SMART-AVI EZWall-Pro Manuel utilisateur
2
TABLE OF CONTENTS
WHAT'S IN THE BOX? 2
INTRODUCTION 3
FEATURES 3
APPLICATIONS 3
TECHNICAL SPECIFICATIONS 4
HARDWARE INSTALLATION 5
FRONT PANEL CONTROL 6
RS-232 COMMANDS 7
IR REMOTE CONTROL 8
CONTROL VIA ETHERNET 9-11
LIMITED WARRANTY STATEMENT 14
FIRMWARE UPDATE 12-13
WHAT'S IN THE BOX?
PART NO. QTY DESCRIPTION
EZW2X2-S 1 EZWall-Pro: 2X2 Video Wall Con-
troller
CCPWR06 1 Power supply cord
1 Quick Start Guide
EZ-RMT (NEC 38 KHz) 1 IR Remote Control
SM-EYE 1 IR Receiver
Figure 2-1
Figure 2-2
3
INTRODUCTION
Thank you for choosing Smart-AVI EZWall-Pro for your video wall solution. The EZWall-Pro offers top-notch
HD DVI output for five different type of signal inputs. Create striking 2x2 wall displays easily with simple sig-
nal-switching and flexible connectivity. The EZWall-Pro even features a fully-integrated USB media player,
perfect for populating your displays with enticing digital content.
Capable of expanding any supported video input to four large-scale screens at 1080p, the EZWall-Pro show-
cases stunning picture quality and SmartAVI products’ signature ease of use. In this guide, you will learn how
to install and optimize your experience with the EZWall-Pro using basic steps. We will cover setting the hard-
ware up, activating and connecting your systems, and offer helpful tips on how to best use EZWall-Pro’s ex-
cellent selection of picture modes to enhance your video wall. Congratulations again on choosing EZWall-Pro
and SmartAVI as your go-to video wall solution!
FEATURES
·Four screen (2x2) multi-Layout, multi-format video wall controller
·Outputs: (4) DVI single-link
·Inputs: (2) HDMI, (1) VGA, (2) Composite AV, (1) Y/Pb/Pr
·Integrated USB Media Player for digital video, imagery and audio
·Internal EDID learning
·1080p (1920x1080 @ 60Hz) Full HD resolution output
·No additional hardware or software required
·Supports control via Front Panel Buttons
·Supports control via IR Remote control
·Supports control via RS-232
·Supports control via TCP/IP
·HDCP and HDMI 1.4 compliant
·Easy to set-up
·Easy to use
APPLICATIONS
·Corporate or Educational Presentations
·Airport Installations
·Wall Displays
·Digital Signage
·Dealer Rooms
·Control Rooms
·Shopping Centers
·Security
·Point-of-Sale
·Entertainment Venues
·Corporate Lobbies
·Restaurants
4
TECHNICAL SPECIFICATIONS
VIDEO
Output Resolutions Up to 1080P (1920x1080@60Hz)
Input Resolutions Up to 1080P (1920x1080)
Input Video Signal 1.2 volts
Input DDC Signal 5 volts
Outputs (4) DVI-D
DVI Format Single-link
Inputs (2) HDMI, (1) VGA, (2) AV Composite, (1) Y/Pb/Pr, (1) USB 2.0 Type A
HDCP Compliance 1.0/2.0
Audio (1) 3.5 mm input, (1) 3.5 mm output
CONTROL
Front Panel Tactile Switches
RS-232 DB9 Female, 9600, N, 8, 1, no flow control
IR Remote Control EZ-RMT (NEC 38 KHz)
Ethernet (TCP/IP) RJ-45
OTHER
Power 100-240 VAC
Dimensions 17.125” W x 3.5” H x 7.25” D
Weight 7.6 lbs.
USB MEDIA PLAYER USB player requires the IR Remote Control for navigation and media selection.
Signal Type USB 2.0, 1.1, and 1.0 (Type A)
Video Formats * MJPEG, MPEG-1, MPEG-2, MPEG-4, Vvid, DivX H.264
Max Resolution 1920x1080 @30fps
Max Data Rate 20 Mbps
Audio Formats * MP3, WMA, AAC, MP2, PCM, AC3
Photos Max Resolutions * JPEG - 15360x8640, BMP - 9600x6400, PNG - 9600x6400
Other Max TXT resolution: 1200x800
Max ANSI/UNICODE GB/UTF8 file size: 1MB
*PLEASE NOTE: EZWall-Pro only supports the primary formats listed above. Any unlisted formats are not
compatible with EZWall-Pro.
5
HARDWARE INSTALLATION
1. Position EZWall-Pro conveniently and keep it unplugged.
2. Connect DVI output cables between the EZWall-Pro and your video wall screens
3. Connect any input to their corresponding signal source (Blu-Ray player, computer, etc)
4. Optionally connect the IR receiver to the IR input jack at the back of the EZWall-Pro.
5. Optionally connect an RS-232 cable from a PC to the RS-232 port of the unit for additional
control.
6. Optionally connect an Ethernet cable to the EZWall-Pro for additional control over the internet (TCP/IP)
7. Turn on the EZWall-Pro.
8. Wait for a few seconds for the unit to initialize.
Figure 5-1
6
FRONT PANEL CONTROL
To switch to Video Wall mode, press the WALL button.
To switch to Clone mode, press the CLONE button.
To switch between listed sources, press:
1. AV 1
2. AV 2
3. VGA
4. Y/PB/PR
5. USB *
6. HDMI (Press once for HDMI 1 and twice for HDMI 2)
Figure 6-1
Figure 6-2
* USB player requires the IR Remote Control for navigation and media selection.
7
COMMAND DESCRIPTION
//? Help (List of Commands)
//B Boot EZWall-Pro
//C Clone display mode
//I# Select input (# = 1=HDMI1, 2=HDMI2, 3=VGA, 4=AV1, 5=AV2, 6=YPBPR, 7=USB*)
//QA Query IP Address
//QC Query available video Configurations
//QM Query current Mode
//QF Query Firmware version
//QS Query current Status
//V default Video Configuration (2X2)
//W Wall
//Z Sleep
//nxn switch to Video Configuration (//2X1, //3X1, //4X1, //2X2, //1X2 etc.) See Figure 8-2
RS-232 COMMANDS
The EZWall-Pro may also be controlled via RS-232 commands. This feature requires that an RS-232 card is in-
stalled in your computer or a USB to RS-232 adapter. Check the RS-232 connections on your computer and
the EZWall-Pro to determine if you need a male to male, female to female or male to female cable.
Establish a connection to EZWall-Pro:
1. Connect a straight-through RS-232 cable to the RS-232 connector on the PC.
2. Connect the other end of the cable to the RS-232 port of the EZWall-Pro.
3. Power on the device.
If you are using a USB to COM port adapter and need to identify the COM port used do the following:
1. Click on the start button.
2. Click on Control Panel.
3. Click on Device Manager.
4. Click on the arrow next to Ports (COM & LPT).
You should see the name of your adapter and the COM port number in use.
Setting up the Terminal Application:
Run the terminal client of your choice such as HyperTerminal or PuTTY.
Select the correct COM port on the PC.
Use the following connection settings: 9600, N, 8, 1, no flow control.
Once the connection is established type //? And hit enter. The EZWall-Pro should respond with a firmware
version number and a list of available commands.
Figure 7-1
* USB player requires the IR Remote Control for navigation and media selection.
8
Figure 8-1
Figure 8-2
* Note that when not using all four displays the unused displays will
be a clone of output #1
** USB player requires the IR Remote Control for navigation and me-
IR REMOTE CONTROL
BUTTON DESCRIPTION
AV1 Select AV1
AV2 Select AV2
VGA Select VGA Input
YPbPr Select YPbPr Input
HDMI Select between 2 HDMI Inputs. Press
once for HDMI 1 and twice for HDMI 2
USB Select USB Mode **
Center Button USB Mode Enter
▲Volume Up
▼ Volume Down
◄ USB Mode Left
► USB Mode Right
Enter USB Mode Enter
Exit USB Mode Back
Wall Select Wall Mode
Clone Select Clone Mode
F1 Wall Mode
F2 1X2 Mode *
F3 2X1 Mode *
F3 X2 (Press twice) 3X1 Mode *
F3 X3 (Press 3 times) 4X1 Mode
9
CONTROL VIA ETHERNET
EZWall-Pro TCP/IP control is a feature that allows mode switching and other configurations to be controlled
remotely via HTTP. Manage your EZWall-Pro with ease from anywhere in the world.
First you must find the IP address for the EZ-
Wall-Pro. Finder.exe (Smart IP-Finder) is con-
veniently available on our
website;Download and execute the IP
address Finder software for your product.
The EZWall-Pro and its IP address should ap-
pear in the display as shown in Figure 9-1.
Figure 9-1
Enter the IP address into a web
browser of your choice. You
should see the EZWall-Pro Home/
Welcome page as shown in Figure
9-2.
Figure 9-2
10
CONTROL VIA ETHERNET (Continued)
Click on the LOG IN tab in the top tool bar.
Enter the User ID and Password in the Login page.
The User ID and Password are case sensitive.
User ID = admin, Password = 1234
You can change the User ID and password by click-
ing the ADMINISTRATION button. See Figure 10-1
Figure 10-1
Click the Network Settings tab in the top toolbar
to configure your network settings.
See Figure 10-2.
Figure 10-2
Table des matières
Autres manuels SMART-AVI Lecteur multimédia
