Silvercrest KH 2158 Manuel utilisateur

KOMPERNASS GMBH

BURGSTRASSE 21 ⋅ D-44867 BOCHUM

www.kompernass.com

ID-Nr.: KH2158-04/10-V3

KH 2158

4 C

10-in-1 Remote Control

Operating manual

Univerzalni daljinski upravljalec

 Navodilazauporabo

Univerzalni daljinski upravljač

 Uputezauporabu

10-in-1 Remote Control

KH 2158

- 1 -

INDEX PAGE

Important safety instructions 2

Device summary 3

Initial use 4

Unpacking the device/checking the package contents 4

Inserting the batteries 4

Operating components 5

LCD display 5

Buttons 6

SETUP - System settings 9

Code Setup (Programming the remote control) 11

Programming by brand code search 11

Programming by manual code input 12

Programming by automatic code search 12

System-Setup 14

Setting the time 14

Setting the date 14

Adjust contrast 15

Background Illumination 15

Setting the global volume/mute switching 15

Setting the lock function 16

System reset 17

Timer Setup 17

Sleep timer 17

Event timer 17

Learn Setup 18

Code learn function 19

Macro Setup 20

Favourites channel 21

Volume control 23

Vol +/—, (Mute switching) 23

For operation 23

All OFF 23

Cleaning and storage 24

Faults / Remedies 24

Disposal 25

Technical data 25

Note regarding conformity 26

Importer 26

Warranty & Service 26

- 2 -

Universal remote control KH2158

This documentation is copyright protected. All rights includ-

ing those of photographic reproduction, duplication and

distribution by means of particular methods (for example

data processing, data carriers and data networks), wholly

or partially as well as substantive and technical changes are

reserved.

Read the operating instructions carefully before using the de-

vice for the rst time and preserve this booklet for later refer-

ence. Pass this manual on to whoever might acquire

the device at a future date.

Important safety instructions

Proper use

Children may only operate the remote control under adult

supervision.

The universal remote control can replace a maximum of ten

remote controls. It can only be used for entertainment elec-

tronics with infrared receivers. The functions of the Universal

remote control essentially correspond to those of the original

remote control. The universal remote control is intended for

private use. It is not suitable for commercial use.

Any other use is considered improper use. The manufacturer

accepts no responsibility for damage caused by improper

handling or unauthorized reconstruction.

Warning

A warning of this danger level signies a possible dangerous

situation. If the dangerous situation is not avoided it can lead

to injuries. The directives in this warning are there to avoid

personal injuries.

Important

A warning of this danger level signies possible property

damage. If the situation is not avoided it can lead to property

damage. The directives in this warning are there to avoid

property damage.

Note

A note signies additional information that assists in the

handling of the device.

Warning of injury danger as a result of

improper handling of batteries!

Batteries must be handled with special care. Take note of the

following safety instructions:

Keep batteries well away from children. Children can

•

put batteries into their mouths and swallow them. If a bat-

tery is swallowed medical assistance must be sought IM-

MEDIATELY.

Do not throw batteries into a re. Never subject batteries

•

to high temperatures.

- 3 -

Explosion hazard! Non-rechargeable batteries must never•

be recharged.

Do not open the batteries or short-circuit them.

•

Battery acid leaking from a battery can cause inamma-•

tion of the skin. In event of contact with the skin, rinse with

large amounts of water. If the liquid comes into contact

with your eyes, rinse thoroughly with water, do not rub

and immediately consult a doctor.

Attention!

The Universal remote control contains an infrared diode

of laser class 1. In order to avoid eye injuries do not look at

the diode with optical devices.

Damage to the device

If the device is defective, do not attempt to repair it your-

•

self. In case of damage, contact the manufacturer or the

manufacturer's service hotline (see Warranty information).

If liquid escapes from the device or if the device has been

•

otherwise damaged, it must be inspected by the manu-

facturer or the manufacturer's service hotline. Contact the

manufacturer or the manufacturer's service hotline (see

Warranty information).

Take the batteries out of the battery compartment as soon

•

as they are depleted.

If you will not be using the device for a long period of time,

•

remove the batteries to prevent them from discharging.

Always change all batteries at the same time and always

•

use batteries of the same type.

Device summary

qLCD display

w/ALL OFF button

eDevice buttons

rS button

tArrow buttons

yEXIT button

uP +/— buttons

iMACRO button

oNumber buttons

aButton for one or two digit programme numbers

sTeletext function buttons

d Illumination button

fAV button

gRecord/Playback buttons

hMute switching

jVOL +/— buttons

kMENU button

lOK button

1( FAV / EPG button

2) Infrared sender/receiver

2! Battery compartment cover

- 4 -

Tips:

The functions described here pertain to the theoretically•

ideal circumstance that the button structure of the respec-

tive original remote control is identical to this universal

remote control. This only occurs, however, in rare cases. If,

therefore, not all of the original remote control's functions

can be reproduced it is not due to a diciency in the Uni-

versal remote control.

All the brand names used in these instructions or in the

•

accompanying code list are trademarks of the correspond-

ing companies.

Initial use

Unpacking the device/checking the package

contents

Warning!

Keep the plastic packaging well away from small children.

There is a risk of suocation!

Unpack the device and accessories.

•

Check the package contents•

- Universal remote control (URC),

- Operating instructions,

- Manufacturers directory with device code list:

- 2 x 1,5 V Batteries, type AAA/LR03 (Micro)

Note: Transport damage

If you notice any transport damage contact the manufacturer or

the manufacturer's Service-Hotline (see warranty information).

Inserting the batteries

Attention!

The Universal remote control must only be operated with

1.5 Volt batteries (Type AAA, LR03).

Carry out the battery change as quickly as possible. Preset

settings will remain saved for approx. 1 minute. If new batter-

ies have not been installed within this time all of the settings

will have to be carried out again. The time of day and date

will, however, be lost in either case.

- 5 -

1.Open the battery compartment cover 2! in the direction

of the arrow.

2. Insert the batteries as shown in the diagram and close the

battery compartment.

The LCD display qis activated as long as batteries are

installed. The following diagram shows the LCD display q

after the batteries have been installed or changed.

Note:

If no LCD display qis visible check the polarity of the

batteries or install new ones.

Operating components

LCD display

The LCD display q is divided into elds.

Text field 2@

Here is shown the currently selected device, for example

DVD, TV VCR etc.

Infrared symbol 2#

Every time a button is pressed, with which an infrared signal

is to be sent the Infrared symbol illuminates.

Code/Time field 2$

Here is shown the device code of the relevent selected de-

vice or the time of day. With the time of day indicator ":" the

numbers blink in the middle.

Day of the week field 2%

Here you can read the English shortened form of the current

day of the week after you have entered the date.

- 6 -

MON = Monday

Tue =Tuesday

WED = Wednesday

THU = Thursday

FRI =Friday

SAT = Saturday

SUN = Sunday

Standard display:

The standard readout of the LCD display qconsists of the

details for the relevent device, for example, "TV", the initial

for the day of the week and the time of day indicator.

Buttons

Note:

All the functions described here can, of course, only be used

if they are supported by the device being controlled.

/ALL OFF button. w

Switch device on/o. hold down for approx.

5 seconds to switch all devices on/o.

Device buttons e

The device buttons are used to select the device that should

be operated.

Television

Video recorder

Accessory unit 1

Cable receiver

CD player

Analogue satellite receiver

Audio amplier

DVD player

Digital satellite receiver

Accessory unit 2

The mentioned button allocation is not compulsory. You can,

for example, also save the code for the video recorder on

the TV slot.

- 7 -

"S" button r

Hold down for 3 seconds to access the

SETUP menu, press briey to superimpose

the date and/or to open access to addi-

tional functions such as EPG or PIP.

Arrow buttons t

Move up, right, left and down in menus.

EXIT button y

Move a level backward in the menu.

P +/— buttons u

Change the reception channel.

MACRO button i

MACRO button ifollowed by a number

button o1-6 activates a previously saved

chain of commands.

Number buttons o

Enter programme and device code numbers.

Button for one/two digit programme numbers a

For two digit programme numbers (depend-

ing on the device type) rst press

the abutton then via the number buttons o

enter the programme number.

When pressed again the display becomes

single digit once more.

Teletext function buttons s

In teletext operation the buttons have the following functions:

Access the teletext function.

In normal TV operation rst press the

S button r followed by the button to

control the “PIP” function (picture in

picture) of your television set.

Stop automatic paging forward for

multi-page teletexts.

Enlarge page presentation

Screen text and TV image one upon the

other

To end the teletext function.

- 8 -

Note:

The teletext function is only available in the European TV•

mode and your TV device must have a teletext module.

In addition the P +/- buttons

• ucontrol the following

teletext functions:

P + Leaf one page forward

P — Leaf one page backwards

Record/playback buttons f

The playback buttons fcontrol devices such as DVD/CD

players and video recorders:

Start playback

ASPECT Image format switching with TV operation.

Record

Stop Playback/Record/Wind

Pause playback

Rewind

Wind forward

AV button g

Switch to the AV input.

Mute switching h

Switch sound on/o.

VOL+/— buttons j

Set volume (Volume).

MENU button k

Access the menu of the controlled device.

OK button l

You can conrm a menu selection with the OK

button.

FAV/EPG button 1(

Press the FAV/EPG button to access your

previously programmed favourite station.

To access the electronic programme guide

of the target device rst press briey the

S button rand then the FAV/EPG button.

Autres manuels pour KH 2158

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Silvercrest Télécommande

Silvercrest

Silvercrest SFB 10.1 B2 Manuel utilisateur

Silvercrest

Silvercrest SFB. 10.1 A1 Manuel utilisateur

Silvercrest

Silvercrest SFB. 10.1 A1 Manuel utilisateur

Silvercrest

Silvercrest SFB. 10.1 A1 Manuel utilisateur

Silvercrest

Silvercrest SFB 10.1 B2 Manuel utilisateur

Silvercrest

Silvercrest SFB. 10.1 A1 Manuel utilisateur

Silvercrest

Silvercrest SFS 18 A1 Feuille d'instructions

Silvercrest

Silvercrest SFB 10.1 B2 Manuel utilisateur

Silvercrest

Silvercrest SFB 10.1 C3 Feuille d'instructions

Silvercrest

Silvercrest SFB 10.1 B2 Manuel utilisateur

Silvercrest

Silvercrest SFB10 Manuel utilisateur

Silvercrest

Silvercrest SFB. 10.1 A1 Manuel utilisateur

Silvercrest

Silvercrest SFB 10.1 B2 Manuel utilisateur

Silvercrest

Silvercrest SFB 10.1 C3 Feuille d'instructions

Silvercrest

Silvercrest SFB 10.1 B2 Manuel utilisateur

Silvercrest

Silvercrest SFB 10.1 B2 Manuel utilisateur

Silvercrest

Silvercrest KH 2159 Manuel utilisateur

Silvercrest

Silvercrest SFB 10.1 B2 Manuel utilisateur

Silvercrest

Silvercrest SFB 10.1 C3 Feuille d'instructions

Silvercrest

Silvercrest SFB 10.1 B2 Manuel utilisateur

Silvercrest

Silvercrest 10-in-1 Remote Control Manuel utilisateur

Silvercrest

Silvercrest SFB 10.1 C3 Feuille d'instructions

Silvercrest

Silvercrest KH 2158 Manuel utilisateur

Silvercrest

Silvercrest SFB 10.1 B2 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation