Sintrones VBOX-3200 Manuel utilisateur

VBOX-3200

In-Vehicle Computing

User's Manual

Version 1.2

Document Name VBOX-3200 User Manual Document No. UM2011320012

Version 1.2 Date Sept. 27, 2012

Reversion History :

Reversion

Date Notes Author(s)

From

1.0 Jun 08, 2011 Initial document issued Stanley Chou

1.1 Jun 25, 2012 Add CAN Pin assignment Stanley Chou

1.1 1.2 Sept 27, 2012 M12 Connecting to the Network Stanley Chou

SINTRONES® Technology Corp.

User Manual

No part of this publication may be reproduced, transcribed, stored in a retrieval system,

translated into any language, or transmitted in any form or by any means such as

electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise,

without prior written permission from SINTRONES® Technology Corp.

Other brands and product names used herein are for identification purposes only and

may be trademarks of their respective owners.

Disclaimer

SINTRONES® Technology Corp. shall not be liable for any incidental or consequential

damages resulting from the performance or use of this product.

SINTRONES® Technology Corp. makes no representation or warranty regarding the

content of this manual. Information in this manual had been carefully checked for

accuracy; however, no guarantee is given as to the correctness of the contents. For

continuing product improvement, SINTRONES® Technology Corp. reserves the right to

revise the manual or make changes to the specifications of this product at any time

without notice and obligation to any person or entity regarding such change. The

information contained in this manual is provided for general use by customers.

This device complies to Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1. This device may not cause harmful interference.

2. This device must withstand any background interference including those that may

cause undesired operation.

User’s Manual Page i

Safety Information

Read the following precautions before setting up a SINTRONES Product.

Electrical safety

To prevent electrical shock hazard, disconnect the power cable from the electrical

outlet before relocating the system.

When adding or removing devices to or from the system, ensure that the power

cables for the devices are unplugged before the signal cables are connected. If

possible, disconnect all power cables from the existing system before you add a

device.

Before connecting or removing signal cables from the motherboard, ensure that all

power cables are unplugged.

Seek professional assistance before using an adapter or extension cord. These

devices could interrupt the grounding circuit.

Make sure that your power supply is set to the correct voltage in your area. If you

are not sure about the voltage of the electrical outlet you are using, contact your

local power company.

If the power supply is broken, do not try to fix it by yourself. Contact a qualified

service technician or your retailer.

Operation safety

Before installing the motherboard and adding devices on it, carefully read all the

manuals that came with the package.

Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

Avoid dust, humidity, and temperature extremes. Do not place the product in any

area where it may become wet.

Place the product on a stable surface.

If you encounter technical problems with the product, contact a qualified service

technician or your retailer.

User’s Manual Page ii

CAUTION

Incorrectly replacing the battery may damage this computer. Replace only with the

same or its equivalent as recommended by SINTRONES® Technology Corp. Dispose used

battery according to the manufacturer's instructions.

Technical Support

Please do not hesitate to call or e-mail our customer service when you still cannot fix

the problems.

Tel : +886-2-82280101

Fax : +886-2-82280100

E-mail : sales@sintrones.com

Website : www.sintrones.com

User’s Manual Page iii

TABLE OF CONTENTS

Page #

1.0 Introduction ............................................................................................................................... 1-1

1.1 Model Specification.............................................................................................................. 1-1

1.2 VBOX-3200 Illustration (MB, System).............................................................................. 1-3

2.0 Internal Connector Specification ............................................................................................ 2-1

2.1 SATA Power Wafer Connector ........................................................................................... 2-1

2.2 Reserved JST Connector...................................................................................................... 2-1

2.3COM Port JST Connector (COM2)....................................................................................... 2-2

2.4COM Port JST Connector (COM3)....................................................................................... 2-2

2.5COM Port JST Connector (COM4)....................................................................................... 2-3

2.6DVI-D /LVDS connector: (DP0) .......................................................................................... 2-4

2.7VGA JST Connector ............................................................................................................... 2-5

2.8SATA Connector (SATA1).................................................................................................... 2-5

2.9SATA Connector (SATA0).................................................................................................... 2-6

2.10 USB JST Connector (USB4/5) ............................................................................................. 2-6

2.11 USB JST Connector (USB 6/7)............................................................................................. 2-7

2.12 UPS JST Connector................................................................................................................ 2-7

2.13 Download Port JST Connector ........................................................................................... 2-8

2.14 BATTERY Connector (Recommend to use CR2032 Battery) ....................................... 2-8

2.15 RTC RESET Connector.......................................................................................................... 2-9

2.16 RS232 RI# Pin Power Select Connector (COM2) ............................................................ 2-9

2.17 RS232 RI# Pin Power Select Connector (COM1) .......................................................... 2-10

2.18 MINI CARD Connector (Mini Card0) ............................................................................... 2-10

2.19 Mini CARD Connector (Mini Card1)................................................................................ 2-12

2.20 MINI CARD Connector (Mini Card2) ............................................................................... 2-13

3.0 External Connector Specification............................................................................................ 3-1

3.1 Power Input Connector....................................................................................................... 3-1

3.2Power Button Connector .................................................................................................... 3-2

3.3DIO Connector....................................................................................................................... 3-2

3.4RJ45 Connector (LAN0) ....................................................................................................... 3-3

3.5RJ45 Connector (LAN1) ....................................................................................................... 3-4

User’s Manual Page iv

3.6M12 Connecting to the Network........................................................................................ 3-4

3.7COM Port Connector (COM1).............................................................................................. 3-5

3.8DVI-I Connector (DP1+VGA)............................................................................................... 3-6

3.9USB Connector (USB 0/1) ................................................................................................... 3-7

3.10 USB Connector (USB2/3) .................................................................................................... 3-8

3.11 Audio Connector................................................................................................................... 3-8

3.12 CAN Pin Assignment............................................................................................................. 3-9

3.13 UPS/3.5G LED ........................................................................................................................ 3-9

3.14 HDD/ACC LED...................................................................................................................... 3-10

3.15 CAN BUS Pin Assignment .................................................................................................. 3-10

4.0 System Installation ................................................................................................................... 4-1

4.1System Introduction ............................................................................................................ 4-1

4.2 Opening Chassis.................................................................................................................... 4-2

4.3Installing Memory ................................................................................................................ 4-6

4.4Installing MINI PCIe Expansion Card (PCIe 1) ................................................................ 4-9

4.5Installing MINI PCIe Expansion Card (PCIe 2, Wifi Module) ...................................... 4-11

4.6 Installing MINI PCIe Expansion Card (PCIe 3, 3G Module only) ................................ 4-13

4.7Installing Internal Antenna Cable................................................................................... 4-15

4.8Installing SIM Card............................................................................................................. 4-19

4.9Installing HDD..................................................................................................................... 4-21

5.0 System Resource ........................................................................................................................ 5-1

5.1Ignition Power Management Quick Guide....................................................................... 5-1

5.2 GPIO & Delay Time Setting ................................................................................................. 5-3

5.2.1 GPIO, Delay Time and Ignition Control Register............................................................................ 5-3

5.2.2 GPIO Programming Procedure........................................................................................................ 5-4

5.2.3 WDT Setting ...................................................................................................................................... 5-5

5.3Gobi2000 WWAN Module Application Note.................................................................... 5-8

5.4Gobi2000 GPS Module Application Note........................................................................ 5-12

6.0 BIOS ............................................................................................................................................. 6-1

6.1 Super IO Configuration........................................................................................................ 6-1

7.0 Packing List ................................................................................................................................ 7-1

7.1 Packing List ........................................................................................................................... 7-1

User’s Manual Page v

1.0 Introduction

1.0

INTRODUCTION

User’s Manual

1.0 Introduction

1.0 INTRODUCTION

1.1 Model Specification

System

CPU

AMD G-T56N Dual Core 1.6GHz

AMD G-T40N Dual Core 1.0GHz

AMD G-T44R Single Core 1.2GHz (Optional)

Memory 2 x DDR3 1333MHz SO-DIMM up to 8GB

Chipset AMD A55E Controller Hub

Graphics AMD G-T56N Radeon HD 6310 / G-T44R Radeon HD 6250

LAN Chipset

2 x Realtek RTL8111E Gb/s Ethernet onboard

Support PXE

Audio Realtek ALC662 HD Codec onboard

Watchdog 1 ~ 255 Level Reset

Power Requirement

Power Input 9V-32V DC Power input

Power Protection Automatics Recovery Short Circuit Protection

Power Management Vehicle Power Ignition for Variety Vehicle

Power Off Control Power off Delay Time Setting by Software

Battery Internal Battery Kit for 10 Mins Operating (Optional)

User’s Manual Page 1-1

1.0 Introduction

Storage

Type 2 x 2.5” drive bay for SATA Type Hard Disk Drive / SSD

Graphics

AMD G-T56N Radeon HD 6310 / G-T44R Radeon HD 6250

1 X DVI-I connector and VGA on rear I/O

Resolution Up to 2045 x 1560 @85H

Qualification

Certifications CE, FCC, Class A

I/O

Serial Port

3 x RS-232 (COM1,2 with RS-422/485, RS-485 Support Auto Direction

Control)

USB Port 4 x USB 2.0 Ports on Front I/O

LAN 2 x RJ45 Ports for GbE

Video Port 1 x DVI-I and 1 x VGA Output

DIO Port 4 in and 2 out with Relay 12V / 80mA

Audio 1 x Line-out (Default is 1 on Rear I/O)

SIM Card Socket 1 x SIM Card socket supported onboard with eject

Environment

Operating Temp. -40 ~ 70ºC (SSD), ambient w/ air

Storage Temp. -40 ~ 80ºC

Relative Humidity 10 ~ 95% (non-condensing)

Vibration (random) 2.5g@5~500 Hz with SSD

Vibration Operating MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle-Highway

Truck Storage MIL-STD-810F, Method 514.5, Category 24, Integrity Test

Shock

Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and

semi-trailers=40G(11ms), Non-Operating 80G with SSD

Crash Hazard MIL-STD-810F, Method 516.5, Procedure V, Ground equipment=100

Mechanical

Construction Aluminum alloy

Mounting Supports both of wall-mount/VESA-mount

Weight 1.5 kg (bard-bone)

Dimensions 250 x 150 x 55 mm

User’s Manual Page 1-2

1.0 Introduction

1.2 VBOX-3200 Illustration (MB, System)

Main Board

User’s Manual Page 1-3

Autres manuels pour VBOX-3200

Table des matières

Autres manuels Sintrones Ordinateur de bureau

Sintrones

Sintrones SBOX-2110 Manuel utilisateur

Sintrones

Sintrones VBOX-3620-M12X Manuel utilisateur

Sintrones

Sintrones ABOX-5000PG1 Manuel utilisateur

Sintrones

Sintrones SBOX-2150 Manuel utilisateur

Sintrones

Sintrones VBOX-3000 Manuel utilisateur

Sintrones

Sintrones SBOX-2600 Manuel utilisateur

Sintrones

Sintrones VBOX-3611-4L Manuel utilisateur

Sintrones

Sintrones VMT-825 Manuel utilisateur

Sintrones

Sintrones DSS-1300 Manuel utilisateur

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur