■ Reset button : restore functions to default settings
1) Press RESET button once each time you turn on unit.
2) Please press this button in case of system malfunction.
■ Off/Rec • Please press OFF/REC button to remove SD card
(part no.(2)). Please remove card within 0 seconds o f pressing
the OFF/REC button to avoid loss of data.
Step 5. Recording Audio Messages (see fig. 13
1. Press the Set/Rec button for seconds, and you will hear a single
beep. After the beep, start recording your message by talking
intothe microphone (see fig. 1 ) Push the button again to stop
recording, and you will hear a series o f 2 beeps, meaning the
recording is finished. If you do not push the button again after
you have recorded the message, the recording will stop
automatically after 10 seconds.
2. SmartGuard can hold 2 self-recorded messages. If you have
recorded one message, repeat above step for message 2.
■ Play/Erase : allows you to listen to and erase messages
(see fig. 1 )
1) If you have only recorded 1 message, push the button one
time to listen to recorded Message 1. If you wish to erase it,
press the Play/Erase button and hold it for seconds. You
will hear a series o f 2 beeps, indicating the message has
been erased.
2) If you have recorded 2 messages, push the button one time
to listen to the first message, and push it again to listen to
the second message. If you want to erase a message, select
that message, and after listening to it, push the Play/Erase
button and hold it for seconds to erase it.
) If message 1 is erased, message 2 will automatically becomc
message 1. The next message you record will then become
the new message 2.
