Smartbox Touch Pad Manuel utilisateur
Created by
Manual
Document: Touch Pad - Manual - UK - K
Language: English
Date of issue: Decmeber 2023
Copyright © 2023 Smartbox Assistive Technology
This guide provides the basics for getting
started with your Touch Pad.
hub.thinksmartbox.com/TouchPad
1. Starting Grid 3 4
2. Power 6
3. Device guide 8
4. Charging 10
5. Mounting 12
6. Shoulder strap 14
Manual
1Starting Grid 3
Grid 3 will automatically start when the device is
switched on by default. However, you can start Grid 3
from icon on the desktop.
Grid 3
For more resources and guides on how to get started
with Grid visit the Smartbox Hub.
• Get started with Grid
• Access methods and setup
• Troubleshooting guides
• Videos and webinars
• Resources for grid sets
• ...and much more.
hub.thinksmartbox.com/grid3
6
Before switching on your Touch Pad for the first time, it
is best to plug in the power lead and charge the battery
fully. Press the power button to turn the device on.
The device will boot into Windows, and Grid 3 will
automatically start.
While the device boots, also press the Speaker power
button to turn on the bluetooth speaker.
Power
Power
2
Speaker
power
button
7
When not in use, it is good practice to shut down your
Touch Pad completely. This will give any automatic
updates a chance to be applied. We also recommend
that your device is shut down before it is stored for
transit.
Open the Start menu and tap the power icon. From here
you can select Sleep, Shut down and Restart. Selecting
Shut down will power the device down completely.
You can also turn off your device from within Grid 3, by
using the Turn off computer command. This command
can be added to any grid set.
Force shut down
If you press and hold the power button for ten seconds,
your Touch Pad will shut down. Please note that this
is only recommended when the Touch Pad is non-
responsive. Any unsaved work will be lost.
8
Device guide
Touch screen
Front camera
Handle
Volume up
and down
Power
3
9
Rear camera
Charging port
Headphone port
USB C
Strap rings
Speaker
Speaker
charging
port
Speaker
power
button
Stand
10
To charge your Touch Pad, plug the power lead into the
charging port on the left side of the device.
To charge both the Touch Pad and the speaker at the
same time use the provided charging lead with USB C.
A full charge will take up to 3 hours.
Charging4
Charging port
Autres manuels pour Touch Pad
1
Table des matières
Autres manuels Smartbox Écran tactile
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
