•DynDns hostname:
Name you created on DNS server prov der.
Factory Default: Empty
•Username:
Access ng the DNS serv ce
Factory Default: Empty
•Password:
Accessung the DNS serv ce
Factory Default : Empty
•Last known IP:
D splays the last known IP address of the SPG
Communication Rules:
Commun cat on rules of the panel are to be set here.
SPG1000 can handle ndependent commun cat on paths.
Sequence of IP report ng:
2 t mes Ethernet Nr 1 Server address
2 t mes Ethernet Nr 2 server address
GPRS 1 server , GPRS 2 server , n case of
successfull commun cat on SPG 1084 w ll forward
all messages at GPRS channel for 3 m nutes. New
event w ll tr gger the repeat of th s whole sequence.
After unsuccessful commun cat on w ll result 3
m nutes of brake.
If there s only GPRS set as pr mary and only
commun cat on than n case of unsuccessfull event
commun cat on w ll be suspended for 15 m nutes.
The panel w ll send SMS conta n ng the Ademco
Contact ID nformat on from the nternal nputs f
ne ther Ethernet or GPRS commun cat on path s
unava lable.
•GPRS:
Sett ng the pr mary report ng route of the SPG s GPRS.
We suggest to use th s only f Ethernet s not ava lable.
More report ng routes you have the secure the operat on.
SPGs web programm ng page s ava lable through
Ethernet connecton only. If you use GPRS only
commun cat on only local programm ng s ava lable for
you.
•SMS only:
tIf you chose th s opt on the SPG 1084 w ll not send any
alarm reports to central stat on. Only user format SMS
messages . User format sms message content s to be set
at Alarm Funct on sect on of the programm ng.
Factory Default :Ethernet or Gprs
Users
Default programm ng mode (Am n strator) entry to the panel
s Adm n, Adm n (user, password) . Th s rule appl es only f
none of the user log n name and password s f lled out.
If you want to change on the default Adm n strator password
you must use the User nr 1 sect on for the new password.
You may not change Adm nstrator access level on User nr 1.
If you need User level access to be programmed you can do
that n User Nr 2,3 sect on.
•SMS address:
The telephone nr of the user where SMS could be sent-
Always use nternat on format ! e.g +36201111111
Factory Default: Empty
•Email address:
The e-ma l address of the user where e-ma l could be sent-
Factory Default : Empty
•Access level:
Access level of the user
Factory Default: None
•Login Name:
Log n name for the SPG 1084 web page.
Factory Default Empty
•Password:
Log n password of the SPG 1084 web page.
Factory Default Empty