SMART Embedded Computing MVME2502 Guide de démarrage rapide

MVME2502

Installation and Use

P/N: 6806800R96G

September 2019

Trademarks

The stylized "S" and "SMART" is a registered trademark of SMART Modular Technologies, Inc. and “SMART Embedded

Computing” and the SMART Embedded Computing logo are trademarks of SMART Modular Technologies, Inc. All other names

and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. These materials are

provided by SMART Embedded Computing as a service to its customers and may be used for informational purposes only.

Disclaimer*

SMART Embedded Computing (SMART EC) assumes no responsibility for errors or omissions in these materials. These

materials are provided "AS IS" without warranty of any kind, either expressed or implied, including but not limited to,

the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. SMART EC further does

not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these

materials. SMART EC shall not be liable for any special, indirect, incidental, or consequential damages, including without

limitation, lost revenues or lost profits, which may result from the use of these materials. SMART EC may make changes to

these materials, or to the products described therein, at any time without notice. SMART EC makes no commitment to update

the information contained within these materials.

Electronic versions of this material may be read online, downloaded for personal use, or referenced in another document as a

URL to a SMART EC website. The text itself may not be published commercially in print or electronic form, edited, translated,

or otherwise altered without the permission of SMART EC.

It is possible that this publication may contain reference to or information about SMART EC products, programming, or services

that are not available in your country. Such references or information must not be construed to mean that SMART EC intends

to announce such SMART EC products, programming, or services in your country.

Limited and Restricted Rights Legend

If the documentation contained herein is supplied, directly or indirectly, to the U.S. Government, the following notice shall apply

unless otherwise agreed to in writing by SMART Embedded Computing.

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (b)(3) of the Rights in

Technical Data clause at DFARS 252.227-7013 (Nov. 1995) and of the Rights in Noncommercial Computer Software and

Documentation clause at DFARS 252.227-7014 (Jun. 1995).

SMART Embedded Computing, Inc.

2900 S. Diablo Way, Suite 190

Tempe, Arizona 85282

USA

*For full legal terms and conditions, visit www.smartembedded.com/ec/legal

Table of Contents

MVME2502 Installation and Use (6806800R96G) 3

About this Manual ...............................................................13

Safety Notes....................................................................19

Sicherheitshinweise .............................................................23

1 Introduction.................................................................27

1.1 Overview ...............................................................27

1.2 Standard Compliances ....................................................29

1.3 Mechanical Data .........................................................29

1.4 Ordering Information ......................................................30

1.5 Product Identification .....................................................30

2 Hardware Preparation and Installation ...........................................33

2.1 Overview ...............................................................33

2.2 Unpacking and Inspecting the Board .........................................34

2.3 Requirements ...........................................................34

2.3.1 Environmental Requirements ........................................35

2.3.2 Power Requirements ................................................36

2.3.3 Equipment Requirements.............................................37

2.4 Configuring the Board .....................................................37

2.5 Installing Accessories .....................................................38

2.5.1 Rear Transition Module ..............................................38

2.5.2 PMC/XMC Support..................................................39

2.5.3 Installation of MVME2502-HDMNTKIT1/MVME2502-HDMNTKIT2.............40

2.6 Installing and Removing the Board ...........................................43

2.7 Completing the Installation .................................................44

3 Controls, LEDs, and Connectors ...............................................45

3.1 Board Layout ...........................................................45

3.2 Front Panel .............................................................47

3.2.1 Reset Switch ......................................................48

3.3 LEDs ..................................................................48

3.3.1 Front Panel LEDs...................................................48

4 MVME2502 Installation and Use (6806800R96G)

Table of Contents

3.3.2 On-board LEDs ....................................................50

3.4 Connectors .............................................................51

3.4.1 Front Panel Connectors ..............................................51

3.4.1.1 RJ-45 with Integrated Magnetics (J1) ...........................51

3.4.1.2 Front Panel Serial Port (J4) ...................................52

3.4.1.3 USB Connector (J5) .........................................53

3.4.1.4 VMEBus P1 Connector ......................................53

3.4.1.5 VMEBus P2 Connector ......................................55

3.4.2 On-board Connectors................................................56

3.4.2.1 SATA Connector (J3) ........................................56

3.4.2.2 PMC Connectors ...........................................57

3.4.2.3 JTAG Connector (P6) ........................................63

3.4.2.4 COP Connector P50(15) .....................................64

3.4.2.5 XMC Connector (XJ1) .......................................65

3.4.2.6 XMC Connector (XJ2) .......................................66

3.4.2.7 Miscellaneous P2020 Debug Connectors(P4) .....................66

3.5 Switches ...............................................................67

3.5.1 Geographical Address Switch (S1) .....................................67

3.5.2 SMT Configuration Switch (S2) ........................................69

4 Functional Description........................................................71

4.1 Block Diagram ..........................................................71

4.2 Chipset ................................................................72

4.2.1 e500 Processor Core ................................................72

4.2.2 Integrated Memory Controller .........................................72

4.2.3 PCI Express Interface ...............................................73

4.2.4 Local Bus Controller (LBC) ...........................................73

4.2.5 Secure Digital Host Controller (SDHC) ..................................73

4.2.6 I2C Interface.......................................................73

4.2.7 USB Interface......................................................74

4.2.8 DUART...........................................................74

4.2.9 DMA Controller.....................................................74

4.2.10 Enhanced Three-Speed Ethernet Controller (eTSEC).......................74

4.2.11 General Purpose I/O (GPIO) ..........................................74

4.2.12 Security Engine (SEC) 3.1 ............................................75

4.2.13 Common On-Chip Processor (COP) ....................................76

4.2.14 P2020 Strapping Pins ...............................................76

4.3 System Memory .........................................................79

Table of Contents

MVME2502 Installation and Use (6806800R96G) 5

4.4 Timers.................................................................79

4.4.1 Real Time Clock....................................................79

4.4.2 P2020 Internal Timer ................................................79

4.4.3 Watchdog Timer....................................................79

4.4.4 CPLD Tick Timer ...................................................79

4.5 Ethernet Interfaces .......................................................80

4.6 SPI Bus Interface ........................................................80

4.6.1 SPI Flash Memory ..................................................80

4.6.2 SPI Flash Programming..............................................81

4.6.3 Firmware Redundancy...............................................81

4.6.4 Crisis Recovery ....................................................82

4.7 Front UART Control ......................................................83

4.8 Rear UART Control .......................................................83

4.9 PMC/XMC Sites .........................................................84

4.9.1 PMC Add-on Card ..................................................85

4.9.2 XMC Add-on Card ..................................................85

4.10 SATA Interface ..........................................................85

4.11 VME Support ...........................................................85

4.11.1 Tsi148 VME Controller...............................................86

4.12 USB ..................................................................86

4.13 I2C Devices ............................................................86

4.14 Reset/Control CPLD ......................................................87

4.15 Power Management ......................................................88

4.15.1 On-board Voltage Supply Requirement ..................................88

4.15.2 Power Up Sequencing Requirements ...................................88

4.16 Clock Structure ..........................................................89

4.17 Reset Structure ..........................................................90

4.17.1 Reset Sequence....................................................90

4.18 Thermal Management .....................................................90

4.19 Real-Time Clock Battery ...................................................90

4.20 Debugging Support .......................................................91

4.20.1 POST Code Indicator................................................91

4.20.2 JTAG Chain and Board ..............................................91

4.20.3 Custom Debugging .................................................92

4.21 Rear Transition Module (RTM) ..............................................93

5 Memory Maps and Registers ...................................................95

5.1 Overview ...............................................................95

6 MVME2502 Installation and Use (6806800R96G)

Table of Contents

5.2 MemoryMap............................................................95

5.3 Flash Memory Map .......................................................96

5.4 Linux Devices Memory Map ................................................96

5.5 Programmable Logic Device (PLD) Registers ..................................98

5.5.1 PLD Revision Register...............................................98

5.5.2 PLD Year Register ..................................................98

5.5.3 PLD Month Register.................................................99

5.5.4 PLD Day Register ..................................................99

5.5.5 PLD Sequence Register..............................................99

5.5.6 PLD Power Good Monitor Register ....................................100

5.5.7 PLD LED Control Register ...........................................100

5.5.8 PLD PCI/PMC/XMC (Slot1) Monitor Register ............................101

5.5.9 PLD PCI/PMC/XMC (Slot2) Monitor Register ............................102

5.5.10 PLD U-Boot and TSI Monitor Register..................................103

5.5.11 PLD Boot Bank Register ............................................103

5.5.12 PLD Write Protect and I2C Debug Register ..............................104

5.5.13 PLD Test Register 1................................................105

5.5.14 PLD Test Register 2................................................106

5.5.15 PLD GPIO2 Interrupt Register ........................................106

5.5.16 PLD Shutdown and Reset Control and Reset Reason Register ..............107

5.5.17 EMMC Reset Register ..............................................108

5.5.18 PLD Watchdog Timer Refresh Register.................................109

5.5.19 PLD Watchdog Control Register ......................................109

5.5.20 PLD Watchdog Timer Count Register ..................................110

5.5.21 PLD Watchdog Timer Count Value Register .............................110

5.6 External Timer Registers .................................................111

5.6.1 Prescaler Register .................................................111

5.6.2 Control Registers ..................................................112

5.6.3 Compare High and Low Word Registers ................................112

5.6.4 Counter High and Low Word Registers .................................114

6 Boot System ...............................................................115

6.1 Overview ..............................................................115

6.2 Accessing U-Boot .......................................................115

6.3 Boot Options ...........................................................116

6.3.1 Booting from a Network .............................................116

6.3.2 Booting from an Optional SATA Drive ..................................117

6.3.3 Booting from a USB Drive ...........................................117

Table of Contents

MVME2502 Installation and Use (6806800R96G) 7

6.3.4 Booting from an SD Card............................................118

6.3.5 Booting VxWorks Through the Network.................................118

6.4 Using the Persistent Memory Feature .......................................119

6.5 MVME2502 Specific U-Boot Commands .....................................120

6.6 Updating U-Boot ........................................................123

7 Programming Model .........................................................125

7.1 Overview ..............................................................125

7.2 Reset Configuration .....................................................125

7.3 Interrupt Controller ......................................................129

7.4 I2C Bus Device Addressing ...............................................130

7.5 Ethernet PHY Address ...................................................131

7.6 Other Software Considerations .............................................131

7.6.1 MRAM ..........................................................131

7.6.2 Real Time Clock...................................................131

7.6.3 Quad UART ......................................................131

7.6.4 LBC Timing Parameters.............................................132

7.7 Clock Distribution .......................................................133

7.7.1 System Clock .....................................................134

7.7.2 Real Time Clock Input ..............................................134

7.7.3 Local Bus Controller Clock Divisor.....................................134

A Replacing the Battery........................................................135

A.1 Replacing the Battery ....................................................135

B Related Documentation ......................................................139

B.1 SMART Embedded Computing Documentation ................................139

B.2 Manufacturers’ Documents ................................................139

B.3 Related Specifications ...................................................140

8 MVME2502 Installation and Use (6806800R96G)

Table of Contents

List of Figures

MVME2502 Installation and Use (6806800R96G) 9

Figure 1-1 Serial Number Location-ENP1 Variant .................................. 30

Figure 1-2 Serial Number Location-ENP2 Variant .................................. 31

Figure 3-1 Board Layout ENP1 Variant ..........................................45

Figure 3-2 Board Layout ENP2 Variant ..........................................46

Figure 3-3 Front Panel LEDs, Connectors and Switches ............................ 47

Figure 3-4 Front Panel LEDs ..................................................48

Figure 3-5 On-board LEDs ................................................... 50

Figure 3-6 Geographical Address Switch ........................................68

Figure 3-7 SMT Configuration Switch Position ....................................69

Figure 4-1 Block Diagram .................................................... 71

Figure 4-2 SPI Device Multiplexing Logic ........................................ 82

Figure 4-3 Clock Distribution Diagram ..........................................89

Figure 4-4 JTAG Chain Diagram ..............................................92

Figure 4-5 RTM Block Diagram ................................................93

Figure A-1 Battery Location ENP1 Variant ......................................135

Figure A-2 Battery Location ENP2 Variant ......................................136

10 MVME2502 Installation and Use (6806800R96G)

Table of Contents

Table des matières

Autres manuels SMART Embedded Computing Ordinateur de bureau

SMART Embedded Computing

SMART Embedded Computing RTM-ATCA-748x-40G Manuel utilisateur

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur