Silver Cross Classic Manuel utilisateur
Classic/Elegance
Chassis
IMPORTANT: KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE
2
These instructions are important.
Read these instructions carefully before use
and keep them for future reference. Your
child’s safety may be affected if you do not
follow these instructions.
Your Classic/Elegance Chassis is a high quality
Silver Cross product. It meets current British
and European safety standards and care and
regular light maintenance will ensure
long service.
Although these instructions clearly outline
the correct use of the Classic/Elegance
Chassis they do no not relate to the seat unit.
To operate the seat unit you must refer to the
separate instructions packed with your
chosen seat unit.
If somebody unfamiliar is using your Classic/
Elegance Chassis always ensure that they
read these instructions carefully so that they
understand how the product works best.
The Chassis is designed and tested to
accept the following Silver Cross seat units:
Sleepover, Sleepover Elegance, Freeway,
Ventura Plus Car Seat and the Simplicity Car
Seat.
Contents
First check all your parts have been supplied.
Your Classic/ Elegance Chassis includes:
1.1 Chassis
1.2 Shopping basket
1.3 Wheels x 4
1.1
1.3
1.2
3
silvercrossbaby.com
Preparation for use
Remove all packaging material from
your Chassis.
2.1a Attach the wheels by first removing
any axle packing protection. Present
the wheels to the axle and slide into
position.
IMPORTANT: If you have a Classic
Chassis go to point 2.2. If you have an
Elegance Chassis please read 2.1b
2.1b Please ensure that the rear wheels are
fitted to the rear axles. The rear wheels
have a toothed sprocket that allows the
brake to be applied.
2.2 Release the wheel locking clip by pulling
gently and slide the wheel to the stop
position. Release the clip and check that
the wheel has firmly attached. Repeat on
all four wheels.
2.1a
2.1b Elegance Chassis only
2.2
REAR WHEELFRONT WHEEL
4
Preparation for use (continued)
2.3 Open the chassis by sliding the
folding catches towards you.
2.4 Lift the handle and rotate into the
locked position.
2.3
2.4
5
silvercrossbaby.com
Preparation for use (continued)
2.5 Gently press down on the handle
ensuring both sides click and lock into
place.
2.6 Carefully position the basket within
the chassis frame with the lower end
towards the brake. Push down on each
locking clip to firmly secure in place.
2.7 Your Chassis is now ready for use.
2.5
2.6
2.7
6
3.2
3.1 Using the brake
3.1 To engage the brake simply press down
on the brake pedal.
WARNING: Always check your
brake is fully engaged by gently
rocking your chassis.
3.2 To disengage the brake simply press on
the top of the brake pedal or gently flick
the pedal upwards with your foot.
7
silvercrossbaby.com
Height adjustable handle
4.1 To adjust the handle simply press both
the adjuster buttons and rotate to the
desired height. Release buttons to lock.
4.2 Your handle has various different
positions and should always lock firmly
into place.
4.1
4.2
8
clickclick
5.1
5.2
5.3
Folding the chassis
5.1 Slide the folding catches towards you
until the locking catches disengage on
both sides.
Note: The secondary safety
catch will lock at this stage.
5.2 To disengage the secondary safety
lock, slightly press down on the handle
allowing the secondary lock to swing
freely. Lift upwards allowing the handle
to move forward, freely.
5.3 Rotate the handle until it is parallel to
the wheels and press down on both
sides until you hear a click on both sides.
9
silvercrossbaby.com
Folding the chassis (continued)
5.4 Your chassis has an automatic locking
catch which secures your chassis for easy
transportation and storage.
5.5 For the most compact fold, adjust the
handle and rotate it towards the floor,
then lock.
5.6 The wheels are removable by lifting the
wheel clip (see point 2.2) towards you
and pulling the wheel away from the
axle.
5.4
5.6
5.5
10
Attaching the Ventura Plus
Car Seat
6.1 To attach your Ventura Plus car seat to
the Chassis, hold the car seat centrally
over the chassis mounting bars. On the
underneath of the Ventura Plus are four
locking points, lower the car seat onto
the chassis mounting bars so that these
locate and ‘click’. Gently lift the car seat
to ensure it is fully locked on to the
chassis.
6.2 To disengage the Ventura Plus, there is
a release handle on the rear of the car
seat, pull this upwards whilst holding the
car seat by the handle. You can now lift
the Ventura Plus off the chassis.
6.1
6.2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Silver Cross Accessoires
Silver Cross
Silver Cross Ride-on Board Manuel utilisateur
Silver Cross
Silver Cross INSECT NET Manuel utilisateur
Silver Cross
Silver Cross Musical Mobile Manuel utilisateur
Silver Cross
Silver Cross Accessory Pack Manuel utilisateur
Silver Cross
Silver Cross FOOTMUFF Manuel utilisateur
Silver Cross
Silver Cross Ride-on Board Manuel utilisateur
Silver Cross
Silver Cross Wayfarer Cup Holder Manuel utilisateur
Silver Cross
Silver Cross Doll’s Pram Manuel utilisateur
Silver Cross
Silver Cross Linear Chassis Manuel utilisateur
Silver Cross
Silver Cross Wave tandem seat Manuel utilisateur
