Sinoboom 1414E Plus Manuel utilisateur

1414E Plus/4655E Plus

Operation

Manual

Part No.501063100002

Rev: A

Apr 2021

GTJZ

0608E (2132E)

GTJZ

0808E (2732E)

GTJZ

0808E (2732E)

GTJZ

0808E (2732E)

长沙市宁乡高新技术产业园区金洲大道东

128 号

0731-87116111 hr@sinoboom . c om . cn ww w .sinoboom . c om . cn

Al w ays F or B e t t er A cc ess Solution s

我们一直在追求新的高度

尺寸：

210×285mm

20mm

产品说明书

PRODU C T MAN U AL

Operating, servicing and maintaining this vehicle or

equipment can expose you to chemicals including engine

exhaust, carbon monoxide, phthalates, and lead, which

are known to the State of California to cause cancer and

birth defects or other reproductive harm. To minimize

exposure, avoid breathing exhaust, do not idle the engine

except as necessary, service your vehicle or equipment in

a well-ventilated area and wear gloves or wash your

hands frequently when servicing. For more information

go to: www.P65warnings.ca.gov.

Please contact us:

Website : www.sinoboom.com

E-mail : [email protected]

Sales Tel : 0086-0731-87116222

Service Tel : 0086-0731-87116333

Address : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha,

Hunan, China

Zip Code : 410600

The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.

Manual revision history：

REV DATE DESCRIPTION REMARK

AApr. 2021 Original issue of the manual

APPLICATION

Use the following table to identify the specific serial number for

models included in this manual. Check the model of your machine before

consulting the manual, and then use the correct manual according to the

serial number of the model. See the nameplate on your machine to

identify the model and serial number.(See Decals/Nameplate Inspection

for details.)

Model

Trade identification

Serial No.

Metric Imperial

1414E Plus 1414E Plus 4655E Plus From 0106300100 to present

NOTE:

•Product model is applied in product nameplate for distinction of products of different main

parameters.

•Product trade identification is applied in marketing and machine decals for distinction of products of

different main parameters, and can be classified as metric type and imperial type: The metric type of

trade identification is applicable to machines for countries/regions using metric system or as

specially required by customers; The imperial type of trade identification is applicable to the

machines for countries/regions using imperial system or as specially required by customers.

This Page Intentionally Left Blank

STATEMENTS

Hunan Sinoboom Intelligent Equipment Co., Ltd. (Hereinafter referred to as Sinoboom) will upload the

latest product manual information to the website www. sinoboom. com as soon as possible. However,

due to continuous product improvement, the information in this manual is subject to change without prior

notice.

This manual covers the basic parts information of one or more products. Therefore, please use this

manual according to your needs. If you find problems in the manual or have suggestions for improve-

ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as

possible.

Feel free to consult and download the Operation Manual,Maintenance Manual and Parts Manual of the

products you need online at www.sinoboom.com.

Hunan Sinoboom Intelligent Equipment Co., Ltd. retains the right of final interpretation of the manual.

This Page Intentionally Left Blank

1414E Plus Operation Manual i© Apr 2021

TABLE OF CONTENTS

Introduction ............................. iii

1 Machine Specifications ........ 1-1

2 Machine Components .......... 2-1

3 Safety............................... 3-1

Safety Definitions . . . . . . . . .. . . . . . . . . . . . 3-1

Reporting Accidents. . . . . . . . . . . . . . . . . . . 3-1

Electrocution Hazards. . . . . . . . . . . . . . . . . 3-1

Tipping Hazards and Rated Load . . . . . 3-2

Work Environment Hazards . . . . . .. . . . . 3-4

Unsafe Operation Hazards. . . . . . . . . . . . 3-5

FallHazards...........................3-6

Collision Hazards . . . . . . . . .. . . . . . . . . . . . 3-7

Crush Hazards . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Explosion and Fire Hazards. . . . . . . . . . . 3-8

Damaged Machine Hazards . . . . . . . . . . 3-8

Bodily Injury Hazards . . . . . . . . . . . . . . . . . 3-8

Hydraulic Systems Hazard . . . . . . . . . . . . 3-9

Battery Hazards . . . . . . . . . . . . . . . . . .. . . . . 3-9

Charging the Battery. . . . . . . . . . . . . . . . 3-9

Handling the Battery . . . . . . . . . . . . . . .3-10

Welding and Polishing Requirements3-10

After Using the Machine. . . . . . . . . . . . . .3-10

4 Jobsite Inspection............... 4-1

5 Pre-operation Inspection ...... 5-1

Tips for Conducting a Pre-operation

Inspection.............................5-1

Conducting a Pre-operation

Inspection.............................5-1

Inspecting Parts . . . . . . . . . . . . . . . . . .. . . . . 5-2

Inspecting Entire Machine . . . . . . . . . . . . 5-2

Inspect Hydraulic Oil Level. . . . . . . . . . . . 5-2

Inspecting the Battery . . . . . . . . . . . . . . . . . 5-3

Verifying the Indoor/Outdoor Mode . . . 5-3

6 Pre-operation Function Test .. 6-1

Preparing for a Pre-operation Func-

tionTest...............................6-1

Testing the Ground Controller . . . . . . . . . 6-1

Testing the Platform Controller

（SINOBOOM）......................6-3

Testing the Platform Controller

（DTC）..............................6-5

Testing the Platform Controller

（CANPLUS）........................6-7

Testing the Drive Speed. . . . . . . . . . . . . . . 6-9

Testing the Emergency Lowering

Function..............................6-10

Testing the Tilt Protection Function . . 6-11

Testing the Pothole Guard . . . . . . . . . . .6-12

Testing the Weighing System . . . .. . . .6-12

7 Operating the machine ......... 7-1

Emergency Stop . . . . . . . . . . . . . . . . . . . . . . 7-1

Emergency Towing/Dragging . . . . . . . . . 7-2

Operation from Ground . . . . . . . . . . . . . . . 7-3

Operation from Platform . . . . . . . . . . . . . . 7-3

Operating with the Platform Control-

ler on the Ground . . . . . . . . . . . . . . . . . . . . . 7-4

Extending/Retracting the Platform . . . . 7-4

Folding/Unfolding the Rails . . . . . . . . . . . 7-5

Driving on a Slope. . . . . . . . . . . . . . . . . . . . . 7-7

Charging the Battery . . . . . . . . . . . . . . . . . . 7-8

Changing Charger Battery Curve . . . . . 7-9

Setting the Indoor/Outdoor Mode . . . . . 7-9

8 Transporting and Lifting the

Machine........................... 8-1

Lifting the Machine with a Forklift . . . . . 8-1

Lifting the Machine with a Crane . . . . . . 8-2

Transporting the Machine . . . . . . . . . . . . . 8-3

9 Maintenance ...................... 9-1

Conducting a Pre-delivery Inspection . 9-1

Following a Maintenance Schedule . . . 9-2

Completing a Repair & Inspection

Report.................................9-2

10 Decals/Nameplates

Inspection ....................... 10-1

1414E Plus Decals/Nameplates

（GB）............................10-2

1414E Plus Decals/Nameplates

（CE-Metric）.....................10-5

1414E Plus Decals/Nameplates

（CE-Imperial）...................10-8

1414E Plus Decals/Nameplates

（ANSI）.........................10-11

1414E Plus Decals/Nameplates

(CSA)............................ 10-14

1414E Plus Decals/Nameplates

（AS）........................... 10-17

1414E Plus Decals/Nameplates

（KCS）......................... 10-20

Appendix 1: Symbols and

Description.......................A-1

Appendix 2: Prepare the Work

Record Before Delivery ....... A-5

Appendix 3: Repair & Inspection

Report .............................A-7

Autres manuels pour 1414E Plus

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Sinoboom Système de levage

Sinoboom

Sinoboom TB28J Plus Manuel utilisateur

Sinoboom

Sinoboom GTJZ0608SE Manuel utilisateur

Sinoboom

Sinoboom GTJZ1012E Manuel utilisateur

Sinoboom

Sinoboom 1414E Plus Manuel utilisateur

Sinoboom

Sinoboom GTTZ09EJ Manuel utilisateur

Sinoboom

Sinoboom GTTZ10EJ Manuel utilisateur

Sinoboom

Sinoboom 1018RD Manuel utilisateur

Sinoboom

Sinoboom GTZZ15J Manuel utilisateur

Sinoboom

Sinoboom 1018RE Manuel utilisateur

Sinoboom

Sinoboom TB24E Plus Manuel utilisateur

Sinoboom

Sinoboom GTZZ25J Manuel utilisateur

Sinoboom

Sinoboom GTJZ0407SE Manuel utilisateur

Sinoboom

Sinoboom GTJZ0608ME Manuel utilisateur

Sinoboom

Sinoboom TB26EJ Plus Manuel utilisateur

Sinoboom

Sinoboom GTJZ0608E Manuel utilisateur

Sinoboom

Sinoboom GTJZ1932ME Manuel utilisateur

Sinoboom

Sinoboom GTJZ0408SE Manuel utilisateur

Sinoboom

Sinoboom GTJZ0407SE Manuel utilisateur

Sinoboom

Sinoboom GTBZ26 Manuel utilisateur

Sinoboom

Sinoboom TB24E Plus Manuel utilisateur

Sinoboom

Sinoboom TB18E Plus Manuel utilisateur

Sinoboom

Sinoboom TB18 Plus Manuel utilisateur

Sinoboom

Sinoboom 1323RD Manuel utilisateur

Sinoboom

Sinoboom AB22EJ Plus Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur