
9. Program Reminder Call
0. Exit (return to Main Menu)
Programming Telephone/Pager Numbers
The Alarm Alert stores up to four (4) emergency telephone or pager numbers. The
Alarm Alert will call each phone number until the PIN number is entered. If Alarm
Alert reaches an answering machine, it will leave your personal identification message,
and then the alarm condition, but will continue calling.
First Time Number Programming:
1 From the Program Menu, Select 1for the primary number, 2 for the secondary
number, 3for the third number, or 4for the fourth number.
2 You will hear “Enter number then press pound”
3a For voice phone numbers enter the full phone number
(1 + area code if necessary) followed by the # key.
3b For pager numbers enter *then enter the full pager number
(1 + area code if necessary) followed by the # key.
4 You will hear the telephone number you just entered.
5 You will be automatically returned to the Program Menu Note: If an extra delay
between digits is required, entering * will provide a two second delay. Do not enter
* for the first digit unless programming a pager number.
To program the second, third, and fourth numbers repeat above steps, entering 2, 3,
and 4 respectively from the program menu.
To Change a Phone Number:
1 Select the phone number to change from the Program Menu
2 You will hear the selected telephone number
3 You will hear “Press one to change”
4 Press 1to change
5 You will hear “Enter number then press pound”
6a For voice phone numbers enter the full phone number
(1 + area code if necessary) followed by the # key.
6b For pager numbers enter *then enter the full pager number
(1 + area code if necessary) followed by the # key.
7 You will hear the telephone number you just entered.
8