Use
1. Remove the diffuser cover
2. Connect the power adapter connector on the bottom of
the base
3. Make sure the power cord is unplugged
4. Pour water into the container up to the maximum level
line using a measuring cup
5. You can drip a few drops of essential oil into the water,
about 2-3 drops per 100 ml
6. Replace the diffuser cover
7. Plug in
8. Press the ¨MIST¨ button to select the diffuser operation time
(1H, 2H, 3H, ON continuous operation).
9. Press the HIGH / LOW button to adjust the steamintensity.
10. To turn off the diffuser, press and hold the “MIST” button
11. Use the ¨LIGHT¨ button to select the lighting color
12. Start the diffuser (steam production may take approx. 3-
10 minutes during the first start-up)
Note
•During operation, the amount and intensity of the
mist discharged can be changed for some types of
diffusers
•If there is not enough water in the tank, the
appliance switches off automatically
•After use, disconnect the appliance from the power
supply and pour out the remaining water from the tank
and dry it