9
Setting
1:Full scan
2:Manual tune
3:DRC
Manual tune
01:5A 174.928MHz
02:5B 176.640MHz
03:5C 178.352MHz 5A 174.928MHz
(F.6) (F.7) (F.8)
Note: If there is already an existing DAB station stored under
a preset, it will be over written when you store the new station.
DAB Manual tune
1. Press and hold the MENU/INFO button, and press the TUNE
+ button to select “2:Manual tune”(F.6). And then press the
SCAN button to final confirm.
2. Press the TUNE - / + buttons to move through the DAB
channels, and choose your desired channel and then press the
SCAN button to confirm(F.7),the display will show “5A to 13F”
and their associated frequencies(F.8).
3. When your desired frequency appears on the display, press
the SCAN button to listen, the name of the station group
(ensemble/multiplex) will be displayed.
Note: A“?”next to a radio station name means the station is
inactive or unavailable.
DRC (Dynamic Range Control)
You can set the level of the compression of stations to
eliminate the differences in dynamic range or sound level
between radio stations.
Note:Set DRC to off indicates no compression, set DRC to low
indicates little compression, and set DRC to high shows
maximum compression.
