Silencer Silencer ALA95FKE Manuel utilisateur

VEHICLE CONTENTS

PROTECTION MODULE

OPERATION MANUAL

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference; and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications

to this equipment. Such modifications could void the user’s authority to operate the equipment.

Model: ALA95FKE

Congratulations on your purchase of Silencer’s “Vehicle Contents Protection

Module”. The Silencer VCPM was designed to enhance your vehicle’s exist-

ing security system by providing protection for items inside the passenger’s

compartment of your vehicle. Typically, a factory installed security system is

designed to prevent the theft of the vehicle but it usually will not protect the

contents of the passenger’s compartment. With the addition of the Silencer

VCPM your vehicle is protected from theft and the items inside the vehicle

are also protected.

To operate your new Silencer Vehicle Contents Protection Module, follow

the instructions enclosed.

There are two (2) components of the VCPM that you will need to know how

to use. The rest of the operation is automatic.

Daily Operation

1. The LED indicates to you and others that the VCPM is active and pro-

tecting the interior of your vehicle when it is flashing.

2. Every time you turn off the ignition of your vehicle, the LED will begin

to flash. When the ignition key is on, the LED is off .

Note: In some vehicles the LED and valet switch will be in separate locations while in other

vehicles, they will be located together in a housing at the bottom edge of the dashboard.

Valet Switch LED Indicator

There may be a time when you want to disable your VCPM such as when you

give your vehicle to a mechanic or you are getting your car washed.

Putting your VCPM into “Valet Mode”:

1. Turn off your ignition key (the LED on the VCPM will begin to flash)

2. Locate the valet switch and flip it to the opposite position (The LED will

stop flashing and LED will be off).

Note: Use of the valet mode will not effect the vehicle security system

once it is set off (Triggered). When the vehicle security system is trig-

gered, press the “Unlock” button on your dealer supplied transmitter

to disarm the vehicle security system.

Getting Out of Valet Mode:

If you forget to turn your VCPM back on, the LED will remind you that the

unit is in valet mode. In valet mode, the LED will be ON and NOT flashing

every time you turn the ignition key on.

To get out of valet mode, simply locate the valet switch and flip the switch

to the opposite position.

Valet Mode

Flashing LED Indicator

ALA95FKEUM

10-23-01 Rev. A

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Silencer Alarme de voiture

Silencer

Silencer 7905P Manuel utilisateur

Silencer

Silencer 4900 Series Manuel utilisateur

Silencer

Silencer 30SL Manuel utilisateur

Silencer

Silencer 6904A Manuel utilisateur

Silencer

Silencer 50SL Manuel utilisateur

Silencer

Silencer 8900 Series Manuel utilisateur

Silencer

Silencer SL-2 Mode d’emploi

Silencer

Silencer 7921P Manuel utilisateur

Manuels Alarme de voiture populaires d'autres marques

Clifford

Clifford 3606X Manuel utilisateur

Ultra Start

Ultra Start 2500M SERIES Manuel utilisateur

Ultra Start

Ultra Start 650 Series Manuel utilisateur

Audiovox

Audiovox Prestige Platinum+ APS-511C Manuel utilisateur

Sparkrite

Sparkrite SRA8 Manuel utilisateur

Viper

Viper 4708V Manuel utilisateur

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manuel

Falcon

Falcon Predator XL3 Guide de l'utilisateur

Audiovox

Audiovox Auto Security XR91 Mode d'emploi

Clifford

Clifford Sabre II Manuel utilisateur

CrimeStopper

CrimeStopper CS-8717 Guide de démarrage rapide

Ultra Start

Ultra Start 450 SERIES Manuel utilisateur

Scytek electronic

Scytek electronic Vectra X3 Manuel utilisateur

Excalibur

Excalibur AL-1860-EDPB Manuel utilisateur

Clifford

Clifford CYBER 2 Manuel utilisateur

Gemini

Gemini 7057 Manuel utilisateur

FlashLogic

FlashLogic FLRSBA PRESTIGE Manuel utilisateur

Magicar

Magicar FAI-440 Manuel utilisateur