SIIG AV-GM0843-S1 Manuel utilisateur

4x2 HDMI 2.0a Matrix

P/N: AV-GM0843-S1

Safety and Notice

The AV-GM0843-S1 4x2 HDMI 2.0a Matrix has been tested for conformance to safety

regulations and requirements, and has been certified for international use. However, like all

electronic equipments, the AV-GM0843-S1 should be used with care. Please read and follow

the safety instructions to protect yourself from possible injury and to minimize the risk of

damage to the unit.

●Follow all instructions and warnings marked on this unit.

●Do not attempt to service this unit yourself, except where explained in this manual.

●Provide proper ventilation and air circulation and do not use near water.

●Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

●Use only the power adapter and power cords and connection cables designed for this unit.

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

TABLE OF CONTENTS

INTRODUCTION.................................................................................................................1

FEATURES.........................................................................................................................1

PACKAGE CONTENTS......................................................................................................1

SPECIFICATIONS..............................................................................................................2

PANEL DESCRIPTIONS.....................................................................................................3

CONNECTION DIAGRAM ..................................................................................................4

OPERATION APPROACH..................................................................................................5

EDID LEARNING..............................................................................................................13

FAQ ..................................................................................................................................14

WARRANTY .....................................................................................................................15

INTRODUCTION

The AV-GM0843-S1 4x2 HDMI 2.0a Matrix provides the most flexible and cost effective solution in

the market to route high definition video sources plus multi-channel (up to 7.1-channel) digital

audio from any of the four HDMI sources to the remote displays at the same time. This solution is

well suited for use in home theater, conference room presentation systems, or other similar setting

or application.

FEATURES

HDMI 2.0a compliant

Supports 4K2K@60 4:4:4 8bits

Supports HDR*, which is 4K2K@60 4:2:0 10bits**

HDCP 2.2 and 1.4 compliant

Wide frequency range: 25MHz~600MHz

Video bandwidth: 18Gbps

Supports xvYCC, x.v.Color & Deep Color

Supports Dolby Digital(+), DTS-HD and Dolby TrueHD audio

Allows any source to be displayed on multiple displays at the same time

Allows any HDMI display to view any HDMI source at any time

Supports default HDMI EDID and learns the EDID from displays

The matrix master can switch every output channel to any HDMI input by IR remote control,

RS-232 control, IP control and web interface.

Easy installation with rack-mounting and wall-mounting designs for master and receiver

respectively

Supports ARC from Output2

PACKAGE CONTENTS

●1x AV-GM0843-S1 ●1x DC 5V 4A

●1x IR receiver ●1x IR Remote control*

●1x Rack-mounting ear set ●1x User Manual

●1x Installation software CD

* HDR = High Dynamic Range.

** The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384MHz, and the 4K2K@60 4:4:4 8bits

is 594MHz

SPECIFICATIONS

Model Name

AV-GM0843-S1

Technical

Role of usage

True 4x2 matrix

HDMI compliance

3D & 4K2K@60Hz

HDCP compliance

Yes

Video bandwidth

Single-link 594MHz [18 Gbps]

Video support

Up to HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)

Audio support

Surround sound (up to 7.1ch) or stereo digital audio

ESD protection

Human body model —±15kV [air-gap discharge] & ±8kV [contact discharge]

Input

4x HDMI / 1x RS-232 / 1x Ethernet

Output

2x HDMI / 2x SPDIF / 2x RCA

IR remote control

Electro-optical characteristics: = 25° / Carrier frequency: 38kHz

HDMI connector

Type A [19-pin female]

RJ-45 connector

WE/SS 8P8C with 2 LED indicator

RS-232 connector

DE-9 [9-pin D-sub female]

Mechanical

Housing

Metal enclosure

Dimensions

[L x W x H]

Model

290 x 71 x 43mm [11.4" x 2.8" x 1.7"]

Package

376 x 240 x 112mm [1'2" x 9.4 x 4.4"]

Carton

590 x 510 x 405mm [1'9" x 1'7" x 1'3"]

Weight

Model

792g [1.7 lbs]

Package

1600g [3.5 lbs]

Fixedness

1RU rack-mount with ears and Wall hanging holes

Power supply

5V 4A DC

Power consumption

20 Watts [max]

Operation temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

PANEL DESCRIPTIONS

Front Panel

1. Power LED: Power indicator LED

2. System IR Receiver: Ext. IR receiver

3. Port 2 Channel Push Button: Select input channel

4. Port 1 Channel Push Button: Select input channel

5. Selected Source Status LED: When users use port channel push button, the indicator

LED will show the selected source

Rear Panel

6. Input 1~4: HDMI inputs

7. S/PDIF Out [ARC][From the display connected to Output 2]: Connect to an S/PDIF digital

audio output

8. Output 1~2: HDMI output ports

9. SPDIF Out [Follow Output 2]: Connect to an S/PDIF digital audio output

10. Stereo Out –R[Follow Output 2]: Connect to an analog audio output

11. Ethernet: Ethernet control port

12. +5V DC: 5V 4A DC power jack

13. Stereo Out –L[Follow Output 2]: Connect to an analog audio output

14. RS-232: RS-232 control port

CONNECTION DIAGRAM

OPERATION APPROACH

Method A: Push-in Button

1. IN/OUT MAP

1) Use Port 1 or Port 2 Channel Push Button to select the source

2) Input1~4 can be selected in order

Method B: IR Remote Control

1. IN/OUT Switch

Push the button on the checkerboard to select Input & Output port.

Ex: Select Input 3 to Output 2

Push the red circle button as below to select Input 3 to Output 2

2. Function Key

Button

Function

OFF

Standby mode

Power on the matrix switcher

MUTE

Turn off output’s video and audio

STATUS

Preset output status

SAVE

Save current mapping mode

PRESET

Preset mapping mode

DEFAULT EDID

Begin default EDID selection

LEARN EDID

Begin EDID learning from one output

CLEAR

Clear the previous IR operation procedure

TAKE

Trigger the previous setting

Reserved

Operation

Procedure

Output Status

Status + A~B(Output 1~2) + Take

Ex: Output 2

(Input 2)

1.Press “STATUS” button

2.Press number key “B” to select Output 2

3.Press “TAKE” button

Save Current Mapping

Save + A~H(1-8 storage site) + Take

Ex: Save current mapping to 5

1.Press “SAVE” button

2.Press number key “E” to select the storage site 5

3.Press “TAKE” button

Preset Mapping

Preset + A~H(1-8 storage site) + Take

Ex: Preset saved mapping from 5

1.Press “PRESET” button

2.Press number key “E” to select the storage site 5

3.Press “TAKE” button

Learn default EDID

Default EDID + A~H(1-8 default EDID) +Ⅰ~Ⅳ(input 1~4) + Take

Ex: Default EDID 2

Input 3

1.Press “DEFAULT EDID” button

2.Press number key “B” to select default EDID 2

3.Press number key “Ⅲ” to select Input 3

4.Press “TAKE” button

Learn Output EDID

Learn + A~B(Output 1~2) +Ⅰ~Ⅳ(input 1~4) + Take

Ex: Learn Output 2

Input 3

1.Press “LEARN” button

2.Press number key “B” to select Output 2

3. Press number key “Ⅲ” to select Input 3

4.Press “TAKE” button

Mute Output

Mute + A~B(Output 1~2) + Take

Ex: Mute Output 2

1. Press “MUTE” button

2. Press number key “B” to select Output 2

3.Press “TAKE” button

Method C: Software Control through RS-232 port / Ethernet port

1. System Requirement

1) OS Information: MS WinXP/7

2) Baud rates: 9600

3) Software size: 3 MB

4) Minimum RAM requirement: 256 MB

Method D: Software Control through RS-232 port

Power ON/ Standby mode

I/O Routing Button

Control SW via RS-232

EDID Button

Control SW via Network

F/W Update & Default Reset Button

COM Port Selection

1. I/O Routing Button

1) I/O Mapping:

a) Click the button on the checkerboard to select Input & Output port

2) Recall Mapping:

a) Select the stored Mapping(1-8)

b) Click “Recall” button to recall previous mapping which are saved

3) Save Mapping:

a) Select Mapping(1-8)

b) Click “Save” button to save current mapping

Table des matières

Autres manuels SIIG Commutateur matriciel

SIIG

SIIG AV-GM0803-S1 Manuel utilisateur

SIIG

SIIG AV-GM07R3-S12 Manuel utilisateur

SIIG

SIIG AV-GM07A3-S1 Manuel utilisateur

SIIG

SIIG AV-GM07U3-S1-V2 Manuel utilisateur

SIIG

SIIG AV-GM07X3-S1 Manuel utilisateur

SIIG

SIIG AV-GM0743-S1 Manuel utilisateur

SIIG

SIIG AV-GM0783-S1 Manuel utilisateur

SIIG

SIIG AV-GM0703-S1 Manuel utilisateur

SIIG

SIIG CE-H27Q11-S1 Manuel utilisateur

SIIG

SIIG AV-GM07L3-S1 Manuel utilisateur

SIIG

SIIG AV-GM08F3-S1 Manuel utilisateur

SIIG

SIIG AV-GM07C3-S1 Manuel utilisateur

SIIG

SIIG AV-GM06X3-S1 Manuel utilisateur

SIIG

SIIG CE-H23H11-S1 Manuel utilisateur

SIIG

SIIG AV-GM07G3-S1 Manuel utilisateur

SIIG

SIIG 4x2 HDMI Manuel utilisateur

SIIG

SIIG CE-H21F11-S1 Manuel utilisateur

SIIG

SIIG AV-GM06Y3-S1 Manuel utilisateur

SIIG

SIIG CE-H24W11-S1 Manuel utilisateur

SIIG

SIIG AV-GM07J3-S1 Manuel utilisateur

SIIG

SIIG AV-GM0823-S1 Manuel utilisateur

SIIG

SIIG AV-GM07N3-S1 Manuel utilisateur

SIIG

SIIG MA-1088D Manuel utilisateur

SIIG

SIIG AV-GM07P3-S1 Manuel utilisateur

Manuels Commutateur matriciel populaires d'autres marques

Broadcast Tools

Broadcast Tools SS 8.2 Manuel utilisateur

Altimium

Altimium MATF32 Manuel utilisateur

ALFAtron

ALFAtron ALF-MUK44N Manuel utilisateur

Monoprice

Monoprice Blackbird 15377 Manuel utilisateur

Kramer

Kramer XL 3216VS Manuel utilisateur

PTN

PTN FMX12 Manuel utilisateur

CYP

CYP nT15GX01 Manuel utilisateur

Kramer

Kramer VP-2x2 Manuel utilisateur

Kramer

Kramer Sierra Video 6432V5xl Manuel utilisateur

TESmart

TESmart HMA0402A40 Manuel utilisateur

Octava

Octava HD4XSTPMX Manuel utilisateur

Intelix

Intelix FLX-88 Mode d'emploi

Kramer

Kramer LASSEN XL 3232S Manuel utilisateur

Roland

Roland XS-1HD Manuel utilisateur

Kramer

Kramer VS-66HDCPxl Manuel utilisateur

Atlona

Atlona AT-HDMI-22M Manuel utilisateur

Link

Link HD8X8 Manuel utilisateur

AMX

AMX AVS-OP-2020-117 Instructions et recettes