Siemens IMPACT Pro R Manuel utilisateur

IMPACT Pro R

Instructions and guidance

Your IMPACT Pro R

hearing instrument

Click MouldClick Dome

Your hearing instruments have one of

the following ear pieces:

Features

Receiver Unit

2 Click Dome

3 Battery compartment

4 Push Button

5 Microphone Cover

6 Click Mould

7 Grid

8 HF-4 Wax Guard

1. Open the battery

compartment

Changing the atteries

3. Close battery door

2. Remove coloured

sticker from new

battery, place battery

in drawer with + symbol on battery

+ side up. (You should only remove

the protective sticker if you actually

use the battery)

Your hearing instrument may be

programmed to inform you when the

battery should be replaced for best

system performance. You may hear an

intermittent series of beeps and/or

experience low amplification power or

volume. Change the battery when

either of these occur.

Low Battery indicator

NOTICE

Do not use lubricant when you

insert the Click Dome/Mould,

because it may clog the sound

outlet

or hearing instruments with a

Click Mould, handle by holding the

Click Mould. Do not pull the tube

Inserting and removing

your hearing instrument

Inserting your hearing instrument

Turn your hearing instrument off

Hold the receiver with the Click

Dome/Mould between your thumb

and index finger and insert it

carefully into the ear canal. You may

find it helpful to pull your ear

slightly upward or to the back

Place your hearing instrument

behind your ear

Turn your hearing instrument on

Removing your hearing instrument

Turn your hearing instrument off

Hold the Receiver Unit/Click Mould

between your thumb and index

finger and carefully pull it out. You

may find it helpful to lightly push

your ear from the back

CAUTION

Attach the Click Dome properly.

If the Click Dome remains in the

ear, have it removed by your NHS

Audiologist.

Switching the

instrument on/off

Off:

Press open the battery

compartment to the

first stop to switch off.

On:

Close the battery

compartment fully

to switch on.

Selecting the

hearing program

The IMPACT Pro R can be programmed

with up to 5 hearing programs which

are selected with a program button.

Each time the button is pressed the

instrument changes to the next

program, which is confirmed with

beep tones. The number of beep tones

is the same as the selected program.

Hearing program

1. Everyday listening

2................................

3................................

4................................

5................................

Your NHS Audiologist will complete

your program details elow:

IMPACT Pro R will always be on

program 1 when initially switched on.

Power-on delay

Your hearing instrument may be

equipped with a “power-on delay”

feature.

This feature delays sound from entering

your hearing instrument when it is first

turned on, so that you may insert the

hearing instrument into your ear

without experiencing unpleasant

feedback (whistling).

On/Off using the program utton

Your IMPACT Pro R can also be

programmed by your NHS Audiologist

to be turned on and off using the

program button.

Optional

Click Domes

and Click Moulds

Cleaning

Cerumen (ear wax) on the Click

Domes and Click Moulds can affect

sound quality.

Clean Click Domes and Click Moulds

immediately after taking the

hearing instrument off. This way

cerumen can not dry and harden.

NOTICE

Click Domes and Click Moulds are easily

damaged when handled wrongly.

Never use sharp objects for

cleaning

Never wash Receiver unit under

a tap

Never use pressure or rotating

action while cleaning

Do not spray cerumen solvent

directly onto the Grid

Do not pull the receiver out of the

Click Mould

The Click Mould is fitted with a

wax filter which will require

changing regularly

Table des matières

Autres manuels Siemens Prothèse auditive

Siemens

Siemens miniTek Manuel utilisateur

Siemens

Siemens Insio binax Manuel utilisateur

Siemens

Siemens ePen Manuel utilisateur

Siemens

Siemens IMPACT L Manuel utilisateur

Siemens

Siemens Pure 700 Manuel utilisateur

Siemens

Siemens Sirion 2 Manuel utilisateur

Siemens

Siemens Reflex M Manuel utilisateur

Siemens

Siemens Motion 701 BTE Manuel utilisateur

Siemens

Siemens easyTek Manuel utilisateur

Siemens

Siemens Cellion primax Manuel utilisateur

Siemens

Siemens Pure Binax Manuel utilisateur

Siemens

Siemens Octiv Custom+ Manuel utilisateur

Siemens

Siemens BTE Manuel utilisateur

Siemens

Siemens BTE series Guide de l'utilisateur

Siemens

Siemens Impact M Manuel utilisateur

Siemens

Siemens Motion 701 BTE Manuel utilisateur

Siemens

Siemens MUSIC Pro Manuel utilisateur

Siemens

Siemens ePocket Manuel utilisateur

Siemens

Siemens SecureEar Manuel utilisateur

Siemens

Siemens Life micon Manuel utilisateur

Siemens

Siemens ConnexxLink Manuel utilisateur

Siemens

Siemens Tek wireless enhancement Manuel utilisateur

Siemens

Siemens C-Guard Manuel utilisateur

Siemens

Siemens Nitro Manuel utilisateur

Manuels Prothèse auditive populaires d'autres marques

Sonic

Sonic Bliss miniBTE Manuel utilisateur

Lexie

Lexie B1 Manuel de la liste des pièces

Widex

Widex FM+DEX Manuel utilisateur

Camplicomms

Camplicomms HC-200 Manuel utilisateur

Widex

Widex SUPER 220 S2-VSD Manuel utilisateur

Phonak

Phonak Q90 Manuel utilisateur

Williams Sound

Williams Sound SoundPlus WIR 237 Mode d’emploi

Oticon Medical

Oticon Medical Ponto SoundConnector Manuel utilisateur

Starkey

Starkey Destiny Manuel utilisateur

Audicus

Audicus The Icon Manuel utilisateur

Advanced Bionics

Advanced Bionics Slim HP Standard Manuel utilisateur

Widex

Widex DREAM440 THE DREAM SERIES Manuel utilisateur

Phonak

Phonak myPilot Manuel utilisateur

NIKEN

NIKEN NK-401 Manuel utilisateur

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur

Sonetik

Sonetik GOHEAR Manuel utilisateur

Widex

Widex FL-9 Manuel utilisateur

Panasonic

Panasonic WH-216KZ Instructions de montage