Simpson CLEAN MACHINE CM60976 Manuel utilisateur

Part Number 7111613 / ENGLISH REV 8 - 6/2022

CM60976

SAVE THIS MANUAL FOR FUTURE REFERENCE

USE AND CARE MANUAL

PRESSURE WASHER

READ THIS MANUAL CAREFULLY BEFORE OPERATION

Failure to follow the instructions and safety precautions in this manual can result

in property damage, serious injury and/or death.

NOTE: Photographs and line drawings used in this manual are for reference only and may not

represent your specic model.

If your pressure washer is not working or if there are parts missing or broken, please DO NOT

RETURN IT TO THE PLACE OF PURCHASE. Contact our Customer Service Department by calling

1-877-362-4271 or emailing [email protected]

Page II

NOTES

THIS PAGE WAS INTENTIONALLY LEFT BLANK

●All information in this publication was based on the latest product information available at

the time of printing. The FNA Group reserves the right to update, change, and/ improve

the product and this document at any time, without notice, and without incurring any

obligation.

● This manual may cover more than one machine. The pictures and gures in the manual

should be used for reference only. There may be di󰀨erences between your product and

the pictures, drawings, and diagrams in this manual.

DISCLAIMERS

Lifting the pressure washer by the plastic motor cover can result in damage to the

machine and potential injury. To avoid damaging the pressure washer, be sure to lift the

pressure washer by grasping the metal frame.

OPERATOR SAFETY

CAUTION:CAUTION:

Page 1

SAVE THIS MANUAL FOR FUTURE USE

Write down the model number, serial number, and purchase date of this product in the spaces

provided below then keep this manual with the purchase receipt(s) for future reference.

Keep this manual for future reference. This manual should be considered a permanent part

of the product and stay with it. This manual should be available to anyone operating the

product(s) it covers. This manual should remain with the product(s) it covers if sold to a new

owner. If the manual becomes damaged, lost, or otherwise unusable, you may download

a new copy from the product pages at www.simpsoncleaning.com or contact customer

support by calling 1-877-362-4271.

Model Number:

Serial Number:

Purchase Date:

Page 2

TABLE OF CONTENTS

Pump Maintenance

LIMITED WARRANTY 21

20SPECIFICATIONS

20STORING THE PRESSURE WASHER

Water Inlet Filter 19

Nozzle Cleaning 19

Connections 18

Cleaning the Pressure Washer 18

Maintenance 18

18MAINTENANCE

TROUBLESHOOTING 17

Pressure Washing 16

Preparation 16

Terms 16

OPERATION TIPS 16

STARTING THE PRESSURE WASHER 13

Operating Conditions 12

Location 12

OPERATING CHECKLIST 12

Nozzle Installation 11

Nozzle Selection 11

NOZZLES 11

PURGING AIR FROM THE PUMP 10

CONNECTING HOSES 9

COMPONENT LOCATION 7

UNPACKING 5

Organize Accessories 6

Assemble the Spray Gun 6

ASSEMBLY 5

Thermal Relief Valve 4

Motor Overload 4

Grounding Instructions 4

Ground Fault Circuit Interrupter Protection 4

3SAFETY INSTRUCTIONS

USING CHEMICALS 15

CAUTION:CAUTION:

NOTICE

Page 3

This manual contains important safety information and instructions. Do not operate

this product until you have read, and completely understand all safety, operation, and

maintenance instructions listed in this manual. Failure to follow the information contained

in this manual will result in property damage, injury, and/or death.

NOTE: The warnings and precautions discussed in this manual cannot cover all conditions

and situations that may occur. The operator must understand awareness and caution are

factors which cannot be built into this product and so must be exercised by the operator.

READ THIS MANUAL BEFORE OPERATING

ADDITIONAL INSTRUCTIONS

Be sure to understand the safety symbols and denitions listed below. Each symbol

contains one of four words: DANGER, WARNING, CAUTION, NOTICE, indicating

di󰀨erent levels of hazard severity. These symbols are used throughout this manual and

are followed information about a specic hazard, the consequences of the hazard, and

instructions on how to avoid the hazard. Failure to heed these symbols and follow the

instructions provided with them will result in property damage, injury, and/or death.

HAZARD ALERT SYMBOLS

Indicates an imminently dangerous situation, which if not

avoided, will result in property damage, serious injury, and/

or death.

Indicates a potentially hazardous situation, which if not

avoided, could result in property damage, serious injury, and/

or death.

Indicates a hazardous situation, which if not avoided, could

result in property damage and/or minor to moderate injury.

Indicates information considered important, but not directly

hazard related.

SAFETY INSTRUCTIONS

Along with this manual, be sure to read any additional instructions provided both on and

with the product, attached equipment, accessories, and the unit powering the product.

Pay careful attention to all additional safety rules and instructions on proper startup,

operation, and shutdown procedures. Always use any recommended protective apparel

that may be needed to operate the equipment safely.

DANGER:DANGER:

WARNING:WARNING:

Failure to read and follow the operator’s manual and all of its instructions before using

the product could result in DEATH or SERIOUS INJURY. Read this manual carefully and

become failure with your electric pressure washer. Know its applications, its limitations

and any hazards involved.

OPERATOR SAFETY

WARNING:WARNING:

Improper connection of the equipment grounding conductor can result in the risk of

electrocution. Check with a qualied electrician if you are in doubt as to whether the

receptacle is properly grounded. DO NOT modify the plug provided with this product. If

it will not t the receptacle, have a proper receptacle installed by a qualied electrician.

DO NOT use any type of adapter with this product.

ELECTROCUTION HAZARD

Page 4

This pressure washer is provided with a ground fault circuit interrupter (GFCI) built into the

plug of the power supply cord. This device provides additional protection from the risk of

electric shock.

Ground Fault Circuit Interrupter Protection

Should replacement of the plug or cord becomes necessary, use only identical replacement

parts that include GFCI protection.

Grounding Instructions

This pressure washer must be grounded. If it should malfunction or breakdown, grounding

provides a path of least resistance for electric current to reduce the risk of electric shock.

This product is equipped with a cord that contains an equipment grounding conductor and

a grounding plug. The plug must be connected to an appropriate receptacle that is properly

installed and grounded in accordance with all local codes and ordinances.

DANGER:DANGER:

Thermal Relief Valve

When the temperature inside the pump rises to a predetermined setting, this valve will open

allowing the hot water to exit and cool water to enter, cooling the pump. The value will then

close.

Motor Overload

The electric motor in this pressure washer is equipped with an thermal overload protection

device. This device will automatically shut o󰀨 the motor if the motor overheats or draws

too excessive current. If the overload protection is tripped, turn the power o󰀨 by turning

the master ON/OFF switch to the OFF (0) position. Let the unit cool for thirty (30) minutes.

After the unit has cooled, turn the master ON/OFF switch to the ON (l) position to resume

operation.

1. Install the wheels.

Slide the axle pin through the wheel, formed washer, frame and other formed washer. Slide

clip through the hole in the axle pin to secure the wheel in place. Repeats steps for the

second wheel.

2. Install the handle.

Place the handle onto the frame, depress the snap buttons and slide the handle assembly

onto the frame until the snap buttons snap into place locking the handle to the frame.

Page 5

UNPACKING

ASSEMBLY

Follow the steps outlined in this section to unpack and assemble your pressure washer.

If you have any questions regarding the unpacking or assembly of your pressure washer,

please have your model number and serial number ready, then contact customer support at

1-877-362-4271 or email [email protected].

1. Place the shipping carton on a solid, at surface.

2. Carefully cut the top of the carton open.

3. Carefully cut each corner of the carton from top to bottom.

4. Lay each side of the carton at on the ground.

5. Remove everything from the carton.

Page 6

Assemble the spray gun

Organize accessories

1. Thread the lance into the spray gun.

1. Place the spray gun and lance

assembly into the holder on the

dashboard.

2. Push the nozzles into the

rubber grommets on the

dashboard. Note: the dashboard

label indicates correct nozzle

placement.

3. Hang the high-pressure hose

with the strap holder.

Attempting to start or use the pressure washer incorrectly can result in motor and/

or pressure washer damage, and may cause serious injury or death. To avoid these

hazards, be sure to read, understand, and follow the steps outlined in the OPERATING

CHECKLIST section of the owner’s manual before beginning, and follow all the guidelines

for proper use of the pressure washer.

OPERATING CHECKLIST

WARNING:WARNING:

Page 7

COMPONENT LOCATION

1 - Handle

2 - Accessory Storage - Provides convenient storage for the included

nozzles and strap to hold the high-pressure

hose and electrical cord.

3 - Master ON/OFF

Switch

- Push the switch in to turn the pressure washer

ON. Push the switch again to turn the pressure

washer OFF.

4 - Thermal Relief

Valve

- This protective device will release hot water

from the pump when you are not spraying

water. If you will not spray for more than one

minute, turn the pressure washer OFF.

5 - Electric cord with

GFCI

- The pressure washer and operator are

protected by a ground fault circuit interrupter

(GFCI). See page 15 for more information.

Page 8

6 - Spray Wand - Allows you to switch between di󰀨erent spray

nozzles.

7 - High-Pressure

Water Outlet

- Thread the high-pressure hose onto this

connection.

8 - Water Supply Inlet - Connect the water supply using a 50ft

(15.24m) maximum length garden hose, 30ft

(9.14m) maximum if the source is a well.

9 - Detergent Tank - Prepare detergent solution as required by job.

Flush tank with fresh water when nished.

10 - Spray Gun - Controls the application of water onto the

cleaning surface with trigger device. Includes

a trigger lock.

11 - High-Pressure

Hose

- Connect one end to high-pressure water

outlet and the other end to the spray gun.

Autres manuels pour CLEAN MACHINE CM60976

Table des matières

Autres manuels Simpson Nettoyeur haute pression

Simpson

Simpson MSV2723-S Manuel utilisateur

Simpson

Simpson Super Brute 3500 Manuel utilisateur

Simpson

Simpson SuperPro Roll-Cage SW7040KUGL 49-State Manuel utilisateur

Simpson

Simpson MS60772 Manuel utilisateur

Simpson

Simpson BIG BRUTE Series Manuel utilisateur

Simpson

Simpson MS61220 Manuel utilisateur

Simpson

Simpson MS60805 Manuel utilisateur

Simpson

Simpson ALH4240 Manuel utilisateur

Simpson

Simpson MS60763-S Manuel utilisateur

Simpson

Simpson PS4240H Manuel utilisateur

Simpson

Simpson PS60842 Manuel utilisateur

Simpson

Simpson MegaShot MSV2200 Manuel utilisateur

Simpson

Simpson PS61253 Manuel utilisateur

Simpson

Simpson MSV3025-S Manuel utilisateur

Simpson

Simpson MSVK2723 Manuel utilisateur

Simpson

Simpson ALH4240 Manuel utilisateur

Simpson

Simpson MS60773 Manuel utilisateur

Simpson

Simpson PS4240 Manuel utilisateur

Simpson

Simpson Megashot MS61039 50-State Manuel utilisateur

Simpson

Simpson Water Shotgun WS5050H 49-State Manuel utilisateur

Simpson

Simpson 13SIE-170 Manuel utilisateur

Simpson

Simpson MS60799 Manuel utilisateur

Simpson

Simpson Megashot MS61049 Manuel utilisateur

Simpson

Simpson PS60995 Manuel utilisateur

Manuels Nettoyeur haute pression populaires d'autres marques

Shark

Shark RG-232637 Manuel utilisateur

Shakti Technology

Shakti Technology S3 Manuel utilisateur

Kärcher

Kärcher K 4 Pure Manuel utilisateur

Porter-Cable

Porter-Cable D25806-025-2 Manuel utilisateur

REM POWER

REM POWER HDEm 662 Manuel utilisateur

Landa

Landa HS-3000 Manuel utilisateur

Craftsman

Craftsman 580.752270 Manuel utilisateur

HIKOKI

HIKOKI AW 100 Manuel utilisateur

Delco

Delco DC 1302 Manuel utilisateur

Kärcher

Kärcher K 3 Full Control Manuel utilisateur

BIEMMEDUE

BIEMMEDUE 120/10 - 170/13 Manuel utilisateur

ARKSEN

ARKSEN 014-HG-14141-HR Manuel utilisateur

Black & Decker

Black & Decker PW1700SPX Manuel utilisateur

Kärcher

Kärcher 595 - SPARE Mode d’emploi

Kranzle

Kranzle B 10 200 Manuel utilisateur

Stihl

Stihl RE 90 Manuel utilisateur

Husky

Husky HU80911 Manuel utilisateur

PowR-Quip

PowR-Quip PQ-2600 Manuel utilisateur