Sinclair SWC-86A Manuel d'utilisation
SWC-86A
USER AND INSTALLATION MANUAL
IJ&%+)&##)
AIR CONDITIONING
This manual gives detailed description of the precautions
that should be brought to your attention during operation.
In order to ensure correct service of the wired controller
please read this manual carefully before using the unit.
For convenience of future reference, keep this manual after
reading it.
CONTENTS
Quick Operation Process
Features
Main Parameters
Overview
Basic Setting
Fan Speed Setting
Timer Setting
Child Lock Setting
Indoor Temperature Display
Project Commissioning
Installation
2
101
01
302
06
07
07
08
13
8
7
9
10
11
4
5
6
03
04
05
01
1 Quick Operation Process
Timer function:
ECO function:
1.1 Auxiliary function operation
Mode Fan speedOn/Off switch
Timing
Adjust temperature
Adjust time
Enable the ECO mode
Press to confirm timing
Press and hold for 3s to cancel
the timing
2 Features
Modbus Child lock
Modbus
Press and hold for 2s
Electric auxiliary
heating mode Timer
function
ECO
setting
02
3 Main Parameters
Model
Temperature limit
Humidity
Rated Current
Rated voltage 220-240V~
,
50/60Hz
Networked: SWC-86A
-15°C to 43°C
≤RH90 %
CAUTION
● Entrust a qualified local technician to perform installation.
The user must not install the unit. The unit must be installed
by a professional technician.
● Before cleaning or maintenance, ensure the power supply
is cut off. Do not use water for washing to prevent electric
shocks.
● Do not operate with wet hands to avoid electric shocks.
● Do not use pesticides, disinfectants, or flammable directly
on the wired controller as they may damage the device or
cause fires.
● Do not try to remove the display panel with your bare hands
to avoid electric shocks.
Inductive load:
max. 0.9A /output, total: max. 1A, PF=0.93
Substantially resistive load:
max. 1A /output, total: max. 1A
Degree of pollution 2
Action Type 1B.U
4 Overview
On/OffFan speed
/ECO
Adjustment
button
TimingMode
ECO
display
Timer
display
Fan speed display
Operating
indicator
03
Operating
mode display
1 On/Off
2 Mode
selection
The icon is displayed when the air conditioner is off.
Scenario Mode switch
Two-pipe cooling Cool
Cool
Cool
Cool
Cool
Cool
Fan
Fan
Fan
Fan
Fan
Fan
Two-pipe cooling
and heating
Heat
Heat
Heat
Two-pipe heating
+ Auxiliary electric heater
Four-pipe
Press to change the operating mode according to the order
shown below:
Two-pipe cooling and heating scenario is set before delivery
from factory by default. The scenario can be changed based
on the parameter settings according to the actual need.
Press . The operating status LED turns on and the air
conditioner starts operating;
Press again. The operating status LED turns off and the air
conditioner stops operating.
5 Basic Setting
04
Two-pipe cooling +
Auxiliary electric heater
Two-pipe cooling and
heating + Auxiliary
electric heater
Auxiliary
electric heater
Auxiliary
electric heater
Heat + Auxiliary
electric heater
Auxiliary
electric heater
Heat + Auxiliary
electric heater
CAUTION
● After the fan speed is set, it takes time for the air
conditioner to respond. It is normal if the air conditioner
does not respond to the setting immediately.
1 Adjust fan
speed
Press to adjust the fan speed, which can be set to High,
Normal, Low and Auto.
3 Temperature
setting
Press and hold bottom for 2s to enable ECO mode.
Cooling ECO: 26℃, low fan speed;
Fan ECO: low fan speed;
Heating ECO: 18℃, low fan speed;
Auxiliary electric heater ECO: 18℃, low fan speed;
Heating + Auxiliary electric heater ECO: 18℃, low fan speed
4 ECO setting
Except in the Fan mode, press or to adjust the set
temperature indoors. Press and hold the button to
increase or decrease the set temperature continuously.
6 Fan Speed Setting
05
CAUTION
● Timed Off can be set when the air conditioner is on and
Timed On can be set when the air conditioner is off.
7 Timer Setting
1 Timed On setting:
2 Timed Off setting:
Press and hold Timer for 3s or set the timer to 0.0 to cancel timing.
3 Cancel timing:
Press and hold to cancel Press and hold to cancel
Press and hold to cancelPress and hold to cancel
Press or switch
off the screen to
confirm the timing
Press or switch
off the screen to
confirm the timing
06
● The indoor temperature is displayed when the screen is off.
9 Indoor Temperature Display
1 Enable child lock:
2 Disable child lock
Press and hold the two
buttons for 1.5s Enable child lock
Press and hold the two
buttons for 1.5s Disable child lock
The wired controller doesn't
respond when buttons are
pressed and flashes.
8 Child Lock Setting
07
Table des matières
Autres manuels Sinclair Contrôleurs
Sinclair
Sinclair SCC-36 Manuel utilisateur
Sinclair
Sinclair SDV 6 SWC-61 Mode d’emploi
Sinclair
Sinclair SWC-86E Mode d'emploi
Sinclair
Sinclair SCC-16 Mode d'emploi
Sinclair
Sinclair KJR-18B Manuel d'utilisation
Sinclair
Sinclair KJRP-75A Manuel d'utilisation
Sinclair
Sinclair SWC-02 Manuel utilisateur
Sinclair
Sinclair XK117 Manuel utilisateur
Sinclair
Sinclair KJR-29B Manuel utilisateur
Sinclair
Sinclair KJR-120G Manuel utilisateur
Sinclair
Sinclair SWC-04 Manuel utilisateur
Sinclair
Sinclair SWC-03 Manuel utilisateur
Sinclair
Sinclair KJR- 90D Manuel utilisateur
Sinclair
Sinclair XK19 Manuel utilisateur
Sinclair
Sinclair XK64 Manuel utilisateur
Sinclair
Sinclair XK60 Manuel utilisateur
Sinclair
Sinclair NIM09 Manuel utilisateur
Sinclair
Sinclair ZJ4011A Manuel utilisateur
Sinclair
Sinclair SDV KJR-12B Manuel utilisateur
Sinclair
Sinclair SWC-05W Manuel utilisateur
