SPB Series
DIN rail mounting switching mode power supply
● DIN rail type and fixing screw type mountings
● Built-in overcurrent protection, output short circuit
protection, overheat and over voltage limit protection
circuit (S B-120)
● Built-in power factor correction circuit(S B-120/240)
● Low-voltage LED indicator
● Slim-type size (S B-060: W36×H100×L110mm)
● Minimizes noise and ripple
● Improves user safety with terminal cover
● Designed to minimize heat
● Output power : 60W, 120W, 240W
● Output voltage: 12VDC, 24VDC, 48VDC
Ordering information
Specifications
Features
Item
Output power
Output voltage
SPB 060 2
12 12VDC
24 24VDC
48 48VDC
060 60W
120 120W
240 240W
S B Switching Mode ower Supply
SPB-060
Series
SPB-120
Series
SPB-2 0
Series
Please read “Caution for your safety” in operation
manual before using.
Over-heating protection
If the inner temperature of the switching element is around 140℃ by overheat, it stops switching operation and becomes
open state. Output voltage is not output.
Model SPB-060-12 SPB-060-2 SPB-120-2 SPB-2 0-12 SPB-2 0-2 SPB-2 0- 8
Output power 60W 120W 240W
Input
Voltage 100-240VAC(85-264VAC)
Frequency 50/60Hz
Efficiency※1 Min. 75% Min. 80% Min. 86% Min. 88%
ower factor※1
-
Min. 0.9
Current consumption
※1Max. 1.6A Max. 1.9A Max. 3.8A
ower factor correction circuit
-
Built-in
Output
Voltage 12VDC 24VDC 12VDC 24VDC 48VDC
Current 5A 2.5A 5A 20A 10A 5A
Voltage adjustment range
※2Max. ±5%
Input variation※3Max. ±0.5%
Load variation※1Max. ±1% Max. ±1.5%
Ripple※1Max. ±1% Max. ±3% Max. 1.5% Max. ±1%
Start-up time※1Max. 600ms Max. 1000ms
Hold time※1 Min. 10ms Min. 20ms
rotection
Inrush current protection Max. 25A (100VAC), Max. 40A(240VAC) Max. 50A(100VAC), Max. 50A(240VAC)
Output over current protection
※
Min. 105%
Output over voltage protection
-
30.0V ±10% 16.0V ±10% 30.0V ±10% 58.0V ±10%
Output short-circuit protection
Max. 10ms
Output low-voltage indicate
9.6V±10% 20.0V±10% 10.0V±10% 20.0V±10% 43.0V±10%
Output indicator Green LED
※1: It is for the rated input voltage 100-240VAC, and 100% load.
※2: Adjusting voltage by the output adjuster (V.ADJ), it is changed the below voltage adjustment range(±5%).
※3: It is for the rated input voltage 100-240VAC(85-264VAC), and 100% load.
※4: It is for the rated input voltage 100-240VAC.
Tel:
11 4425-5103 Tel: 11 2759-8613 Internet: www.smartec-automacao.com.br E-mail:
smartec@smartec-automacao.com.br
Tel:
11 4425-5103 Tel: 11 2759-8613 Internet: www.smartec-automacao.com.br E-mail:
smartec@smartec-automacao.com.br
