User manual - INFRARED REMOTE CONTROLLER SIR-25
1. BASIC REQUIREMENTS AND USER SAFETY
- The manufacturer is not responsible for any damages caused by
inappropriate installation, not maintaining the proper technical condition
and using the unit against its destination.
- Do not attempt to disassemble, repair or modify the unit yourself. The unit
has no user serviceable parts. Units, in which a defect was stated must be
disconnected and submitted for repairs at an authorized service centre.
- In order to minimize fire or electric shock hazard, the unit must be protected
against atmospheric precipitation and excessive humidity.
- Do not use the unit in areas threatened with excessive shocks, vibrations, dust,
humidity, corrosive gasses and oils.
- Do not use the unit in explosion hazard areas.
- Do not use the unit in areas with significant temperature variations, exposed to
condensation or icing.
- Do not use the unit in areas exposed to direct sunlight.
The unit is designed for operation in an industrial environment and must
not be used in a household environment or similar.
2. GENERAL DESCRIPTION
InfraRed remote controller type SIR 25 allows to program devices made by IMEX, and
equipped with IR receivers.
3. TECHNICAL DATA
Power supply voltage 3V DC - lithium battery type CR2032
(replacement: DL2032, KCR2032)
Operation range from 0,5 to 5 m
(depend on programmed device features)
Operating temperature
torage temperature
Humidity
0°C to +50°C
-10°C to +70°C
5 to 90% no condensation
3
