Skywalker SEK1200 Guide rapide
USER MANUAL
Skywalker Holdings LLC
P.O. Box 574, Brigham City, UT 84302
ASSEMBLY, MAINTENANCE, &
MODEL #SEK1200 / SEK1500
WARNING
Read all precautions and instructions in
this manual before using this equipment.
Save this manual for future reference.
Maximum user weight 200 lbs.
Part List...........................................................................................................................................................................3
Part Identification....................................................................................................................................................4
Exploded Drawing....................................................................................................................................................5
Enclosure Net Removal......................................................................................................................................6
Assembly...................................................................................................................................................................7-11
Other Accessories.................................................................................................................................................12
Limited Warranty......................................................................................................................................................13
TABLE OF CONTENTS
IMPORTANT
Trampolines and enclosures are susceptible
to winds. Be sure to secure your trampoline
and enclosure. Wind damage is not covered
in the warranty of your trampoline.
WARNING
CHOKING HAZARD- Small
parts not for children
under 3 years.
WARNING
Adult assembly required.
2
STOP EVERYTHING YOU'RE DOING AND REGISTER YOUR TRAMPOLINE
Find our warranty registration online by typing in: www.skywalkertrampolines.com/registration/
You'll need to have the following information handy:
• Name • Email address
• Address • Trampoline model number
• Phone number • Trampoline serial number
• Date of purchase • Retailer the trampoline was purchased from
HEY WE'VE GOT SOMETHING REALLY IMPORTANT TO SAY
And that is... check us out online! We've got assembly videos (for those of you who prefer movies over books), FAQs
(so you know you're not the only one who messed up), fascinating blog posts (did you know jumping burns more
calories than running?), and most importantly... find us on social media! Because we want to be your friend. We'd love
to hear from you, friend.
Website: skywalkertrampolines.com
Facebook: facebook.com/skywalkertrampolines
YouTube: youtube.com/c/SkywalkerTrampolines
Pinterest: pinterest.com/swtrampolines
Twitter: twitter.com/swtrampolines
Instagram: instagram.com/skywalker_trampolines
Key No. Qty. Description
1 1 Enclosure Net
2 6 Straight Tube
3 6 Curved Tube
4 12 Foam
5 6 End Cap
6 6 Self-tapping Screws
7 1 Screw Driver
# 1 User Manual & Safety Placard
# 1 Set of ASTM Labels
PART LIST
ORDERING REPLACEMENT PARTS
We get it... sometimes things happen. But the fun shouldn’t stop just because you need a new bolt or screw! To order
replacement parts, check out our website at: www.skywalkertrampolines.com or call our toll-free Customer Care
Hot-line at 1-866-603-Jump (5867), Monday - Friday, 8 a.m. until 5 p.m. Mountain Time (excluding holidays).
Our customer service team will ask you a few questions in order to get the replacement part sent out as soon as
possible. We’re not trying to complicate your life, we promise.
When calling, make sure to have the following information ready:
• The model # of the product (see the front cover of this manual)
• The key # and description of the part (see the part list above)
• The quantity needed (only you know the answer to that one!)
BEFORE YOU BEGIN
Thanks for choosing Skywalker Trampolines! We’re just as excited as you are to help your family live an active (but
most importantly FUN) lifestyle. This model is one of our favorites, and we’re confident you’ll love it too. To make
things easier for you, we’ve listed important information that you (and your little outdoor adventurers) need to know.
Make sure you brush up on the warnings, instructions, assembly, maintenance, and use of your new product...
because there will be a pop quiz at the end! (Okay, not REALLY, but if you’re still reading this, props to you! You’re
awesome). 3
Note: Pole caps and pole cap bolts are not included in this kit.
4
Before you begin, take a look at the drawings below to make sure you have all the parts! The numbers in the squares
to the left (key numbers) will help you identify the parts during assembly.
PART IDENTIFICATION
1Enclosure Net (x1) 2Straight Tube (x6) 3Curved Tube (x6)
4Foam (x12) 56
7
Self-tapping Screw
(x6)
End Cap (x6)
Screw Driver (x1)
EXPLODED DRAWING
5
(1)
(2)(4)
(4)
(4)
(4)
(4)
(4)
(6)
(6)
(6)
(6)
(6) (6)
(4)
(4)
(4)
(4)
(4)
(2)
(2)
(2)
(2)
(2)
(5)
(5)
(5)
(5)
(3)
(3)
(3)
(3)
(3)
(3)
ENCLOSURE NET REMOVAL
STEP 2
You’re now ready for the best (or worst depending on if you’re a pessimist) part of all... de-springing your
trampoline. You may want to use gloves for this step! Using the spring tool, hook the end of any spring that’s
attached to the frame. Pull back and stretch the spring until it’s free from the frame, and releases back to its
normal shape. Continue detaching springs until all have been removed, and set the springs aside. Now, all you
need to do is separate the jump mat from your old enclosure net, and you’re ready for assembly!
STEP 1
First thing’s first... you’ll need to remove the end caps from the bottom of the sockets, and pull upwards to take
down the enclosure poles. Helpful tip: When removing the enclosure poles, pull back on the middle of the poles!
Once the enclosure poles are down, unscrew the bolts in the pole caps to remove the enclosure net from the
pole caps. Next, all you’ll need to do is remove the frame pad, and place the frame pad, pole caps, and the
enclosure poles aside.
Socket
End cap
Bolt
Pole cap Frame pad
Enclosure pole
6
7
Warning label
First hole
First V-ring
1 2
3
4
STEP 2
You may want to use gloves for this step! Place the jump mat on clear ground inside the frame. Make sure the
two warning decals align with two T-joints! Using the spring tool, hook the smaller end of a spring into the
V-ring just left of the enclosure door. Stretch the free end of the spring until it reaches the frame hole just left
of the T-joint.
STEP 1
ASSEMBLY
Place the jump mat on the ground. The warning label should be on top, and
the ID label should be on back. Now place the enclosure net on the jump
mat, and make sure the first hole and the first V-ring line up. The first hole is
the hole to the left of the enclosure door zipper. The first V-ring is the V-ring
to the left of the warning label. Now insert the first V-ring into the first hole.
Then, insert the remaining V-rings into their corresponding holes.
Enclosure door
First V-ring
First hole
T-joint
T-joint Warning label
T-joint
Enclosure Net (x1)
1
8
STEP 3
Now, repeat step 2 on the other side of the trampoline. Make sure to count the exact number of V-rings and
frame holes so each one corresponds!
Next, place a spring into the V-ring just left of the nearest T-joint, and stretch the spring until it reaches the
frame hole just left of the T-joint. Now, repeat this step on the remaining T-joints.
STEP 4
Next, place springs into the V-rings just left of all the sockets, and stretch the springs until they reach the
frame holes just left of the sockets. Now, place one spring directly to the left of each spring already placed.
Continuing in a clock-wise direction, attach the remaining springs to the remaining V-rings and frame holes
until all springs have been placed.
T-joint
T-joint
Enclosure door
Socket
Enclosure door
ASSEMBLY
9
STEP 5
Now that you’ve installed the jump mat, place the frame pad on top of the springs. Adjust the frame pad so
that the slits are directly above the T-sockets. Important: Don’t use the trampoline without the frame pad. It’s
designed to protect your little jumpers! Trust us on this one. Next, find the straps that are attached to the
underside of the frame pad, and tie all of the straps in bows. (Because if you tie them in knots, you’ll have a
pretty hard time untying them ever again!)
Socket
Slit of Pad
Frame Pad
Inner strap
Underside of trampoline
Outer strap
STEP 6
If you want, take a snack break because you’re MORE THAN
HALFWAY DONE, and you deserve it. This next step is easy.
Just slide all the straight tubes (2) and curved tubes (3) into
foam (4). If you’re having trouble getting the foam over the
tubes, try adding a small amount of water inside the foam!
Straight
Tube (x6) Curved
Tube (x6)
23Foam (x12)
4
(4)
(4)
(2)
(3)
10
STEP 7
Insert one straight tube (3) into one curved tube (4), and secure with one
self-tapping screw (6).Important: On the curved tube there is one end that
has two holes. Make sure that end is on top!
Repeat this step to attach the five remaining straight tubes and curved
tubes together.
Self-tapping Screws (x6)
6
(3)
(4)
(6)
Two holes
ASSEMBLY
STEP 8
Insert the pole caps into the strap rings found on the top of the net. Make sure the hexagon holes of the pole
caps are facing the net, and the regular holes are facing you. Next insert one of the enclosure poles into the
pole caps. Make sure the bent side of the enclosure poles are facing towards the center of the trampoline.
Make sure the holes on the poles, pole caps, and strap rings are all aligned. Then insert bolts to secure in place.
Important: Make sure the bolts go into the round holes (not the hexagon holes) or you could break the pole caps!
Hexagon hole
Regular hole
Strap
Bolt
Pole cap
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Skywalker Équipements de jeux et d'aires de jeux
Manuels Équipements de jeux et d'aires de jeux populaires d'autres marques
Ledon
Ledon 302040 Manuel utilisateur
FUNormous
FUNormous Disney Junior MICKEY MOUSE Manuel utilisateur
b4Adventure
b4Adventure Slackers TREEZONE ADVENTURE THREE HOUSE Manuel utilisateur
PoolMaster
PoolMaster 72775 Manuel utilisateur
Palmako
Palmako 4743142009857 Manuel de l'installateur
BOERPLAY
BOERPLAY PSTE000.019 Manuel utilisateur
