Skyros VideoNet 9.1 Manuel utilisateur

SKYROS Corporation VideoNet Web Server 2.1 Руководство пользователя

РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

Installation manual

SKYROS Corporation VideoNet 9.1

This document is for information purposes only.

SKYROS Corporation offers no extra warranties concerning the information

provided herein.

VideoNet®, TinyVN4, PowerVN4, TitanVN8, PowerVN8, TitanVN16, DVPack™

and the documentation related to them are protected by Copyright of SKYROS

Windows is a registered trademark of Microsoft Corporation (of the USA or

other countries).

HASP is a registered trademark of Aladdin Knowledge Systems Ltd. Conexant,

Fusion 878A, and CX23880 are the trademarks of Conexant Systems, Inc.

Intel and Pentium are registered trademarks and MMX is a trademark of Intel

Corporation.

Any other trademarks, brands, and product names used in this document are

the trademarks of their respective owners.

VideoNet 9.1

January 2017

SKYROS Corporation

Telephone: +7-800-505-01-00

+7-812-448-10-00

+7-812-448-10-10

Fax: +7-812-448-10-12

Web: [email protected]

www.videonet9.com

SKYROS Corporation VideoNet 9.1

Installation manual

CONTENTS

1. TECHNICAL REQUIREMENTS TO THE SYSTEM...........................................3

2. ACTIONS SEQUENCE DURING VIDEONET INSTALLATION.........................4

3. HARDWARE INSTALLATION ...........................................................................4

3.1. Video/audio blasters types...........................................................................5

3.1.1. PowerVN4 Pro2 video/audio capture card .........................................8

3.1.2. PowerVN4 Pro3 video/audio capture card .......................................16

3.1.3. PowerVN4 Pro4 video/audio capture card .......................................18

3.1.4. PowerVN4-AHDM video/audio capture card ...................................20

3.1.5. PowerVN8 / PowerVN8 LP video/audio capture card .....................22

3.1.6. PowerVN8-AHDM video/audio capture card....................................25

3.1.7. PowerVN8-HD video/audio capture card ......................................... 27

3.1.8. TitanVN8 video/audio capture card .................................................. 29

3.1.9. TitanVN8 Pro video/audio capture card ...........................................31

3.1.10. TitanVN16 / TitanVN16 Rev. 1.4 video/audio capture card ............33

3.1.11. TinyVN4 Pro2 video/audio capture card .........................................36

3.1.12. TinyVN4 Pro3 video/audio capture card.........................................37

3.1.13. Additional panels ............................................................................39

3.1.13.1. Additional video inputs MB-BNC4 panel .......................... 39

3.1.13.2. Additional video inputs MB-BNC4 AGC panel .................40

3.1.13.3. Additional audio inputs MB-RCA4 panel.......................... 41

3.1.13.4. Additional video/audio inputs MB-DB25 panel................. 41

3.1.13.5. Additional video/audio inputs MB-DB25 AGC panel ........43

3.1.13.6. MB-RIO 4/16 unit of relay outputs and insulated inputs...44

3.1.13.7. MB-RIO 4/16 - USB rev.3.1 card of relay outputs and

insulated inputs ................................................................47

4. SOFTWARE INSTALLATION ..........................................................................50

4.1. Initial software installation ..........................................................................50

4.1.1. VideoNet Autostart Service ..............................................................60

4.2. Archive Conguration Parameters .............................................................61

4.3. Windows User Rights.................................................................................64

4.4. Interaction of the VideoNet 9.1 with the older VideoNet systems ..............64

4.5. Security of the VideoNet system................................................................65

4.6. Software Removal......................................................................................65

5. CONNECTING EXECUTIVE DEVICES ...........................................................67

5.1. Connecting Panasonic WV CS850, Panasonic WV CS600 cameras .......68

5.2. Connecting LiLin PIH7000/7600 dome cameras ......................................68

5.3. Connecting Fastrax dome cameras ..........................................................69

5.4. Connecting Pelco DD5 dome cameras .....................................................69

5.5. Connecting Samsung SCC-643 dome cameras .......................................70

5.6. Connecting KT&C cameras by the example of KPC- 202CZH .................. 71

5.7. Connecting HITACHI D-7722 dome cameras ...........................................71

5.8. Connecting JVC TK-C676 dome cameras ................................................72

5.9. Connecting Galact dome cameras ............................................................72

5.10. Connecting GANZ ZC-S122/123 dome cameras ....................................73

5.11. Connecting CNB cameras .......................................................................73

5.12. Connecting Panasonic WV-CU650 system controller..............................74

Installation manual

SKYROS Corporation VideoNet 9.1

1. TECHNICAL REQUIREMENTS TO THE SYSTEM

Hardware and software requirements for the computer on which the VideoNet

system will be installed are as follows:

Attention! Antivirus software that automatically scans les on the computer can

signicantly reduce the system’s recording and playback performance. In case

of using such software, it is recommended to (depending on available settings):

• disable the check of volume les (.vnsd);

• disable the check of all les, leaving only the check of program les;

• disable the check of the disks on which volume les are located;

• disable automatic check for all disks.

CPU Minimum: Intel Core i3 530 processor

Recommended CPU parameters depend on the required number of

connected cameras.

RAM Minimum: 2 GB for 32-bit OS and 4 GB for 64-bit OS

For 64-bit operating system is recommended: 8 GB for systems with up to

16 cameras, 16 GB for systems with up from 16 cameras to 32 cameras,

32 GB for systems with over 48 cameras

Attention! When you use video capture cards, the PAE mode must be disabled.

Attention! Pre-recording requires additional RAM size (see Section 3.2.2.5 of the

User guide).

Operating

system (32 bit)

Windows 7 SP1 (Professional, Ultimate, Enterprise), Windows 8 (Core,

Pro, Enterprise), Windows 8.1 (Core, Pro, Enterprise), Windows 10 (Home,

Pro, Enterprise)

Operating

system (64 bit)

Windows Server 2008 R2 SP1, Windows Server 2012, Windows Server

2012 R2, Windows Server 2016, Windows 7 SP1 (Professional, Ultimate,

Enterprise), Windows 8 (Core, Pro, Enterprise), Windows 8.1 (Core, Pro,

Enterprise), Windows 10 (Home, Pro, Enterprise)

Note: Only PowerVN4/8-AHDM, PowerVN8, PowerVN8-HD, TitanVN16 capture cards

and cards with Cx2388x chip are supported.

Graphics card Minimum: OS-determined (128 MB, DirectX 9 support)

Note: To select the graphics card chipset manufacturer, it is recommended to use the

list of tested equipment (Support).

Display Minimum: 1280х1024

File system NTFS; it is recommended to use a 64 KB cluster size for formatting the

disks on which video archive volume les are placed.

Attention! Other le systems are not supported.

Note: It is recommended to disable the system recovery feature on logical disks on

which video archive volume les are placed.

Note: It is recommended to install Battery BackUp Unit, if you use RAID controllers.

Database

Management

Systems Used

Microsoft SQL Server 2008

Microsoft SQL Server 2008 R2

Microsoft SQL Server 2012

Microsoft SQL Server 2014

Microsoft SQL Server 2016

Attention! Starting resource-intensive applications on the same computer may

adversely affect the VideoNet system’s performance. It is not recommended

to install third-party applications, other than those which are part of Windows,

on this computer.

SKYROS Corporation VideoNet 9.1

Installation manual

2. ACTIONS SEQUENCE DURING VIDEONET INSTALLATION

To install VideoNet system it is necessary to perform the following actions:

1. Switch off your computer.

2. Install inyVN4, TinyVN4 Pro, TinyVN4 Pro2, TinyVN4 Pro3, PowerVN4,

PowerVN4 Pro,PowerVN4 Pro2, PowerVN4 Pro3, PowerVN4 Pro4,

PowerVN4/8-AHDM, PowerVN8, PowerVN8-HD, TitanVN8, TitanVN8 Pro

or TitanVN16 video capture cards (refer to 3.1 section). Install if necessary

additional video/audio inputs panels or additional panels for working with relay

outputs and alarm sensors (refer to 3.1.12 section). Connect also necessary

executive devices (dome cameras, refer to chapter 5).

3. Switch on your computer.

4. Launch VideoNet Installation wizard (refer to chapter 4).

5. Put HASP key into USB port of your computer only at the request of VideoNet

Installation wizard.

6. Restart your computer after completing the installation process.

3. HARDWARE INSTALLATION

Computer, to which CCTV cameras and microphones will be connected, must have

one or more video blasters of Tiny, Power or Titan family installed. Third-party

manufactured video blasters on Conexant Fusion Bt878, Bt878A, Bt879 chips

To improve the VideoNet system’s performance, it is recommended to install

Microsoft DirectX Version 9.0c or later on the computer. You can nd the

DirectX setup program on Microsoft’s website.

Attention! The work of audio/video capture cards with Bt chips on the last

generations motherboards is not guaranteed.

If you want to add capture cards to the VideoNet system conguration and

you are using Windows 7 SP1 or Windows Server 2008 R2 SP1, the update

KB3033929 must be installed on your computer. You can nd the update on the

installation disk or on Microsoft’s website (https://technet.microsoft.com/en-us/

library/security/3033929.aspx).

Attention! It is not recommended to use Punto Switcher when you work with

VideoNet.

Attention! When working with VideoNet system, it is recommended to use a

64-bit operating system.

To learn more about the hardware requirements for your VideoNet surveillance

solutions, you can use a calculator on the website http://www.videonet.ru.

Attention! The integration of FSA controllers into VideoNet 9.1 system is carried

out only on the computers running the Windows 7 SP1 operating system in

accordance with the NVP “Bolid” requirements. You can nd the requirements on

the NVP “Bolid”website (http://bolid.ru/production/orion/po-orion/po-integration/

modul_upr_s2000.html#characteristics).

Installation manual

SKYROS Corporation VideoNet 9.1

3.1. Video/audio blasters types

Table 1. Video/audio blasters types.

Power Titan Tiny

cards with Bt8xx chip VN4

VN4 Pro VN8 VN4

VN4 Pro

cards with Cx23880

chip

VN4 Pro2

VN4 Pro3

VN4 Pro4

VN8 Pro VN4 Pro2

VN4 Pro3

cards with DSP TMS VN8 VN16

cards with NVP6114

chip VN4/8-AHDM

cards with RN6318A/

RN6598 chip VN8-HD

Parameters Tiny family Titan family

VN4 VN4 Pro VN4 Pro2 VN4 Pro3 VN8 VN8 Pro VN16

Chip Bt8xx Bt8xx Cx23880 Cx23880 Bt8xx Cx23880 TMS

Number of chips 1 1 1 1 8 8 4(16)***

Motherboard slot PCI

32/33

PCI

32/33

PCI

32/33

PCI

32/33

PCI

64/66 PCI-E PCI-E

Video inputs in

real-time mode 1 1 1 1 8 8 8 – 16 **

Switchable video

inputs 4 4 4 4 32 32 32

S-Video inputs – – 1 1 – 8 –

Audio inputs 1 1 2 2 8 16 16

Alarm sensors – 16 – 16 32 32 32

Relay outputs – 4 – 4 8 8 8

LEDs – + – + + + –

Watchdog timer – + – + + + +

MB-RIO 4/16

connection – 1 – 1 2 2 2

MB-BNC4

connection – – – – + + –

are also supported. All drivers for mentioned video blasters will be installed during

the installation process. Using third-party manufactured drivers of third-party for

mentioned video blasters is not permitted. Before starting the installation process,

make sure that there are no third-party manufactured drivers. Otherwise, it can cause

incorrect installation, leading to the operation system inoperability.

SKYROS Corporation VideoNet 9.1

Installation manual

Table 3. Parameters of video/audio blasters of Power family.

MB-RCA4

connection + + + + + + +

MB-DB25 (video)

connection – – – – + + +

MB-DB25 (audio)

connection + + + + + + +

Connecting panel

for working with

S-Video

– – + + – + –

Table 2. Parameters of video/audio blasters of Titan and Tiny families.

Parameters

Power family

VN4 Pro2 VN4 Pro3 VN4 Pro4 VN4/8-

AHDM VN8 VN8-HD

Chip Cx23880 Cx23880 Cx23880 NVP6114 TMS RN6318A/

RN6598

Number of chips 4 4 4 1/2 2(8)*** 1

Motherboard slot PCI

64/133 PCI-E PCI

32/66 (*) PCI-E PCI-E PCI-E

Video inputs in real-

time mode 4 4 4 4/8 4 – 8 ** 8

Switchable video

inputs 16 16 16 – 16 –

S-Video inputs 4 4 4 – – –

Audio inputs 8 8 8 4 8 4

Alarm sensors 16 16 16 –/16 16 16

Relay outputs 4 4 4 –/4 4 4

LEDs + + + – – –

Watchdog timer + + + – + –

MB-RIO 4/16

connection + + + –/+ + +

MB-BNC4 connection + + + – – –

MB-RCA4 connection + + + – + –

MB-DB25 (video)

connection + + + – – –

MB-DB25 (audio)

connection + + + – + –

Connecting panel for

working with S-Video + + + – – –

Installation manual

SKYROS Corporation VideoNet 9.1

By installation this card into motherboard slot, supporting 64/66 standard, bus

capability remains 66 MHz.

Number of inputs in real-time mode depends on license. In detail VideoNet license

restrictions are described in the 2.3 section of the User guide.

The number specied is the number of chips and ADCs contained in them. The

number of chips in video capture cards with Bt and Cx chips is equal to the

number of ADCs.

***

Attention! For 32-bit systems, it is recommended to add to the VideoNet

conguration only that amount of video capture cards with Bt chips, that contain

no more than 8 chips in total.

Attention! You can learn about the parameters PowerVN4 and PowerVN4 Pro

cards in the documentation to VideoNet 8.9 Service Pack 1 and earlier systems.

SKYROS Corporation VideoNet 9.1

Installation manual

3.1.1. PowerVN4 Pro2 video/audio capture card

PowerVN4 Pro2 card is a video/audio capture device, intended for digital capture

of audio and video signals, received from cameras and microphones, connected to

it. Also the card is a sensors controller and a relay outputs controller, and thereby

enables to control sensors and relay outputs, connected to its inputs.

Cameras, transmitting composite signal or signal in S-Video format, are to be

connected to video inputs. Microphones are to be connected to audio inputs.

Connecting relays and sensors to corresponding card outputs/inputs is performed

through additional panels MBRio.

The card consists of 4 independent CX23880 devices, intended for digital capture of

audio and video signals. Each device can work independently both in the switchable

mode (12 fps) and in the non-switchable mode (25 fps). Thus, maximum frame ow

for a card is 100 fps.

On the card there are:

• 4 main video inputs for working with composite video signal in the real-time mode;

• 12 additional video inputs for working with composite video signal in the

multiplexing mode (these inputs can be used for working with brightness

component of S-Video signal);

• 4 inputs for working with colour-difference component of S-Video signal;

• 8 inputs for working with audio signal;

• 4 relay outputs and 16 alarm sensors inputs.

PowerVN4 Pro2 card must be installed into the PCI slot of motherboard of your

computer.

The card diagram is shown in the picture 3.1.1:

•main (1) and additional pin connectors for composite video signal (2) and for

S-Video signal (3);

•jumpers for switching on/off 75 Ohm load (4);

•audio inputs (5)

•connectors for sensors and relay outputs (6);

•LEDs pins (7);

•Watchdog timer pins (8).

PowerVN4 Pro2 card supports working both with S-Video signal and with composite

signal.

For composite signal inputs 1-4 are used in the non-switchable mode and inputs

5-16 are used in the switchable mode.

For working with S-Video signal S1-S4 video

inputs are used for the colour-difference

component (S-Video chroma) and appropriate

14, 11, 8, 5 video inputs are used for brightness

component (S-Video luma). When connecting it

is necessary to use an additional video inputs

panel for working with S-Video signal.

Attention! CX23880 chip, working in S-Video

mode, can’t simultaneously work with composite

signal.

For working with audio signal A1–A8 inputs are used.

There are 4 video inputs on each CX23880 device on the PowerVN4 Pro2 card.

Installation manual

SKYROS Corporation VideoNet 9.1

Let’s consider connecting cameras and microphones to PowerVN4 Pro2 video/

audio capture card with specic reference.

A. If you want to connect 4 cameras for working in the real-time mode (25 fps)

1. Connect 4 cameras to the card main inputs (1-4 inputs in picture 3.1.1). During

such connection each of four CX23880 devices will work in the real-time mode

and ow by each camera will be 25 fps.

Use if necessary additional MB-BNC4 and MBDB-25 panels for video signals

connection or additional MB-RCA4 and MBDB-25 panels for audio signals

connection.

Use additional MB-RIO 4/16 units for working with alarm sensors and relay

outputs.

Picture 3.1.1. PowerVN4 Pro2 card connectors location.

Correspondence between inputs numeration on the card and in the VideoNet system

is shown in the table below:

CX2388х device number

Video inputs numeration

4, 5, 6, 7

3, 8, 9, 10

2, 11, 12, 13

1, 14, 15, 16

Audio inputs numeration

1, 2

3, 4

5, 6

7, 8

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Skyros Système de sécurité

Skyros

Skyros VideoNet Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur