Instructions
07
Storage
•Unplug the power cord from the main power supply.
•Allow the unit to cool thoroughly (at least cool-to-touch).
•Remove all attachments from the unit.
•Drain the remaining water from the water tank to minimize
potential mineral build-up. Loosely replace the water tank cap
but do not tighten as it may be dicult to unscrew for future use.
•Store all accessories with the unit in a dry, cool location.
Removing Mineral Build-up
•Dierent water sources contain minerals and the sediment may cause
mineral build-up in the steamer and aect the free ow of steam.
NOTE: The best way to avoid mineral build-up is to use distilled or
de-mineralized water. If you are unable to do this, it is recommended
to use the mineral build-up removal procedure.
•Unplug the unit and allow it to cool completely (at least cool-to-touch)
•Remove all accessories from the unit.
•Remove the water tank cap and drain any remaining water.
•Using a measuring cup, prepare a mixture of 0.125l. vinegar and
0.125l.water.
•Slowly pour the mixture into the water tank.
•Allow the unit to stand for 1-2 hours; drain solution when done.
•If the mineral build-up still remains in the unit, repeat the above
steps until all build-up is removed.
•Rinse the water tank with fresh water, drain and repeat until the
vinegar odour is eradicated.
•Replace the water tank cap.
