Cautions
Steps
1.
2.
3.
4.
5.
6.
Put the plug in an 110V wall socket.
Pour in 80ml of water with the【Measuring cup】into the【Reservoir】. ※No water needed for the
drying process.
Put the【Main basket】onto the【Base】.
Put in the thoroughly washed and rinsed bottle(s) in the【Basket】and the accessories in the 【Upper
rack】. Place the【Upper rack】on the 【Basket】and place the【Lid】on the【Upper rack】.
Choosing the mode :
(1) Sterilizing & drying: press【Auto】, the【Steam】and【Anion Drying】lights light on, and it
sterilizes first then runs 50 minutes for drying.
(2) Sterilizing: press【Steam】, the indicate light lights on, and scrolling text is showed on the LED
display.
(3) Drying: press【Anion Drying】and the indicate light lights on, and the timing is showed on the LED
display.Each press would add 10 minutes to the drying process, and it starts at 10 to maximum 60
minutes.
Beeping after the processes are finished, and the indicate lights and power switch off automatically.
※Use the tongs to take out the bottles and accessories.
DO NOT touch the base, the basket and the lid of the sterilizer during the processes and keep out of
children reach.
DO NOT block the steam outlet of the lid with any objects during the processes.
Be carefully the heating surface after use.
Send the cracked product to the customer care center if the main cord is damaged or any malfunctions
encountered.
DO NOT attempt to open or repair the steam sterilizer yourself.
Only sterilize baby bottles and items which are suitable for sterilizers. Please refer to the user manual
of the items you want to sterilize, to make sure they are suitable for sterilizers.
Clean the sterilizer with moist cloth. Never immerse the base, the main cord, or the main plug in any
liquid.
DO NOT place the product on the carpet, blanket, or any soft surfaces to prevent blocking.
DO NOT place the sterilizer or any components on a hot surface.
Unplug the sterilizer first when an emergency happens.
Please follow the instructions for a standard sterilization process. Repeat the anion drying process if the
result is not satisfying.
The products only for the adults with normal mental ability.
DO NOT leave children unattended with the product.
The product only available in living spaces.
English
Usage
Before first time use: pour 80ml of distilled or mineral water in the reservoir of the base, and run a
complete sterilization process with empty basket.
Water: the time of one sterilization process will be determined by the amount of water used. 80ml of
distilled or mineral water is the suitable amount to complete one sterilization process.
Contents cleaning: wash and rinse the contents thoroughly before sterilizing.
Functions
Steam: for steam sterilization process.
Auto: for both sterilization and drying processes.
During the sterilization process, scrolling text will be showed
on the display until it switches to drying mode.
Anion Drying: for drying process, with multi timing options,
10, 20, 30, 40, 50, and 60 minutes.
Off: shut off all functions. Press off before switching between
modes.
5
