SmartRG WR100 Manuel utilisateur
WR100
300Mbps Wireless-N Repeater
User Manual
Release 1.0
November 29, 2012
SmartRG WR100 – User Manual
Page 2 of 25
Table of Contents
About the Device .............................................................................................................. 3
Minimum System Requirements ................................................................................................ 3
Package Contents .................................................................................................................... 3
Device Overview ..................................................................................................................... 4
Front Panel .................................................................................................................................... 4
Top Panel ....................................................................................................................................... 5
Bottom Panel ................................................................................................................................. 5
Accessing the User Interface .............................................................................................. 6
Quick Connect ......................................................................................................................... 7
Setup ..................................................................................................................................... 8
Wireless ................................................................................................................................ 10
Wireless Basic Settings ................................................................................................................. 10
Wireless Security Settings ............................................................................................................ 11
MAC Filter Settings ...................................................................................................................... 12
System .................................................................................................................................. 14
Device Information ...................................................................................................................... 14
LAN Configuration ........................................................................................................................ 15
Configuration Settings .................................................................................................................. 16
Firmware Upgrade ....................................................................................................................... 17
System Password ......................................................................................................................... 18
Installing the Device ....................................................................................................... 19
Wireless Repeater .................................................................................................................. 20
Wireless Access Point ............................................................................................................. 22
Wireless Bridge ...................................................................................................................... 24
WPS ...................................................................................................................................... 25
Configure WR100 to Wireless Router via WPS ............................................................................... 25
Configure WR100 to Wireless client via WPS................................................................................. 25
Safety Precautions .......................................................................................................... 25
SmartRG WR100 – User Manual
Page 3 of 25
About the Device
The SmartRG WR100 is a Wall-plugged 300Mbps Wireless-N Repeater, which supports wireless
802.11b/g/n, and one 10/100 Base-T Ethernet port.
Repeat and Extend the WiFi Network
The WR100 supports robust 802.11n technology with up to 300Mbps data transfer rate. The
extender can take an existing 802.11n wireless signal, repeat and extend it to a longer range
where it is too far away for the router or access point to reach. It eliminates the cable wires
while providing the same reliable network connection. It can repeat and extend the wireless signal
from virtually any 802.11n wireless router or access point available on the market. It is
backwards compatible with 802.11b/g routers and access points.
Make an existing Wired Network WiFi Ready
The extender is equipped with 1 x 10/100M Auto MDI/MDIX LAN port that can be used to connect to
an existing wired network to serve as a WiFi Access Point. The Ethernet port can also be used to
configure the WR100 via its web-based GUI, or upgrade the firmware.
MIMO Technology
The device is designed with MIMO technology, which successfully reduces
“
dead spots
”
, and extends
network coverage within a home or in the building.
Advanced Security
WR100 features WiFi Protected Access (WPA and WPA2) as well as 64/128-bit WEP encryption,
ensuring network security and preventing unauthorized access to you network.
Portable without the Need of External Power Supply
The device is easy to setup. It is portable with no need of any external power adaptor. It comes with
an embedded power supply and power plug, so that users can just plug the device into a power
socket.
Minimum System Requirements
Your computer must meet the following minimum requirements.
Any operating system can be used
Web Browser
233MHz processor
Ethernet network adapter
Or Wireless network adapter
Package Contents
Package contents are listed below. For any missing items, please contact your dealer immediately.
Product contents may vary for different models.
WR100
Ethernet cable
Easy Start Guide
Resource CD
SmartRG WR100 – User Manual
Page 4 of 25
Device Overview
Front Panel
LABEL
STATE
DESCRIPTION
3 BARS
Connected
95% and above RSSI (Excellent)
2 BARS
Connected
55-94% RSSI (Recommended)
1 BAR
Connected
10-54% RSSI (Weak)
SmartRG WR100 – User Manual
Page 5 of 25
Top Panel
Bottom Panel
LABEL
DESCRIPTION
WPS BUTTON
Press to connect WR100 to any WPS capable devices
LABEL
DESCRIPTION
RESET
Press the Reset button for 5 seconds to restore the device to default factory settings
ETHERNET
PORT
Connect to computers/Ethernet devices
WPS
RESET
10/100 Base-T Ethernet
Port
SmartRG WR100 – User Manual
Page 6 of 25
Accessing the User Interface
To access the User Interface open a Web browser (Ex: Internet Explorer, Firefox or Chrome), type
http://10.0.10.254 in the address bar and press enter.
SmartRG WR100 – User Manual
Page 7 of 25
Quick Connect
Press Quick Connect icon to scan for available wireless within the area.
SmartRG WR100 – User Manual
Page 8 of 25
Setup
Mode of Operation
Repeater
The WR100 can act as a wireless repeater to extend the wireless coverage of your wireless router.
Access Point
The WR100 can act as an Access Point to provide wireless network
Bridge
The WR100 can act as a Bridge to act as wireless client to your network device
SSID
Here you can set the name of your wireless network. Select the option Disable on Broadcast SSID
allow you to hide the wireless network name.
Security Mode
SmartRG WR100 – User Manual
Page 9 of 25
Select from the different encryption types list in order to provide security to your wireless
network from unauthorized users. Select from the following:
WEP
Hexadecimal:
64bit – uses 10 characters length of password from A-F and numbers from 0-9
128bit- uses 26 characters length of password from A-F and numbers from 0-9
ASCII:
64bit – uses 5 characters alpha numeric password (A-Z and 0-9)
128bit – uses 13 characters length of password from (A-Z and 0-9)
WPA
Uses strong encryption, some legacy devices may not be able to associate with this type of
encryption
WPA2
Use this encryption for best security, some legacy devices may not associate with this type of
encryption
WPA/WPA2 PSK
Use a balance of strong security and best compatibility for new and legacy devices.
SmartRG WR100 – User Manual
Page 10 of 25
Wireless
Wireless Basic Settings
Enable Wireless
Enable or Disable wireless capability
Broadcast SSID
Set option to disable to hide your wireless network (Enable by default)
SSID
Here you can enter the name of your wifi network
Table des matières
