Simrad Pump-1 Manuel utilisateur

21 4

MOUNTING: NAC-1

MOUNTING: Precision-9 7

Without bracket

With bracket

Outboard and

DrivePilot

Installation Guide

ENGLISH

NAC-1

Operating temperature -25 °C to +55 °C (13 °F to 131 °F)

Protection Splashproof, IPx5

Weight 0.6 kg (1.3 lbs)

Power supply/Load 9-16 V DC/140 mA + drive unit load

Performance Drive: 8 A cont., 16 A for 1 s

Pump-1

Operating temperature -15 °C to +75 °C (5 °F to 167 °F)

Protection Splashproof, IPx5

Weight 2.2 kg (4.9 lbs)

Hydraulic thread size 1/4 NPT

Load 5 A at 8 bar (116 psi), 7 A at 24 bar (350 psi)

Performance 0.8 l/min at 24 bar (350 psi)

Point-1AP

Operating temperature -25 °C to +60 °C (13 °F to 140 °F)

Protection Watertight, IPx7

Weight 0.14 kg (0.31 lbs)

Power supply/Load 9-16 V DC/<100 mA @ 12 V DC

Performance Heading: +/- 3°, Horiz. accuracy: 3 m (9.8 ft)

Compass safe distance 1 m (3.3 ft)

Auto/Stby Button

Operating temperature -25 °C to +55 °C (13 °F to 131 °F)

Protection Splashproof, IPx5

Weight 0.04 kg (0.09 lbs) (including cable)

Precision-9

Operating temperature -25 to + 65 °C (-13 to + 149 °F)

Protection IPx7

Weight 165 g (5.8 oz) + 130 g (4.6 oz) (Bracket)

Power supply/Load 8-16 V/1.4 W

Accuracy ± 2 degrees after calibration

Compass safe distance 0.5 m (1.7 ft)

PLANNING: Pump-1, Mounting location

CORRECT

FLUID LEVEL

PLANNING: DimensionsTechnical specications

PLANNING: Cable lengths

Screwdriver

Drill

Wrench

Cup or can

Tape

Tools to connect power cables to the battery

Gloves (disposable type)

PLANNING: Tools needed

Refer to“WIRING: Wiring diagram” (point 9) to nd the

various cable lengths.

PLANNING: Point-1AP and Precision-9 Compass,

Mounting location

Point-1AP and Precision-9

The compasses contain a magnetic heading sensor and should not

be mounted close to any potential magnetic source, and as close

to the vessel’s centre of roll and pitch as possible. Refer to technical

specications.

Potential sources for magnetic/electromagnetic interference include:

•Electrical Motors/Magnets/Moving Metal items

•Outboard Engines

•High current electrical sources such as main power cables,

batteries, distribution panels etc.

The Point-1AP compass also comes with a GPS antenna and should

be mounted as far as possible away from disturbing magnetic/

electromagnetic interferences.

Electromagnetic Interference Precision-9

57 mm

(2.2”)

180 mm

(7.1”)

190 mm

(7.5”)

204 mm (8.1”)

183 mm (7.2”)

91 mm

(3.6”)

169 mm (6.63”)

ø 90 mm (3.5”)

38 mm

(1.5”)

155 mm (6.1”)

76 mm (3.0”)

85 mm

(3.4”)

100 mm (4.0”)

85 mm (3.4”)

119 mm (4.69”)

36 mm

(1.42”)

119 mm (4.69”)

90 mm

(3.54”)

126 mm

(4.96”)

133 mm (5.23”)

119 mm (4.69”)

126 mm

(4.96”) 72 mm

(2.83”)

90 mm

(3.54”)

Compatibility information

The hydraulic kit comes with both 1/4 NPT 9/16 UNF ttings and ORB

ttings which make them ideally suited for the following steering

systems:

•Teleex SeaStar HC5345, HC5347, HC5348, HC5358.

•Teleex BayStar HC4600, HC4645, HC4647, HC4648, HC4658.

•Hynautic K6 Steering Rams

•Steering rams from Vetus, Uex, and Lecomble & Schmitt can also

be used.

¼Note: Newer SeaStar/BayStar helm pumps require the use of ORB

ttings (supplied in the kit).

MOUNTING: Point-1AP

B1 * Ø 19 mm (0.75”)

2 * Ø 3 mm (0.12”)

Note the mounting

direction!

1 2

3 4

Check the contents

•NAC-1 Autopilot computer

•Point-1AP or Precision-9 Compass

•Auto/Stby Button

•NMEA 2000 Network kit

•Pump-1

•Pump tting kit

Point-1AP

WIRING: Wiring diagram

15 16

Switch the autopilot to Power Steer mode.

Press and hold the arrow keys on the Autopilot controller in steps less

than 3 seconds at a time, until the cylinder reaches max travel in both

directions. The screenshots above are examples from HDS and NSS

evo2.

Continue to run the pump in both directions until no air bubbles are

left in the transparent tube.

IMPORTANT: Check uid level

MOUNTING: Bleeding the hand steering

Turn the wheel until the cylinder reaches max travel in both directions,

and rell oil.

Keep turning and relling oil until the oil level is stable and the

outboard engine responds rmly.

If air bubbles still remain in the system, follow the bleeding procedure

described for the outboard cylinder.

¼Note: It is recommended to use a threaded ller tube if available.

MOUNTING: Bleeding Pump-1

CORRECT

FLUID LEVEL

MOUNTING: Identify Type of Fitting Required

PORT

STB

PORT

IMPORTANT: TRANSPARENT HOSE

12 V DC

MAIN

POWER

SWITCH

0.9 m (3 ft)

FUSE,

20 AMP 2 m (6 ft)

1 m (3 ft)

2 m

(3 ft)

5 m

(15 ft)

0.6 m

(2 ft)

1.8 m (6 ft)

T T

3 AMP

AUTO/STBY

BUTTON

POINT-1AP 1.2 m (4 ft)

Precision-9 4.5 mm (15 ft)

POINT-1AP

RED

BLACK

YELLOW

BLUE

Precision-9

ECHO

VIDEOIN

NMEA2K

NETWORK

POWER

ECHO

VIDEOIN

NMEA2K

NETWORK

POWER

PORT

MOUNTING: Pump-1, Connect hoses

IMPORTANT: TRANSPARENT HOSE

Conguration

Compliance Statements

Refer to your Autopilot controller’s documentation for setup

instructions.

The Outboard and the DrivePilot:

•Comply with CE under EMC directive 2004/108/EC

•Comply with the requirements of level 2 devices of the

Radiocommunications (Electromagnetic Compatibility) standard

MOUNTING: Disconnecting the hoses from helm

pump

STB

PORT

Installing with optional Verado tting kit for

Pump-1

310 mm

930 mm

VERADO STEERING

CYLINDER VOLUME

APPROX. 9ci - 150 cc

VERADO ELECTRO

HYDRAULIC POWER PACK

VERADO HELM

HIGH PRESSURE

STEERING LINES

LOW PRESSURE

RETURN LINE

HIGH PRESSURE

SUPPLY LINE

RETURN LINE

EXTENSION

HIGH PRESSURE

SUPPLY LINE

HIGH PRESSURE

STEERING LINES

RETURN LINE

LOW PRESSURE

RETURN LINE

STEERING LINE

EXTENSION

STB

ORB Fittings

NPT Fittings

DO NOT USE NPT FITTINGS

The drawing shows a SeaStar helm pump which identies ttings using

text engraved on the back.

¼Note: Helm and ttings required may vary by manufacturer.

¼Note: ORB and NPT tting kits are supplied in separate bags. Discard

the ttings not used.

¼Note: Pay attention to the ports on the helm pump to ensure you are

using the correct ttings.

MOUNTING: Connect hoses to helm pump

Check all ttings for leaks.

Shop for other marine electronics & navigation on our website.

Ce manuel convient aux modèles suivants

Autres manuels Simrad Équipement marin

Simrad

Simrad Maris ECDIS900 Manuel utilisateur

Simrad

Simrad NSS evo2 Guide de démarrage rapide

Simrad

Simrad ED162 Manuel utilisateur

Simrad

Simrad TP10 Manuel utilisateur

Simrad

Simrad ES60 - REFERENCE MANUAL REV H Manuel utilisateur

Simrad

Simrad ES70 - DOWNLOAD AND INSTALLATION REV B Manuel utilisateur

Simrad

Simrad ES80 Manuel utilisateur

Simrad

Simrad ITI Manuel utilisateur

Simrad

Simrad NX40 Manuel utilisateur

Simrad

Simrad ITI TWIN RIG - QUICK REFERENCE GUIDE REV A Manuel utilisateur

Simrad

Simrad ES70 - REV A Manuel utilisateur

Simrad

Simrad IS42J Manuel utilisateur

Simrad

Simrad DD15 Manuel utilisateur

Simrad

Simrad B&G h2000 Manuel utilisateur

Simrad

Simrad NSS9 evo3S Manuel utilisateur

Simrad

Simrad EK80 Manuel utilisateur

Simrad

Simrad ITI TRAWL SYSTEM - SERIAL DATA COMMUNICATION REV... Manuel utilisateur

Simrad

Simrad BSM-2 Manuel utilisateur

Simrad

Simrad PI HBU - REV A Manuel utilisateur

Simrad

Simrad SX90 - DATASHEET FOR NAVAL AND COAST GUARD REV... Manuel utilisateur

Simrad

Simrad FS70 - REV 3 Manuel utilisateur

Simrad

Simrad GO XSE Series Manuel utilisateur

Simrad

Simrad EQ60 Manuel utilisateur

Simrad

Simrad IS42J Manuel utilisateur

Manuels Équipement marin populaires d'autres marques

Clarion

Clarion CMS2 Manuel de réparation

EBS

EBS M7000 Manuel utilisateur

Kongsberg

Kongsberg M3 Bathy Manuel utilisateur

NPK

NPK SCS-1002 Manuel utilisateur

Furuno

Furuno FE-800 Manuel utilisateur

Harken

Harken 1561 Manuel utilisateur

Notifier

Notifier FS-BSO Manuel utilisateur

Raymarine

Raymarine ST40 Manuel utilisateur

E2S

E2S E2XS112UL Manuel utilisateur

R2Sonic

R2Sonic 2026 Manuel utilisateur

COBHAM

COBHAM SAILOR 6000 Manuel utilisateur

Clarion

Clarion GR10BT Manuel de réparation

Raymarine

Raymarine Maxiview ST80 Guide de l'utilisateur

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Instructions de montage

Raymarine

Raymarine ST60 Tridata Guide de l'utilisateur

olympia electronics

olympia electronics ΒS-531/1/MAR Manuel utilisateur

Sonic

Sonic 2024 Manuel utilisateur

Quicksilver

Quicksilver 88688A25 Manuel