SKY-LASERS Handheld Series Manuel utilisateur

www.SKY-Lasers.com

Handheld Series Operation Manual

www.SKY-Lasers.com

Laser Diagram

Technical Specications

Laser Operation

Laser Safety

Maintanence

Limitation of Liability

Warranty

TABLE OF CONTENTS

LASER DIAGRAM

Handheld Series Operations Manual | Page 1

www.SKY-Lasers.com

12 Months

Series:

Dimension:

Weight:

Laser Class:

Available Colors:

Wavelength:

Power Output:

Beam Diameter:

Beam Divergence, Full Angle:

NOHD:

Required Eyewear:

Power Consumption:

Power Supply:

Battery Lifetime:

Mode/Switch:

Duty Cycle:

Diode Lifetime:

Warranty:

Handheld Series

Φ23.5mm x 180mm

120 grams

3B / 4

Violet, Blue, Green, Red, Infrared

405nm | 445nm | 515nm | 532nm | 635nm | 650nm | 808nm | 980nm

100 - 500mW | 500 - 1000mW | 30 - 50mW | 100 - 300mW | 100 - 180mW | 100 - 300mW | 300 - 1000mW | 200mW - 800mW

< 2.5mm | < 2.5mm | < 2.5mm | < 2.0mm | 4 x 4mm | 4 x 4mm | 3 x 3mm | < 2.5mm

24 - 53m | 53 - 75m | 13 - 17m | 36 - 62m | 14 - 19m | 14 - 25m | 21 - 38m | 17 - 34m

O.D. 4+

3.7V, 1-2A

1x / 2 x 16340 3.7V Lithium-Ion Rechargeable Batteries (based on model)

45 - 90 minutes

Constant Wave, On / O

Continuous

> 5,000 Hours

TECHNICAL SPECIFICATIONS LASER OPERATION

Battery Instructions

The Handheld Series is powered by either 1x or 2x 16340 3.7V

lithium-ion rechargeable batteries based on model. While you will

not nd this type of battery a the local market or electronics store,

it is readily available on the internet such as on Ebay and Amazon.

To get started, open the battery compartment by twisting the end

cap counter clockwise until it is completely removed. A label near

the opening of the battery compartment shows the proper polar-

ity of how the batteries are to be inserted. Place the batteries into

the laser now. When complete, screw the battery cap back onto

the laser by twisting clockwise.

Unlocking The Laser

The Handheld Series is equipped with a series of safety locks and

features that prevent the unauthorized use of this laser. Before

you can activate this laser, it must rst be unlocked.

Handheld Series Operations Manual | Page 2 Handheld Series Operations Manual | Page 3

STEP 1: Remote Interlock

The remote interlock is a pin type lock

that must be attached in order for the

laser turn on. Two types of interlock

keys are provided, the pin and loop.

When you receive your laser, the pin

key is already inserted into the remote

interlock. If this is removed, your laser

will not turn on.

The loop key is used if you require the addition of a third party

switch to activate the laser remotely. Simply cut the red wire and

attach the remote switch.

www.SKY-Lasers.com

LASER OPERATION

Laser Activation

If you’ve followed the battery and unlocking steps properly, your

laser is now ready to be turned on.

At this time, the laser is armed. For some models, the LED indicator

is green when armed.

To turn the laser on, press power button until you feel or hear a

faint click.

To turn the laser o, press the power button again and release

your nger.

For pulsed Handheld Series lasers using the Smart-Click system,

press and release the power button to activate constant wave

mode. Press and release the power button a second time to acti-

vate pulse mode at frequency of 2Hz. Press and release the power

button a third time to turn the laser o.

The LED power indicator is red/blue when the laser is powered on.

Handheld Series Operations Manual | Page 4

STEP 2: Key Switch

A key is required to unlock this laser.

When you receive your laser, the arrow

on the lock mechanism is pointed away

from the aperture, the hole where the

laser beam exits the laser.This is the

locked position.

To unlock, insert the set of keys that came with your laser by align-

ing the notch on the key with the groove on the lock mechanism.

Turn clockwise so the arrow points toward the aperture. This is the

active position.

Handheld Series Operations Manual | Page 5

STEP 3: Aperture Shutter

The last step in unlocking the Handheld

Series is opening the aperture shutter.

This is the lens cover that blocks the

laser beam from exiting the laser. Twist

the aperture shutter mechanism clock-

wise to open the aperture.

www.SKY-Lasers.com

Adjust Focus

The Handheld Series has unique focus adjusting abilities where you can widen the laser beam

into a laser ashlight. To adjust focus, simply twist the focus mechanism counter clockwise along

with the aperture shutter. Please refer to the Laser Diagram above for the location of the focus

mechanism.

You can gently twist the focus mechanism until you are no longer able to do so. Do not use force

to twist the focus mechanism beyond its intended length.

When you are no longer using the laser, return the focus mechanism back to its original position.

Did you know? Based on experience, the number one reason why your laser is not working is

because the batteries are inserted incorrectly. Open the battery compartment and double check

the polarity of the batteries with the instructions on the label.

Handheld Series Operations Manual | Page 6

LASER OPERATION

Lasers are powerful devices that emit a coherent beam of light with the potential to cause severe and permanent eye damage. Use common

sense and utmost caution when dealing with any laser. Even a low power laser can be potentially dangerous if handled improperly. Lasers are

not toys, below are some laser safety tips you should keep in mind when operating a laser:

1. Avoid direct or indirect contact with the eye or skin.

2. The Handheld Series emits a very powerful laser, this is not a laser pointer. Always point the laser away from you and anyone around

you. Always wear laser safety glasses when working with this laser.

3. Do not point the laser at reective surfaces such as a mirror or window. A reected laser beam carries enough power to be hazardous

to your eyes. Never view a laser using an optical instrument, such as binocular or a microscope.

4. Do not look at diused reections without proper laser safety glasses especially against a white or light colored background. Our

violet and blue lasers emit light near ultraviolet which can cause photochemical damage, reduce exposure if possible.

5. Do not allow children to operate a laser even if supervised.

6. Remove the batteries, lock the laser, and close the aperture shutter when you are no longer working with the laser.This will prevent

the laser from being accidentally activated.

7. Do not point a laser at moving motor vehicles or aircrafts. This will cause momentary blindness to the driver or pilot putting potential

hundreds of passengers at risk.

Handheld Series Operations Manual | Page 7

LASER SAFETY

you hereby agree be fully responsible for adhering by any ownership laws for this product in your jurisdiction and will not use this

direct, indirect, incidental, or consequential injuries or damages associated with the use of this product. By purchasing from www.SKY-Lasers.com,

SKY Lasers Ltd, operator www.SKY-Lasers.com, including any of its subsidiaries or aliates are in no event liable for any direct, indirect

www.SKY-Lasers.com

product in violation of any local, state, federal, or country regulations. You should also agree to the following:

I am an adult at least 18 years old.

I take full responsibility for my actions with this product.

I will use common sense when working with this product and follow safety protocols to the best of my knowledge.

I will not point this product at myself, people around me, nor animals.

I will not point this product at moving vehicles or aircrafts.

I understand that pointing a laser at an aircraft is illegal and a felony in the United States.

I will wear laser safety glasses when operating this laser.

Handheld Series Operations Manual | Page 9

LIMITATION OF LIABILITY

There is no routine maintenance required for this laser. While this is so, the lens of the laser may become

dirty resulting in a scattered laser beam and spot. To x this problem, you can perform the simple cleaning

procedure outlined below:

Lens Cleaning Procedure:

What you need: microber cloth for lens cleaning, q-tip, and lens cleaning solution (optional)

Step 1: Wash your hands thoroughly with soap and water making sure to dry them completely before

starting this procedure.

Step 2: Remove the batteries from the laser so it cannot be accidentally activated.

Step 3: Place the microber cloth over the aperture of the laser. Using the q-tip, slowly push the microber cloth through the aperture and

onto the lens of the laser diode approximately 5mm - 10mm inwards. When you have reached the lens, gently move the q-tip from

side to side and rotating in a circular motion.

Step 4: Remove the q-tip and microber cloth, insert batteries, and turn the laser on to see if the lens is clean. Repeat if necessary.

Tip: Put 1-2 drops of lens cleaning solution on the microber cloth to improve cleaning.

STORAGE

Store the laser in a dry location with temperatures between 0°C - 50°C (32°F - 122°F). To prevent dust from entering through the aperture, store

the laser within an enclosed box such as the one that came with the laser. Remove the batteries before storage.

Handheld Series Operations Manual | Page 8

MAINTANENCEMAINTANENCE

Dirty Laser Lens

This is only a portion of our warranty statement, you can send us an email to get more details.

All defective lasers will be replaced or repaired subject to the full discretion of www.SKY-Lasers.com.

www.SKY-Lasers.com

[email protected]To claim your warranty, send your inquiry to

SKY-Lasers.com warrants the Laser Pointer Series, Handheld Series, and Portable Series lasers for 6 months against defects in

workmanship and materials. The warranty does not cover normal wear and tear, or damage due to accident, abuse, misuse, modication, water,

pets, children, or‘acts of God.’

Disassembling your laser will void this warranty.

Our warranty only extends to the original owner, beginning on the day of purchase, and only to products purchased from our website or an

authorized reseller.

making sure to include the following information:

- Full Name

- Order ID

- Reason for Claim (in detail)

Handheld Series Operations Manual | Page10

WARRANTY

SKY TECHNOLOGIES

www.SKYtechlasers.com

25/F Workington Tower, 78 Bonham Strand, Sheung Wan, Hong Kong

Ce manuel convient aux modèles suivants

Table des matières

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur