SMART SWC-120UHD Manuel utilisateur
smarttech.com/kb/171866 2
Learn more
This guide and other resources for SMARTUltra HD Camera are available in the
Support section of the SMARTwebsite (smarttech.com/support). Scan this
QRcode to view these resources on your mobile device.
Trademark notice
SMARTBoard, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMARTTechnologiesULC in the U.S. and/or other countries. All
third-party product and company names may be trademarks of their respective owners.
Copyright notice
© 2023SMARTTechnologiesULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into
any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change without notice and does
not represent a commitment on the part of SMART.
This product and/or use thereof is covered by one or more of the following U.S. patents:
www.smarttech.com/patents
March 9, 2023
smarttech.com/kb/171866 3
Important information
Warning
For indoor use only
Important
This product may contain substances that are candidate SVHCs under the EU REACH Regulation (EC) 1907/2006. Check
https://echa.europa.eu/scip-database for the latest information.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their
expense.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance of 20cm between the radiator & your body.
FCC
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: C120-1
Responsible Party – U.S. Contact Information
SMART Technologies Inc.
2401 4th Ave, 3rd Floor
Seattle, WA 98121
Innovation, Science, and Economic Development Canada Statement
This device complies with CAN ICES-003(A) / NMB-003(A) of the Innovation, Science and Economic Development Canada Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Important information
smarttech.com/kb/171866 4
Ce dispositif est conforme à la norme CAN ICES-003(A) / NMB-003(A) d’Industrie Canada applicable aux appareils radio exempts
de licence. Son fonctionnement est sujet aux deux conditions suivantes:
1. le dispositif ne doit pas produire de brouillage préjudiciable, et
2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
EU Declaration of Conformity
Hereby, SMART Technologies ULC declares that the C120-1 complies with Directive 2014/30/EU. The full text of the EU and UK
declaration of conformity is available at the following Internet address: smarttech.com/compliance
Hardware environmental compliance
SMARTTechnologies supports global efforts to ensure that electronic equipment is manufactured, sold, and disposed of in a safe
and environmentally friendly manner.
Waste Electrical and Electronic Equipment regulations (WEEE and Battery Directive)
Electrical and electronic equipment and batteries contain substances that can be harmful to the environment and to
human health. The crossed-out wheeled bin symbol indicates that products should be disposed of in the appropriate
recycling stream and not as regular waste.
Batteries
The SMART Ultra HD Camera remote contains two AAA batteries. Recycle or dispose of batteries properly.
See smarttech.com/compliance for more information.
smarttech.com/kb/171866 5
Contents
Important information 3
Chapter 1 Welcome 6
About this guide 6
Features 6
Components 7
Chapter 2 Installing and connecting your camera 8
Chapter 3 Enable your camera 9
Chapter 4 Using the remote control 10
Using the preset buttons 11
Chapter 5 Adjusting on-screen display menu settings 12
Changing settings in the on-screen display menu 12
Setup 12
Exposure 13
Color 14
Image 14
Noise reduction 15
Version 15
Restore Default 15
Chapter 6 Using your camera with SMARTBoard interactive displays and iQ 16
Chapter 7 Maintaining your camera 17
smarttech.com/kb/171866 6
Chapter 1 Welcome
About this guide 6
Features 6
Components 7
About this guide
This guide is for users who set up and use the SMART Ultra HD Camera in their organizations.
It includes information about setting up the camera and using the camera’s on-screen display menu
and software.
For more information, such as videos, training, and how-to topics, visit
support.smarttech.com/docs/redirect/?product=smartultrahdcamera.
Features
The SMART Ultra HD Camera 120 is a 4K Ultra-HD camera with ePTZ. Easily install the camera on a
SMARTBoard® interactive display. The camera can automatically frame people meeting in a
boardroom.
Feature Details
Image l1/2.8" 4K CMOS
8.28 megapixels
l10x digital zoom
138°( D) /120°(H)/68°(V)
Function lAutomatic framing
lUVCUSB communication protocol
lSupports ePTZ for Windows and Mac computers
Physical construction lSliding cover for the camera
Chapter 1 Welcome
smarttech.com/kb/171866 7
Feature Details
Supported operating systems llWindows® 10 or later
lmacOS 10.10 or later
lAndroid™ 11
lLinux® 4.9.84
Supported SMART hardware llSMARTBoard QX Pro series
lSMART Board® 6000S and 6000S Pro series
lSMARTBoard MX (V4) and MX (V4) Pro series
Components
No. Component Notes
1 Indicator light Indicates when the camera is on.
2 Camera cover slider Can cover the camera lens. Slide left to cover
lens when not in use.
3 Camera lens Keep clean to ensure best picture quality.
4 USB 3.0 Type-B Use cables provided with the camera.
smarttech.com/kb/171866 8
Chapter 2 Installing and connecting
your camera
You or your organization’s installers can install the camera on a supported SMART Board interactive
display’s following the camera’s installation instructions: SMARTUltra HDCamera illustrated installation
instructions.
Caution
Do not install or remove the camera while the display is turned on. Ensure the power switch on the
back of the display is in the OFF (O) position. The switch is located beside the AC power inlet.
For a list of SMART Board interactive displays in which you can install the camera, see
Supported SMART
hardware
on page7.
Chapter 3 Enable your camera
smarttech.com/kb/171866 9
Chapter 3 Enable your camera
Once the camera is installed, enable camera mode to use it on your display.
1. Ensure your display is turned on.
2. On the main screen of your display, select Apps.
3. Select Camera from the available apps.
Tip: For the best picture, and effective remote control operation, ensure that the camera cover slider is
slid all the way to the right.
Chapter 4 Using the remote control
smarttech.com/kb/171866 10
Chapter 4 Using the remote control
Use the infrared remote control to turn the web camera on or off, to open the on-screen menu, and
reposition the camera.
No. Name Procedure
1 Pause Enable or disable the camera. The camera goes into standby mode
when it’s paused - it does not turn off.
2 OK Press OK to reset the camera position.
3 Left and right
buttons
Press Left to pan the camera left.
Press Right pan the camera right.
Tip
You cannot pan when the camera is fully zoomed out.
4 Preset Save up to three camera positions.
See
Using the preset buttons
on the next page.
5 Zoom out Press to decrease the camera’s zoom.
6 Auto framing Turn on or off automatic framing. Automatic framing centers the
camera on meeting participants.
7 Menu lPress to open the on-screen menu.
lIf in the top level of the on-screen menu, press Menu to exit.
lIf in the on-screen menu, press Menu to return to the previous
menu.
8 Up and down
buttons
Press Up to tilt the camera up.
Press Down to tilt the camera down.
Tip
You cannot tilt when the camera is fully zoomed out.
9 Zoom in Press to increase the camera’s zoom.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels SMART caméscope
Manuels caméscope populaires d'autres marques
Panasonic
Panasonic AG-HMC152EN Manuel utilisateur
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur
MYDLINK
MYDLINK DCS-6100LH Manuel utilisateur
Sony
Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur
SECURECOM
SECURECOM V-5014B Manuel utilisateur
Panasonic
Panasonic HDC-SD100 Manuel utilisateur
