Smartec PIN Genie Smart Lock PGD728 Manuel utilisateur
Thank you for choosing our PIN Genie product.
Please read this manual carefully to ensure the Smart Lock is used safely and reliably.
You should keep it for future reference and maintenance.
U.S. Patent No. 9,665,706
V.092017
PIN Genie Smart Lock
User Manual
Model No. PGD718 / PGD728
REV：0.3
Date:2017-09-22
Designer：
Y186c
PL3502Q-US-SMT00010A-V1 ERP P/N:
PL3502Q/PGD728，SMT000,REV.B，145x210mm，80g
“Model No. PGD718/PGD728”，RoHS2.0，REACH，Prop65，POPs，PAHs
Patented Anti-Peep PIN Pad
Random digits shown on the Pin Genie display keypad ensure passcodes
won't be detectable to intruders after repeated use.
Intruder prevention
PGD718 / PGD728 smart lock has a built-in audible alarm mode that alerts
you for any intrusion into your house. With the alarm mode on, our lock
reacts against any external physical shock and vibration. The owner can
immediately be notified with the intrusion.
Do not Disturb
The exterior display keypad can be locked and turned off using the
tailor-made design ON/OFF toggle button from inside. The owner can pre-
vent others trying to input the passcode from outside and go into the house.
Automatic lock
No longer have to worry about forgetting to lock the door. With Auto Lock
enabled, PGD718 /PGD728 can automatically relock the door 30 seconds
after unlocking.
With mechanical key and 9V battery socket as backup
The door can be opened via the mechanical keys. There is also 9V battery
connection socket for the users to use the 9V battery for power supply if the
lock battery is running out.
PGD 718 / PGD728 Smart Lock is keyless and equipped with the patented innovative
PIN Genie Pad, which is peep proof and hidden camera proof. It is with a high security
level that even when people watch you entering your PIN, they will not be able to know
it. PIN Genie Smart Lock makes your life safer and better.
About PIN Genie Smart Lock
PGD718 Essential / PGD728 PRO ( Bluetooth Version)
Contents
Section 1 Installation Instruction
1.1 Installation overview
1.2 Assembly parts
1.3 Prepare door and check dimensions
1.4 Adjust the backset of latch
1.5 Extend the bolt
1.6 Install latch
1.7 Prepare exterior assembly
1.8 Install exterior assembly
1.9 Install interior assembly
1.10 Install batteries
1.11 Install strike
1.12 Install battery cover
1
1
2
2
3
3
3
4
5
6
6
6
11
12
12
13
14
15
17
17
19
19
7
8
9
9
10
10
10
2.1 Components
2.2 Setting switch
2.3 Reset
2.4 Display keypad switch
2.5 Restart
2.6 PIN GENIE button
2.7 Changing the battery
3.1 Passcode information
3.2 How to enter settings
3.3 Add Passcode
3.4 Delete Passcode
3.5 Check Passcode ( On Model PGD718) / Bluetooth Switch ( On Model PGD728)
3.6 Alarm Sensitivity
4.1 Unlock from outdoor
4.1.1 Safe mode
4.2 Unlock & Lock from indoor
4.3 Lock from outdoor
０１
０７
１１
１７
１９
Section 2 Introduction of the smart lock
Section 4 Locking and unlocking the door
Section 3 Programming Passcode
Section 5 Safety Precautions
R
Section 1 Installation Instruction
A
O
D F G J K
H1
H2
I
M
N
P
Q R A
B
C
B
C
D
F
I
N
PQP
O
J
M
１．１ Installation overview
１．２ Assembly parts
H
H1
H2
1
1"
25mm
1/2"
12mm
* Drill hole
* Drill hole
2-1/8"
54mm
3-109/127"(98mm)
2-3/8"(60mm) 2-3/4"(70mm)
Or
1-3/8"—2" (35mm—50mm)
Push toggle button “a”
downwards and pull part “b”
outwards.
Initial position of c: 2-3/8"
Pull “c” to 2-3/4"and release
button “a” . Now the backset
has been adjusted to 2-3/4".
Adjust as shown below (only if needed)
Hold the latch in front of the drilled hole as shown below.
３１ ２
2-3/8"
ba
c
2-3/4"2-3/4"
１．３ Prepare door and check dimensions
１．４ Adjust the backset of latch
If drilling a new door, please use
the template supplied.
If the latch holes are centered in the drilled
hole, no adjustment is needed.
If NOT, adjust the latch.
2
１
２
O
B
C
D
１．５ Extend the bolt
１．７ Prepare exterior assembly
１．６ Install latch
OP(2X)
Vertical
Pay attention to the direction of the latch.
Extend the latch bolt as shown.
When the bolt is extended, the
torque blade should be kept in
a vertical position.
Take out the screw which
is being used for fixing
the cylinder during transit
and discard it.
Install “D” & “C” on “B”
in order as shown.
You can attach this fixed column (optional)
to the lock body. It is recommended to
have it for the lock's fixity.
3
１２
３
B
１．８ Install exterior assembly
G
F
Cable goes underneath the latch
Side hole
Center hole
Route cable through center hole, then push it into side hole.
I(2X)
H
I(2X)
H
Keep parallel
Before screwing, check the vertical align-
ment for the mounting plate and exterior
assembly.
After installation, use back-up key to test
the latch. If the latch does not retract or
extend smoothly, adjust screws.
５４
When the bolt is extended, the torque blade
should be kept in a vertical position.
A
H1
H2
Please use the “H1 screw” for
the door thickness 35-43mm.
Or use the “H2 screw” for the
door thickness 43-50mm.
4
Note: Please use the physical
key to rotate the torque blade
in vertical position and then
pull out the key.
J
N
Pay attention to the direction and
ensure tight cable connection.
１ ２
３
４
１．９ Install interior assembly
Open the battery compartment by
unscrewing the screw and remove
the cover.
Note: Do not install
batteries yet!
Fix the interior assembly with
screws provided.
Push the thumbturn shaft onto the torque
blade.
M
Connect the cable.
torque blade thumbturn shaft
Make sure thumbturn is in the
vertical position.
5
K
１．１０ Install batteries
１．１２ Install battery cover
１．１１ Install strike
Install 4 new AA batteries. Make sure
batteries are correctly oriented.
Before installing the last battery, press and
hold “Program” button until you finish,
then you will hear a long beep. Once you
release the button, the latch will automati-
cally do a self-check and the display keypad
will play boot animation.
+
+
-
+
-
-
+
-
Q
P(2X) R
Note: Program passcode before installing
battery cover. See Section 3.
Tighten the screw.
6
Section 2 Introduction of the smart lock
２．１ Components
Note: When Model728 APP is enabled, the RESET, PROG will be disabled
and controlled by APP.
Battery compartment
Restart Button
Lock Status icon
Bluetooth light-PGD728
Power Status
Bluetooth icon-PGD728
OK Button
Key Hole Cover
Back-up Battery
Socket
Front (Front Body）Back (Main Body）
Battery Compartment Cover
Key Hole
Display Keypad Switch
Thumbturn
PIN GENIE Button
Siren
Reset Button
Setting Switch
Program Button
7
Ce manuel convient aux modèles suivants
1
Table des matières
