Operation
1. Place the filter holder onto the drive unit.
2. Fit the filter into its holder, pushing it firmly down until it is heard locking into place. It is important that the filter is securely
attached and not at an angle.
3. Slide the pulp container on the left side on the unit under the rim of the filter holder, tilting the container slightly
4. Place the transparent lid onto the filter holder. The left side of the lid must engage in the pulp container. Secure the lid with the
locking clip, which will activate the safety switch. Ensure that the locking clip engages firmly on both sides into the locking
recesses on the lid.
5. Slide the splash guard onto the juice outlet and place the juice container below the outlet.
6. Insert the plug into the wall outlet and put the switch to the required setting.
7. Feed the clean, pre-cut fruit or vegetable pieces down the feeder tube while the unit is running. Use the Pusher to push the
pieces down lightly, observing the arrow mark and the guide slot on the Pusher.
8. Caution: Excessive pressure may result in damage to motor or filter.
9. When processing large quantities of fruit or vegetables, the pulp container and juice container must be emptied from time to
time as necessary.
10. After use, switch the Sirena Supreme Juicer off and remove the plug from the wall socket.
Juice Container
The juice container incorporates a removable foam screen. If the juice is poured out carefully, the foam caused during juice
extraction will remain inside the container.
Cleaning and Care
⚫DO NOT PUT DRIVE UNIT IN DISHWASHER! ALL OTHER PARTS ARE DISHWASHER SAFE.
⚫Always remove the plug from the wall socket and allow the Sirena Supreme Juicer to cool down before cleaning.
⚫Please note: the filter has small, sharp points. There is a risk of injury.
⚫Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning.
⚫To avoid the risk of electric shock, do not clean the drive unit with water and do not immerse it in water.
⚫The drive unit may be wiped with a slightly damp, lint-free cloth.
⚫The pulp container, filter holder, splash guard, lid, Pusher and juice container may all be cleaned using hot water and a mild
detergent.
⚫The filter should also be cleaned each time after use, using a soft, commercially available nylon brush. Do not clean the filter
with any hard objects, as that may render it unusable.
Disposal
Devices marked with this symbol must be disposed of separately from your household waste, as they contain valuable materials
which can be recycled. Proper disposal protects the environment and human health. Your local authority or retailer can
provide information on the matter.
