33
The packing materials (carton, cellophane, staples, polystyrene, etc..) can cut, wound or create hazards
if used improperly or handled carelessly. Store such materials out of reach of children and irresponsible
persons.
This symbol on the appliance or package means that the appliance must not be considered as normal
household refuse but that it must instead be delivered to an appropriate collection centre for the recycling
of electric and electronic appliances.
Read this manual from cover to cover before using the appliance as it contains important instructions
for the safety, operation and maintenance of the appliance. Look after this manual and keep it in a safe
place.
DISPOSAL OF THE UNIT
At the end of its service life, this product cannot be disposed of in normal domestic waste. The symbol on
the product and in the operating instructions point out to this fact. The materials are recyclable according
to your marking. With the reuse, recycling or other forms of recycling of old equipment, you make an
important contribution to the protection of our environment. Please ask your municipal administration for
the disposal point.
The manufacturer reserves the right to make changes to the product and to the manual.
The company cannot be held liable for any damage to people or property resulting from failure to respect
the instructions concerning safety, installation and maintenance contained in this manual.
Before connecting the machine, check that voltage and frequency values of the supply mains correspond
to the ratings indicated on the label featuring the grinder’s technical data.
IT IS COMPULSORY TO EARTH THE APPLIANCE.
Avoid use of multiple-plug adapters and extension cords or makeshift connections.
The Coee Grinder must be installed only by authorised, qualied personnel.
THE COFFEE BEANS HOPPER MUST BE PLACED ON THE APPLIANCE AND PROPERLY FIXED
WITH THE APPROPRIATE SCREW.
If the thermal breaker to protect the motor is triggered, do not attempt any other manoeuvre. Unplug the
machine from the power mains and make sure that any problems have been solved before switching the
machine on again.
It is essential to check the state of the supply cable and plug periodically.
IN THE EVENT THE SUPPLY CABLE OR PLUG ARE DAMAGED, CALL IN SKILLED TECHNICAL
PERSONNEL TO REPLACE THEM, THIS TO PREVENT ANY RISK.
ELECTRICAL INSTALLATION RULE (S64, S75, C68)
Prior to installation, make sure there is a circuit breaker installed with a distance between the contacts
that allows for complete disconnection when there is a category III overload and that provides protection
against current leakage equal or less than to 30 mA. The circuit breaker must be installed on the power
supply in compliance with installation rules.
If the power supply is not working properly, the machine can cause transitory voltage drops.
The electrical safety of this machine is only ensured when it is correctly connected to an ecient earthing
system in compliance with the electrical safety laws in force. This fundamental safety requirement must
be veried. If in doubt, request that a qualied electrician inspect the system. The manufacturer cannot be
held responsible for any damage caused by the lack of an earthing system on the electrical supply.
It is unadvisable to use adaptors, multiple plugs, and/or extension cords. If their use is indispensable, only
use simple or multiple adaptor plugs and extension cords that are in compliance with safety laws. Make
sure these devices do not exceed the voltage capacity marked on the simple adaptor and on extension
cords, and the maximum voltage marked on the multiple adaptor.
PRECAUTIONS AND SAFETY FEATURES
33
