Slide Kamera ATLAS Manuel utilisateur
MODULAR SLIDER
User Manual
pdf version of the manual available for download: www.slidekamera.com
6/2016
2
Table of contents
1. Description of the ATLAS MODULAR slider.................................... 3
2. Construction of the ATLAS MODULAR slider.................................. 3
2.1. Elements of the ATLAS MODULAR slider .............................. 3
2.2. Cart elements .......................................................................... 4
3. Mounting the elements of the ATLAS MODULAR system............... 5
3.1. Connecting the sections .......................................................... 5
3.2. The central port of the cart ..................................................... 6
3.3. Motion end blocks ................................................................... 7
3.4. Adjustable feet ........................................................................ 7
3.5. Centering adapters ................................................................. 7
3.6. ATLAS MODULAR drive ......................................................... 8
4. Mounting additional accessories ..................................................... 9
4.1. Quick release adapter ............................................................. 9
4.2. V-mount batteries ................................................................. 10
5. Usage of ATLAS MODULAR slider ................................................11
5.1. Manual work ..........................................................................11
5.2. Working with ATLAS MODULAR drive .................................. 12
5.3. The ATLAS MODULAR drive and a controlled head ............. 13
6. Technical specication................................................................... 14
7. Terms of warranty.......................................................................... 15
On the margins you will nd
information, which complement the
contents of the manual.
They are not essential for the correct
operation of the device, but you
might nd them useful.
TIP Before you start your work with the ATLAS MODULAR slider we
strongly recommend to read the manual carefully.
Please note that using the adapter in a manner inconsistent with
the instructions, any unauthorized repair attempts or any kind of
modication of the device can cause a damage the manufacturer
is not responsible for.
Slidekamera Ofce
80-175 Gdańsk (Poland)
ul. Kartuska 386
tel./fax (+48) 58 710 41 04
e-mail: [email protected]
www.slidekamera.com
Slidekamera ®
High Engineering Technology CNC s.c.
Sebastian Pawelec Karol Mikulski
Glina 45
82-522 Sadlinki
VAT Identication Number:
581-188-33-32
3
1
2
3
4
44
4
5
5
1. Description of the ATLAS MODULAR slider
The ATLAS MODULAR modular slider was designed for work with heavy
cameras (such as CANON C500, SONY F55, ARRI ALEXA).
ATLAS MODULAR is a modular system. Its construction allows working
with various congurations of length and location, as well as attaching of addi-
tional accessories.
The drive, used in the ATLAS MODULAR slider, is compatible with the
motion control system, manufactured by SLIDEKAMERA. Thanks to this the
motions of the slider and the rotating head (e.g. BULL HEAD) can be simulta-
neously controlled by one controlling device or mobile application.
2. Construction of the ATLAS MODULAR slider
2.1. Elements of the ATLAS MODULAR slider
The ATLAS MODULAR slider was designed in such a way that every user
can adapt its conguration to its own needs.
Below you will nd the construction of a standard set, consisting of 2 sections
and basic accessories.
[1] slider cart
[2] 0,8 m rail
[3] 1,2 m rail
[4] adjustable feet
[5] motion end blocks
NOTE
The contents of the purchased set
may differ from the one, presented
below.
4
1
1
1
1
1
1
1
1
2
3
4
4
5
5
5
6
6
5
2.2. Cart elements
The ATLAS MODULAR slider’s cart is equipped in 12 rollers, made of
specially assorted hardened rubber [1]. Thanks to the proper location of the
rollers the slider can move in a horizontal, inverse, vertical and slanted position.
While working with the slider you can x its position using the park brake
[2]. It is meant only for blocking the position of the dolly and has to be released
before commencing work.
The damping brake [3] generates resistance while moving the slider. It
helps to achieve a precise motion of the slider’s cart, enabling the operator to
acquire a smooth motion.
The slider’s cart and end blocks have integrated magnetic bumpers [4],
which function as brakes when the cart with the camera is reaching the end
of the slider. The magnets gently brake the cart, informing the operator of the
approaching end of ride. Thanks to this the user can focus on achieving the
best shot and not get distracted with controlling the range of the slider’s motion.
Additional accessories can be mounted to the slider’s dolly with magnetic
holders [5]. Some SLIDEKAMERA devices are equipped with compatible
magnetic holders (e.g. wireless SLIDE LINK adapter), some require a special
adapter.
The accessories may be also mounted to the slider’s dolly by screws. Proper
holes [6] are located on the dolly’s frame.
Cart elements:
[1] rubber rollers
[2] park brake
[3] damping brake
[4] magnetic bumpers
[5] magnetic holders
[6] 3/8” thread mounting holes for accessories
Do not treat the damping brake as a
protection from the dolly’s self – mo-
tion, e.g. while working in a slanted
position!
NOTE
5
3. Mounting the elements of the ATLAS MODULAR system
3.1. Connecting the sections
The ATLAS MODULAR allows to mount additional sections in an easy
way to form a 4m, 8m or longer slider, if necessary. Assembly and disassembly
does not require tools.
Before connecting the sections put them on an even and at surface so
that you don’t damage the mounting screws while screwing them in a slanted
position.
Match the sections.
Note: each section has a “left” and
“right” side – one side has centering
pins [1] and mounting screws [2],
the other one – pin holes [3] and
screw holes [4].
Tighten the mounting screws.
It is easier to assemble the sections
with a special key [1], which allows
to tighten the screws with more
force.
You will nd the key [1] in a magnetic
holder in the slider’s cart.
Please remember to put it in the
same place after usage.
1
3
3
4
4
1
2
2
1
1
TIP
In some sets the ATLAS MODULAR
system can be delivered partially
assembled, however the knowledge
of the assembly ways can become
useful when changing the cong-
uration of the device or in case of
non-standard way of transporting.
6
3.2. The central port of the cart
Adapter for heads with 75/100mm half-balls
Heads, which are tted with 3/8” screws have to be mounted on a at
mounting disc [1], equipped with 3/8” screw socket.
Its compact structure allows to lower the center of gravity of devices, mounted
on the dolly and minimize the occurrence of unwanted vibrations.
Tighten the disc to the cart’s frame with 3 Allen screws [2], attached to the
set.
For mounting heads with 75/100mm half-balls
use a special aluminum bowl [1].
• Mount it to the cart’s frame with 3 Allen
screws [2]. If the head has a long mounting
screw and more space under the adapter is
needed, then use the provided distances [3].
First attach the distances, then the adapter.
• If using a 75mm head, tighten a reduction
bush [5] to the adapter with 3 Allen screws
[4].
1
11
1
3
2
2
2
5
Flat mounting plate 3/8”
Apart from the 3/8” screw hole, the
plate has M4 screw mounting holes
compatible with Manfrotto adapters,
which ensure a secure and sta-
ble mounting of adapters, such as
SLIDEKAMERA AKC-3.
TIP
3
2
2
2
3
4
7
• With 4 Allen screws [1] tighten the
centering adapter [2] to the chosen
port of the slider’s rail [3],
• if the slider consists of one section
only, tighten the adapter to the mid-
dle port,
• if the slider consists of several sec-
tions, choose the mounting points
carefully to attain stable support,
• note that each section should be
supported at least in one point,
• to mount the slider on the tripod
place the adapter underneath the tripod’s socket; tighten the adapter as an
ordinary head; use a universal 3/8” screw.
2
2
3
3
4
4
3.3. Motion end blocks
3.4. Adjustable feet
3.5. Centering adapters
To secure the slider’s dolly put the motion end
blocks [1] in the slider’s end sections.
• Fit the end blocks into appropriate centering
holes [2].
• Tighten them with knobs [3], located on the
outer side of the end blocks.
The end blocks also have clamps for mounting
the timing belt of the slider’s drive [4].
• attach the foot’s mounting element
[2] with 4 Allen screws [1] to the
slider’ rail’s end port [3]
• place the regulated feet [4] in the
sockets
• adjust their height and tighten the
clamps [5]
Each section has 4 regulated feet which adjust to the ground. When the set
is standing on the ground, it can be quickly leveled.
The producer provided centering adapters for correct and quick mounting of the
slider to the tripods. The adapters are t for tripod sockets with a diameter of 75
and 100mm. Each section has one 75/100mm centering adapter.
2
2
33
1
TIP
The feet are necessary for the prop-
er functioning of the slider, when it
is standing directly on the ground.
They can be removed to make work
easier when the slider is mounted,
e.g. on a tripod.
TIP
As the feet and the slider’s rails’
ports are equipped with 3/8” sockets
[4] it is possible to mount the tripod
directly to the port.
Such installation is not recommend-
ed for tripods with bowls for mount-
ing 75/100mm half-balls due to the
lack of precision of mounting and a
potential lack of connection stability.
4
5
5
1
1
4
8
1
2
3
1
2
3
3.6. ATLAS MODULAR drive
The drive of ATLAS MODULAR was designed especially for work with the
ATLAS MODULAR slider, that is why it is light and precise and very fast.
Fit the timing belt [4] into the correctly tted drive:
• place its end in the clamp on the motion end block [5] and tighten the
clamps [6],
• conduct the belt through the drive’s wheels [7],
• place the second end of the belt analogically on the second motion end
block,
• stretch the timing belt,
• holding the stretched belt tighten the clamp on the other motion end block.
Connect the cables to the drive:
• connect the power supply [8] (battery or power supply unit) to the DC sock-
et on the side of the device,
• connect a cable [9], connecting the drive to your controller, to the IN input
on the front of the drive.
8
9
4
5
4
7
6
5
6
Assembly the ATLAS MODULAR drive:
• attach the drive [1] to the cart’s frame [2],
• tighten with knobs [3].
Detailed information on connect-
ing and using the controller can be
found in the instruction manual.
TIP
When mounting the timing belt note,
whether the clamp is on the correct
side of the slider – the same one
where the drive’s gear wheel is. If
necessary, place the clamp sym-
metrically on the other side of the
stop [5].
The drive can be also mounted
on the other side of the cart or the
whole cart can be reversed with the
drive.
TIP
9
4. Mounting additional accessories
4.1. Quick release adapter
There are many additional accessories for the ATLAS MODULAR system,
which expand its possibilities. That is why there are standard screw holes on
particular elements of the system, as well as magnetic holders, which allow fast
installation of devices with compatible holders.
For the safety of the equipment, speed of usage and facilitation of transport
SLIDEKAMERA suggests the usage of an adapter for fast head mounting.
Using this adapter prevents loosening of the head while using and damaging
the equipment while mounting (which can happen if the head is tightened in an
incorrect way).
To mount the adapter:
• x the mounting plate [2] on the slider’s dolly [1] (section 3.2, p. 6),
• attach the base of the adapter [3] to the mounting plate [2] with 4 M4
screws [4], included in the set,
• screw the adapter’s plate [5] to the head [6],
• insert the plate into the adapter,
• tighten the clamp screw [7].
In order to remove the head safely (e.g. for transport) it is enough to loosen the
clamp screw and pull out the head together with the plate out of the adapter’s
base.
1
2
3
4 4
5
7
6
TIP
Using the adapter for a fast head
mounting is the only solution, which
guarantees the reassembly of the
head in the same way. It is essential
in case of shots, performed with a
motion control system, when after
disassembly and reassembly of
the head we want to reproduce the
previously recorded motion of the
camera.
10
4.2. V-mount batteries
Devices of the motion control systems require power supply.
The most reliable solution is mains power supply – the user does not have to
worry about the battery level and uses the equipment problem-free. However,
such solution has two aws: it requires cable connection, which sometimes
obstructs the usage of the system and does not work while shooting outdoors,
where there is no access to the mains power supply.
The most comfortable way of providing stable power supply for the de-
vices is connecting them to standard batteries, used in professional cameras.
SLIDEKAMERA offers an adapter for mounting batteries, compatible with the
V-mount lock.
The V-mount battery’s adapter can be used
not only on the slider’s cart. Its universal mount-
ing allows to place the battery e.g. on the re-
mote-controlled heads or on third party devices.
• screw the adapter [1] to the cart’s frame [2]
with the screws [3], included in the set
• place the V-mount battery [4j in the adapter
[1],
• Connect the battery with an appropriate
cable (depending on the kind of the battery
and the powered device) – in most cases it
will be a cable, which connects the battery’s
D-tap socket and the DC socket of the pow-
ered device; appropriate cables and adapt-
ers can be found in SLIDEKAMERA offer.
2
1
4
3
Table des matières
