SKIPIO SRT25-1 Manuel utilisateur

SKIPIO

Commercial Refrigerators & Freezers

User Manual

REACH-IN (UPRIGHT)

SRT, SFT & SRFT series

Chiller, Freezer & Dual Temperature

SKIPIO Warranty

WARRANTY CLAIMS –The user must report to its dealership, hence the dealer

can accumulate all pertinent information supporting the existence of the alleged

defect.

TWO YEARS PARTS & LABOUR WARRANTY

SKIPIO warrants to the original purchaser of every new SKIPIO refrigerated unit, the cabinet and

all partsthereof,to befreefrom defects in materialor workmanship, under normal use and service,

for a period of two (2) year from the date of original installation.

Any parts covered by this warranty that are examined and determined by SKIPIO to have been

defective within two (2) year of original installation shall be repaired or replaced as stated below.

SKIPIO shall be deemed to have full complied with its obligation under the foregoing warranties

by electing either one of the following procedures, at the sole discretion of SKIPIO:

(a) Furnishing a replacement part, freight collect, in even exchange for the returned part,

freight collect;

(b) Receiving the defective part, freight collect; repairing it, freight collect.

Warranty Terms and Conditions

1. The Warranty applies if and only if the Customer has used the Product in accordance with the

directions given by SKIPIO and strictly for the purpose to which the Product is intended.

2. The warranty Period begins on the original date of purchased and used within Australia.

3. The warranty is valid only for Products originally purchased and used within Australia.

4. The Customer must provide to SKIPIO the details of the Invoice (including serial number and

model code) when making a claim under the Warranty. Incorrect or incomplete details may

delay the processing of the claim. SKIPIO reserves the right to charge the Customer for all

reasonable expenses if the information provided by the Customer is incorrect of the Product

was in fact not originally purchased by the Customer directly from SKIPIO.

5. SKIPIO or its authorized agent has the right to assess the Product to determine the cause of

the defect. The Customer must make the product accessible for SKIPIO or its authorized

agent to assess and, if applicable, to repair including removing all personal items in the way.

If required, the Customer must at the Customer’s own cost unless otherwise prescribed by

law, return the Product to SKIPIO or its authorized agent. The Product must be returned with

all original components including but not limited to manual, keys and bracket.

6. The Warranty does not apply:

i) If notice of the defect has not been given by the Customer within the Warranty Period;

ii) If the defect arises from or in the reasonable opinion of SKIPIO or its authorized agent,

is likely to arise from one or more of the following:

iii) Connection to improper, inadequate or faulty electricity;

iv) Damage or failure as a consequence of not removing the packaging or transportation

material before use;

v) Natural wear and tear including but not limited to filters, fuses, lamps, voltage/power

surges, irregular electric power supply, natural events or disasters such as flooding

and earthquake, riots and sabotage;

vi) Improper use of cleaning agents, detergents, bleaches or another chemical additives

or agents of corrosive nature;

vii) Breakage, either intentionally or accidently, to any part of the Product;

viii)Any modification to, tampering with or repair or servicing of the Product except by

SKIPIO or its authorized agent or using parts not approved or authorized by SKIPIO.

ix) Improper, reckless, negligent or unsuited use of the Product including but not limited

to:

a) Use for an unspecified purpose;

b) Use in an environment where the ambient temperature and relative humidity are

outside the operating parameters specified for the Product;

c) Movement of the Product when in operation (for clarity, the Products are designed

for stationary operation only and must be connected directly to fixed wall supply);

d) Improper adjustment made such as to the analogue thermostat or digital controller

when the Product is in operation;

x) Corrosion or damage caused by foreign object externally or internally;

xi) Engine mechanical or technical failure (but not limited to compressor failure) due to

one or more of the following;

xii) Inadequate and/or irregular maintenance (of the type specified or recommended by its

manufacturer/SKIPIO) of components including but not limited to condensers and

filters;

xiii)Inadequate and/or irregular cleaning of the condenser (fortnightly or more frequently if

required);

xiv)Failure to provide adequate ventilation for the Product as specified or recommended

by its manufacturer/SKIPIO;

xv) Fail wear and tear.

7. Any repairmust be undertaken either by SKIPIO or an agent authorized by SKIPIO. Otherwise,

SKIPIO is entitled to avoid the Warranty.

8. TheWarranty Period is not extended or renewed by anysuccessful claim wherebythe Product

is replaced or Repaired

9. SKIPIO makes no representation as to the time frame within which any repair can or will be

carried out. In general, any repair will be restricted to normal business hours Monday to Friday

(9am –5pm) excluding public holidays and weekends, SKIPIO is not liable for the cost of the

authorized service agents other than the time specified in this point.

10. Warranty back to base apply to any items that can be carried and place into standard vehicle

(eg; SIM50A) is/are to be returned (or sent via pre-paid freight) to SKIPIO or its authorised

service agent. The customer shall agree to arrange pick up the goods after it is being serviced.

11. Where SKIPIO elects to replace rather than repair a Product but no identical replacement is

available, SKIPIO has the right to replace the Product with one of a similar standard and

design then available from its range. SKIPIO is not responsible for the re-packing and

installation of any replacement.

1 YEAR OPTIONAL WARRANTY PLAN

SKIPIO is providing customers the opportunity to extend their existing two-year warranty, by an

additional 1 year, totaling 3 years of warranty. Send this application form and payment to SKIPIO

Australia PTY LTD. Customers are expected 1-2 weeks for processing. If not having received the

Optional Warranty Plan certificate within this period, please contact us directly at SKIPIO. Please

refer to the application form for types of payment. One application form is to be completed per

product.

What is NOT covered by SKIPIO’s warranty?

SKIPIO’s sole obligation under this warranty is limited to either repair or replacement of parts,

subject to the additional limitations below. This warranty neither assumes nor authorizes any

person to assume obligations other than expressly covered by this warranty.

1. Warranty is NOT TRANSFERABLE. This warranty is not assignable and applies only in favour

of the original purchaser/user to whom delivered. ANY SUCH ASSIGNMENT ORTRANSFER

SHALL VOID THE WARRANTIES HEREIN MADE AND SHALL VOID ALL WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE.

2. NO CONSEQUENTIAL DAMAGES, SKIPIO IS NOT RESPONSIBLE FOR ECONOMIC

LOSS; PROFIT LOSS OR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES,

INCLUDING WITHOUT LIMITATION, LOSSES OR DAMAGES ARISING FROM FOOD OR

PRODUCT SPOILAGE CLAIMS WHETHER OR NOT ON ACCOUNT OF REFRIGERATION

FAILURE.

3. ALTERATION, NEGLECT, ABUSE, MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR

INSTALLATION, FIRE, FLOOD, ACTS OF GOD, SKIPIO is not responsible for the repair or

replacement of any parts that SKIPIO determines have been subjected after the date of

manufacture to alteration, neglect, abuse, misuse, accident, damage during transit or

installation, fire, flood, or an Act of God.

4. TRANSPORTANTION COSTS –SKIPIO will accept parts covered under this warranty freight

collect, provided that shipment has received prior approval. SKIPIO is not responsible for any

other transportation costs, but will ship freight collect parts either repaired or replaced under

this warranty.

5. Any services from an unauthorized person including owner –SKIPIO will not accept misuse

of display controller which is not mentioned on user manual.

6. Cabinets must be accessible and removable from the kitchen for service.

7. Consumable parts such as door gaskets, castors, legs, etc. are excluded from the warranty.

Contents

1. MODELS............................................................................................................................................. 7

2. INSTALLATION................................................................................................................................ 8

Warning & Safety Instructions................................................................................................. 8

Installing the Unit ........................................................................................................................... 9

1. Avoid heat source ....................................................................................................................... 9

2. Brake on castor............................................................................................................................ 9

3. Ventilation.................................................................................................................................... 10

Shelving.............................................................................................................................................. 10

Loading Product............................................................................................................................. 11

3. OPERATION ....................................................................................................................................12

Start Up .............................................................................................................................................. 12

Electronic Controller ...................................................................................................................12

How To Adjust Temperature ................................................................................................... 14

Power On/Off.................................................................................................................................... 15

Controller Alarms for users...................................................................................................... 15

4. SERVICING...................................................................................................................................... 16

Cleaning Cabinet ........................................................................................................................... 16

Cleaning Condenser.....................................................................................................................16

Access To Condenser .................................................................................................................16

Troubleshooting............................................................................................................................. 18

1.MODELS

UPRIGHT SOLID DOOR

Model

Type

Config.

Doors

Operating temperature range

SRT25-1

Refrigerator

Solid Door

+1°C to +8°C up to 38°C ambient

SRT25-2

Refrigerator

Solid Door

SRT45-2

Refrigerator

Solid Door

SRT45-4

Refrigerator

Solid Door

SRT65-3

Refrigerator

Solid Door

SRT65-6

Refrigerator

Solid Door

SFT25-1

Freezer

Solid Door

-21°C to -12°C up to 38°C ambient

SFT25-2

Freezer

Solid Door

SFT45-2

Freezer

Solid Door

SFT45-4

Freezer

Solid Door

SFT65-3

Freezer

Solid Door

SFT65-6

Freezer

Solid Door

UPRIGHT SOLID DOOR –Dual Temperature

Model

Type

Config.

Doors

Operating temperature range

SRFT25-2

Dual Temp

Solid Door

R-Compartment

+1°C to +8°C up to 38°C ambient

F-Compartment

-21°C to -12°C up to 38°C ambient

SRFT45-2

Dual Temp

Solid Door

SRFT45-4

Dual Temp

Solid Door

SRFT65-3

Dual Temp

Solid Door

SRFT65-6

Dual Temp

Solid Door

UPRIGHT GLASS DOOR

Model

Type

Config.

Doors

Operating temperature range

SRT25-1G

Refrigerator

Glass Door

+1°C to +8°C up to 38°C ambient

SRT45-2G

Refrigerator

Glass Door

SRT65-3G

Refrigerator

Glass Door

SRT25-2G

Refrigerator

Glass Door

SRT45-4G

Refrigerator

Glass Door

SRT65-6G

Refrigerator

Glass Door

SFT25-1G

Freezer

Glass Door

-21°C to -12°C up to 38°C ambient

SFT25-2G

Freezer

Glass Door

SFT45-2G

Freezer

Glass Door

SFT45-4G

Freezer

Glass Door

2. INSTALLATION

Warning & Safety Instructions

This appliance conforms to current safety requirements. However, inappropriate use can cause

injury and damage to property.

Do not cover the grilles or block the entry of airflow (condenser) or exhaust of airflow by

placing objects up against the refrigeration unit;

Ensure adequate ventilation provided for the appliance as this is essential to

performance, at least 300 mm from the ceiling;

Ensure the safe power supply and current draw for the appliance as overload of the

power supply can damage the entire unit;

Ensure to install the appliance indoor;

Avoid damp and dusty environment which may cause electric shock;

Use casters or legs for the unit;

Must disconnect the unit from the power supply prior to cleaning or maintenance;

Ensure not to put hot food in the unit;

Preferred to use the leakage protector to prevent the short circuit;

Ensure not to store volatiles and combustibles inside cabinet.

Installing the Unit

1. Avoid heat source

Avoid direct sunlight, uneven surface, hot environment beyond recommended ambient

temperature of the cabinet.

The unit must NOT be situated where it is affected by hot air from adjacent equipment as this will

compromise the airflow and performance of the cabinet.

2. Brake on castor

Rear castors come with brakes for SKIPIO upright cabinets to secure the position.

The brake acts like see-saw, pressing down on the left side of brake or rotating (anti-clockwise)

locks the castor. Likewise, the brake can be unlocked by pressing down on the right side of brake

or rotating (clockwise).

3. Ventilation

Providing an environment with good ventilation prolongs the life of compressor and performance.

Air flows into condenser (front) and theoutflow of the usedair is exhausted via outlets. For efficient

operation of the cabinet, providing adequate ventilation and ambient temperature (below 38°) is

essential.

Prior to installation of the unit, a gap of at least 300 mm must be left from the ceiling as outlets of

the used air are located at the top of the unit.

Shelving

Inside the cabinet, there is a shelf package. Remove all packaging material. Each shelf is paired

with 4 support brackets (shelf clips).

The shelves can be positioned at different heights for customer’s preference. Always ensure that

the support brackets are securely engaged in each of the shelf support rail.

It is recommended that the cabinet operates for 30 minutes prior to loading product.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SKIPIO Congélateur

SKIPIO

SKIPIO SGF-6 Manuel utilisateur

Manuels Congélateur populaires d'autres marques

Siemens

Siemens GU..D SERIES Manuel utilisateur

Omcan

Omcan FR-CN-0155 Manuel utilisateur

Beko

Beko FNE290E24W Manuel utilisateur

Electrolux

Electrolux ARCTIS G 8 60 50-6I Manuel utilisateur

Electrolux

Electrolux EUF2042AOX Manuel utilisateur

Dometic

Dometic CoolFreeze CFX95DZ Manuel utilisateur

Electrolux

Electrolux EUF7000W1 Manuel utilisateur

Polar Electro

Polar Electro CT330 Manuel utilisateur

MPM

MPM MPM-145-SK Series Manuel utilisateur

SAF

SAF PRESTOTIG 200AC/DC Guide rapide

Zanussi

Zanussi ZFT11407WA Manuel utilisateur

AEG

AEG A63190GT Manuel utilisateur

AEG

AEG A81000TNW0 Manuel utilisateur

Matsui

Matsui MUC50S15E Manuel utilisateur

NEFF

NEFF G4344X8 Manuel utilisateur

Frigidaire

Frigidaire FV 1246 H Manuel utilisateur

Frigidaire

Frigidaire FFC13K1AW Manuel utilisateur

Electrolux

Electrolux EU 2400C Manuel utilisateur