a repair shop.

The safety messages herein cover situations SMARTSAFE is aware of. SMARTSAFE cannot know,

evaluate or advise you as to all of the possible hazards. You must be certain that any conditions or service

procedure encountered do not jeopardize your personal safety.

WARNING SYMBOLS AND DEFINITIONS

This safety alert symbol is used to alert you to potential injury hazards. Obey all

safety messages that follow this symbol to avoid possible injury.

Indicates an imminently hazardous situation which, if not avoided, could result in

death or serious injury to the operator or to bystanders.

Indicates a potentially hazardous situation which, if not avoided, could result in

death or serious injury to the operator or to bystanders.

Indicates a hazardous situation which, if not avoided, could result in minor or

moderate injury to the operator or to bystanders.

Addresses practices not related to personal injury.

When an engine is operating, keep the service area well-ventilated or attach a building exhaust removal

system to the engine exhaust system. Engines produce various poisonous compounds (hydrocarbon,

carbon monoxide, nitrogen oxides, etc.) that cause slower reaction time and result in death or serious

personal injury.

• Do not use a damaged battery charger.

• The built-in Lithium battery is factory replaceable only. Incorrect replacement or tampering with the

battery pack may cause a explosion.

Read all safety warnings and instructions.

*Note: Failure to follow the warnings and instructions may result in electric shock, re and/or serious injury.

1. Always perform automotive testing in a safe environment.

2. Do not connect or disconnect any test equipment while the ignition is on or the engine is running.

3. DO NOT attempt to operate the tool while driving the vehicle. Have second personal operate the

tool. Any distraction may cause an accident.

4. Before starting the engine, put the gear lever in the Neutral position (for manual transmission) or in the

SAFETY PRECAUTION INITIAL USE START CALIBRATION TARGET PATTERN KIT

PRODUCT PROFILE

ADAS Mobile Calibration Tool User Manual

IV www.newsmartsafe.com +86 755 84528537

Park (for automatic transmission) position to avoid injury.

5. NEVER smoke or allow a spark or flame in vicinity of battery or engine. Do not operate the tool in

explosive atmospheres, such as in the presence of ammable liquids, gases, or heavy dust.

6. Keep a re extinguisher suitable for gasoline/chemical/electrical res nearby.

7. Wear an ANSI-approved eye shield when testing or repairing vehicles.

8. Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.

9. Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark

plugs. These components create hazardous voltage when the engine is running.

10.To avoid damaging the tool or generating false data, please make sure the vehicle battery is fully

charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.

On Using X-431 ADAS Mobile Calibration Tool

In order to avoid incorrect handling and injury to the user or destruction of the X-431 ADAS Mobile

calibration tool arising from this, pay attention to the following:

• Only assemble the X-431 ADAS Mobile calibration tool according to the operating instructions.

• Protect the X-431 ADAS Mobile calibration tool from water and strong impacts.

• Protect the X-431 ADAS Mobile calibration tool from long periods of exposure to solar radiation.

• The light source should ensure that there is no reected spot on the calibration panel.

• In the eld of view of the camera, there should be no direct light source into the camera, otherwise the

camera will reduce the exposure so that the captured calibration pattern becomes darker, adversely

a󰀨ecting the calibration.

• The light source should ensure uniform illumination distribution in the calibration workstation.

• Do a regular check and service for the X-431 ADAS Mobile calibration tool.

On Using Vehicle

When working on the vehicle, please carefully read the following information:

• Make sure the vehicle is parked with all wheels on an even oor surface.

• The park position should also be engaged in automatic vehicles.

• Before calibrating, make sure the vehicle system is working properly and no trouble codes are stored in

ECU memories.

• After a calibration is completely performed, remember to unplug the VCI device from the vehicle’s

diagnostic socket.

On Using Laser Devices

• The laser radiation can cause serious eye injury.

• Do not stare into the laser beam.

• Never look directly into the laser beam because it may cause damage to / destruction of the retina.

• Do not position the laser beam so that it unintentionally blinds you or others.

• Do not operate the laser level near children or let children operate the laser level.

• Do not look into a laser beam using magnifying optical devices such as binoculars or a telescope, as this

will increase the level of eye injury.

• Do not remove or deface warning labels on the laser device.

• Do not disassemble the laser level, laser radiation can cause serious eye injury.

• Do not operate the laser in explosive atmospheres such as ammable liquids, gases or dust. Sparks from

SAFETY PRECAUTION

INITIAL USE

START CALIBRATION

TARGET PATTERN KIT PRODUCT PROFILE

ADAS Mobile Calibration Tool User Manual

www.newsmartsafe.com +86 755 84528537

the tool can cause ignition.

• Do not use solvents to clean the laser unit.

• Do not drop the unit.

• Remove the batteries if the laser / laser range nder will not be in use for a long period.

• Do not allow children to use the laser device as a toy.

• While installing a laser module, please make sure it is rmly and securely attached.

The included goggles are intended to enhance the visibility of the Laser beam. They will not protect your

eyes against laser radiation.

SAFETY PRECAUTION INITIAL USE START CALIBRATION TARGET PATTERN KIT

PRODUCT PROFILE

ADAS Mobile Calibration Tool User Manual

VI www.newsmartsafe.com +86 755 84528537

Table of Contents

1 Product Prole.......................................................................................................................................................................................1

1.1 About ADAS ........................................................................................................................................................................................1

1.2 About X-431 ADAS Mobile............................................................................................................................................................1

1.2.1 Product Introduction.............................................................................................................................................................1

1.2.2 Packing List...............................................................................................................................................................................3

1.3 Components & Controls ............................................................................................................................................................... 9

1.3.1 Calibration frame ................................................................................................................................................................... 9

1.3.2 Five-line laser device (LAM09-01) ............................................................................................................................... 12

1.3.3 Cross laser module (LAM09-02) .................................................................................................................................. 15

1.3.4 Laser reector (LAM09-03)............................................................................................................................................ 15

1.3.5 Auxiliary laser mirror (LAM09-04) .............................................................................................................................. 16

1.3.6 L-shaped positioning bracket (LAM09-05) ............................................................................................................. 16

1.3.7 Plumb line (LAM09-06)..................................................................................................................................................... 16

1.3.8 Target board storage bracket (LAM09-07) ............................................................................................................ 16

1.3.9 Target extension rod for Toyota (LAM09-08)........................................................................................................17

1.3.10 Target extension rod for Honda (LAM09-09).......................................................................................................17

1.3.11 Laser range nder ............................................................................................................................................................. 18

2 Initial Use..............................................................................................................................................................................................20

2.1 Place the calibration frame.......................................................................................................................................................20

2.2 Activate ADAS function ............................................................................................................................................................. 22

2.3 General Calibration Operations for LDW System .........................................................................................................24

2.3.1 Precondition for the Use of the X-431 ADAS Mobile ..........................................................................................24

2.3.1.1 Workstation size .........................................................................................................................................................24

2.3.1.2 Workstation ground ..................................................................................................................................................25

2.3.1.3 Workstation lighting .................................................................................................................................................26

2.3.2 Calibration Operation ........................................................................................................................................................26

2.3.2.1 Determine the center line of the vehicle .........................................................................................................26

2.3.2.2 Determine the placement location of the X-431 ADAS Mobile .............................................................28

2.3.2.3 Place the X-431 ADAS Mobile ...............................................................................................................................29

2.3.2.4 Adjust the X-431 ADAS Mobile in parallel with the vehicle ....................................................................29

2.3.2.5 Select the desired target / pattern board ......................................................................................................30

2.3.2.6 Set the height ..............................................................................................................................................................34

3 Start Calibration ................................................................................................................................................................................ 35

3.1 Calibrating the front camera .................................................................................................................................................... 35

3.1.1 Why to calibrate? ................................................................................................................................................................. 35

3.1.2 Operation Notes .................................................................................................................................................................. 35

SAFETY PRECAUTION

INITIAL USE

START CALIBRATION

TARGET PATTERN KIT PRODUCT PROFILE

ADAS Mobile Calibration Tool User Manual

VII

www.newsmartsafe.com +86 755 84528537

3.1.3 Start calibration.................................................................................................................................................................... 37

3.2 Calibrating the rear camera......................................................................................................................................................46

3.2.1 Why to calibrate?.................................................................................................................................................................46

3.2.2 Operation Notes .................................................................................................................................................................. 47

3.2.3 Start calibration ...................................................................................................................................................................48

4 Target Pattern Kit (Optional) ......................................................................................................................................................54

5 Care & Maintenance......................................................................................................................................................................... 57

6 Warranty............................................................................................................................................................................................... 57

SAFETY PRECAUTION

INITIAL USE

START CALIBRATION

TARGET PATTERN KIT PRODUCT PROFILE

ADAS Mobile Calibration Tool User Manual

www.newsmartsafe.com +86 755 84528537

1 Product Prole

1.1 About ADAS

Advanced Driver Assistance Systems (ADAS) are electronic components in vehicles, which include a

wide range of safety features for vehicles such as autonomous emergency braking (AEB), lane departure

warning (LDW), lane keep assist, blind spot elimination, night vision cameras and adaptive lighting.

Most road accidents occurred due to the human error. Advanced Driver Assist Systems are developed

to automate, adapt and enhance vehicle systems for safety and better driving. The automated system

provided by ADAS to the vehicle is proven to reduce road fatalities, by o󰀨ering technologies that alert the

driver to potential problems or by implementing safeguards and taking over control of the vehicle.

Initially only found on premium segment, the number of modern mid-class and compact vehicles equipped

with Advanced Driver Assist Systems is growing at a rapid rate.

The cameras and sensors used by these systems have to be precisely calibrated and adjusted. Incorrect

calibration resulting from windscreen replacement or wheel alignment can cause the system to deliver

incorrect results or even fail completely, resulting in a serious accident or even a fatality.

1.2 About X-431 ADAS Mobile

1.2.1 Product Introduction

As a exible and portable ADAS calibration tool, the X-431 ADAS Mobile enables you to e󰀨ectively and

accurately calibrate a wide range of camera-based driving assistance systems, e.g. the front camera for the

lane departure warning system. Repair and service shops do not require a fully equipped wheel alignment

station or a leveled workshop ground or platform lift in order to work with X-431 ADAS Mobile calibration

tool.

It features the following key functions and advantages:

• Convenient to carry designed with the foldable base and crossbars, supporting outdoor calibration.

• Five-line & cross laser instrument available for precise centering positioning.

• Simple to fold/unfold and easy to operate.

• Manual rocker for adjusting the height freely.

• Dedicated storage bracket for storing small target boards and big pattern boards.

• Covering a wide range of car makes.

• Excellent user experience for providing vehicle-specific, step-by-step instructions and detailed

illustrations.

To perform the ADAS calibration, the following two components are required:

• X-431 ADAS Mobile Calibration Tool – It is designed to calibrate the position of the vehicle sensor and

target. It mainly consists of calibration frame (with cross member), five-line laser device, cross laser

module, laser reflector, auxiliary mirror, L-shaped positioning bracket, leader hammer and calibration

panel (available in packages or individual) etc.

SAFETY PRECAUTION INITIAL USE START CALIBRATION TARGET PATTERN KIT

PRODUCT PROFILE

ADAS Mobile Calibration Tool User Manual

2www.newsmartsafe.com +86 755 84528537

• Diagnostic Tool (sold separately) – The calibration tool can be exclusively operated in conjunction with a

Launch’s diagnostic tool. Diagnostic tools from other manufacturers will not be supported.

Currently, the following diagnostic tools made by LAUNCH can work together with the calibration tool (More

new products featuring this module will come soon in the future without prior notice):

• X-431 PRO3 / X-431 PRO Series

• X-431 PAD Series

SAFETY PRECAUTION

INITIAL USE

START CALIBRATION

TARGET PATTERN KIT PRODUCT PROFILE

ADAS Mobile Calibration Tool User Manual

www.newsmartsafe.com +86 755 84528537

1.2.2 Packing List

Please check the packing list upon receiving your tool so that complaints can be issued immediately

regarding potential damage or missing parts. For different destinations, the accessories may vary. For

details, please consult from the local dealers or check the included packing list.

While unloading, please note: The heavy tool may drop down and cause injuries, remember to always unload

the tool with the aid of a second person or use suitable aid as necessary.

Items Picture Quantity

Calibration frame 1

Five-line laser device

(LAM09-01) 1

Cross laser module

(LAM09-02) 1

Laser reector

(LAM09-03) 1

Auxiliary mirror

(LAM09-04) 1

L-shaped positioning bracket

(LAM09-05) 1

Table des matières

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur