Skyview CMS Manuel utilisateur

Contents

1.0 CMS FUNCTIONS.......................................................................................3

2.0 INSTALL CMS..............................................................................................3

3.0 START CMS.................................................................................................5

3.1. Top Toolbar..................................................................................................7

3.2 Top Menu Bar...............................................................................................7

3.3 Toolbar on Right Side...................................................................................7

3.4 Video Area ...................................................................................................8

3.5 Bottom Toolbar.............................................................................................9

4.0 MENU AND MOUSE OPERATION..............................................................9

4.1 File ............................................................................................................ 10

4.2 Tools.......................................................................................................... 10

4.3 Help........................................................................................................... 20

4.4 Mouse Operation ...................................................................................... 20

5.0 REAL-TIME VIDEO DISPLAYAND CONTROL....................................... 21

5.1 Real-Time Video Frame Control............................................................... 21

5.1.1 Displaying Mode Switching................................................................. 21

5.1.2 Display Control ................................................................................... 22

5.2 Pan/Tilt/Zoom Controlling ......................................................................... 22

5.3 Device Information.................................................................................... 23

Center Management System (CMS) is an integrated network monitoring manage

software, which can run independently and manage several digital video recorder,

monitor video, capture, record, playback, download setup parameters and control

pan/tilt, etc. It is applicable management platform for medium and relatively large

network video monitoring.

1.0 CMS Functions

This CMS can mainly realize following functions:

Real-time video display: it can display real-time video images of 1-64 channels one

page within monitoring network. It can realize single frame, 4-frame, 9-frame, 16-frame

partition display, 64-frame partition display. Also it can support multiwindow full screen

and single window full screen display.

Pan/tilt controlling: within authorized range, the orientation, pitching angle and focus

of the camera can be changed by the control of front end pan/tilt and lens

Remote Video Recording: video file can be stored in build-in hard disk of DVRs by

setting recording time..

Local video recording: Videos can be record in CMS at any time you start up local

recording.

Real-time video image capture: it is auxiliary function for real-time monitoring. It will

save the single frame from dynamic images in BMP format, and it can capture images

during monitoring or playback.

Audio monitoring: CMS-side can monitor the audio of front-end device.

Local playback: video files of devices at any time in the recording can be retrieved and

replayed.

Remote playback: to retrieve, replay and download the recording files in front-end

device or other recording files in CMS.

Remote setting: Set up parameters at CMS-side.

2.0 Install CMS

★Operating Environment:

Operating system: Windows XP，Win 7

Network protocol: TCP/IP

CPU: P4/3.0G

RAM Requirements: 2.0G (We recommend using 2.0 G and the RAM should be

above 1.0G for normally running)

Network Card; 100/1000M

Graphics Card: It should support hard ware zoom (such as: ATI, TNT2 PRO). We

recommend you use graphic card above ATI9800 and video memory above 128M

★Installation Guide:

★Open folders of management software and run (double click left button of the

mouse) “ViewCms.exe”, and then the following dialogue box will appear as first Fig

shows and click “Next” , there will be dialog show as second Fig.

Next, select the destination folder to save the install file and follow the prompt of

installation tool until the appearance of the step displayed as following. Click [Finish] to

complete the installation.

3.0 Start CMS

Choose the software in [Start] menu----program groups-----ViewCMS-----ViewCMS-----

ViewCMS, which is showed as following:

When you open this

screen, it will show this

dialog box,choose “yes”

or “no”depends on your

need..

Run CMS by clicking the left button of the mouse, and interface as following will appear:

3.1. Top Toolbar

You can manually choose different icons as following picture:

【DEV MANAGE】: After clicking this icon, you can add project, area and device.

When you add device, you should set device name, fill in IP address, port, username

and password.

【PLAYBACK】:After entering, you can select device and defined period to retrieve

recorder video files in remote and playback the files.

【LOCAL SETUP】: After entering, you can set your record path, capture path and file

path.

【REMOTE SETUP】:Click this icon to enter into setup interface, this interface include

encode, record, device alarm, channel alarm, PTZ setting, network, mobile, Email, user

management, system setting, HDD management and version information.

【EXIT SYSTEM】: Click this icon to exit system.

3.2 Top Menu Bar

In top menu bar, there are three menu items such as File, Tools and Help. They

include the main functions of setting, playback and manipulation in this software. It’s

showed as follows:

3.3 Toolbar on Right Side

There are two tabs on right side. The first one displays device information. You can

get project, area and device information from this tab. You can spread out it by

left-clicking it, choose one channel and drag it to video area to monitor this channel. If

the channel is being monitoring, the icon turn to green as . If it is

disconnected, the icon will be grey.

The second tab is Pan/tilt control button. You can control high speed dome.

3.4 Video Area

Choose the real-time video of one channel in video display area, and click right button

on selected video screen. System pops up a menu as follows:

According to the menu, operations can be done such as remove preview, start or stop

record, image capture, multiwindow full and single window full.

REMOVE PREVIEW WINDOW: If you choose this button, the video you selected

won’t be displayed until you connect again.

START RECORD: Choose it to start local recording which is to save videos in AVI

format under appointed folder of local monitoring host. The path of save can be

modified in ‘Tools’ menu—‘local setup’.

STOP RECORD: Choose it to stop local recording.

CAPTURE: This is a real-time video capture function, which is to save single-frame

images from dynamic images in BMP format under appointed folder of local monitoring

host. The path of save can be modified in ‘Tools’ menu—‘local setup’.

MULTIWINDOW FULL: Display multiwindow in full screen

SINGLE WINDOW FULL: Display single window in full screen.

3.5 Bottom Toolbar

【Multi-frame controlling】: 1-frame, 4-frame, 9-frame, 16-frame, 64-frame

【Full screen】: Video image displayed on the screen will be maximized, it contains

multi-window in full screen and single window in full screen.

【Image Capture】Instant image of current channel can be captured

【Record Start/Stop】: Start or stop local record, which is to save videos in AVI format

under appointed folder of local monitoring host. The path of save can be modified in

‘Tools’ menu—‘local setup’.

【Mute On/Off】:Turn on or turn off sound.

【Version】: Version information.

4.0 Menu and Mouse Operation

CMS is composed of three parts: File, Tools and Help.

Multi-frame controlling

Full Screen

Image Capture

Record Start/Stop

Mute On/OFF

Version

4.1 File

By “File” menu of CMS operations like “Exit system” can be carried out. Picture

showed as following:

Exit System: exit CMS program.

4.2 Tools

“Tools” menu is mainly used to manage device, playback files, setup local setting and

remote setting. Showing as following picture:

Device Manage: mainly used to manage device. It can be achieved by clicking

“Device manage” button in the top toolbar and the function is the

same.

Click right button of the mouse in device management window, and choose “Add

Projects” in pop-up menu. Choose “Add Area” for newly built project by clicking right

button after entering the name, then click right button for newly built group and choose

‘add device’.

When you are adding new device, you should set a device name, fill in DVR’s IP, port,

username and correct password.

Table des matières

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur