Siemens CZM-4 Manuel utilisateur

Description

The Conventional Zone Module CZM-4 is used with the

MXL to provide four Class A (Style D) or Class B (Style

B) conventional initiating device circuits. Each circuit can

monitor up to 30 Siemens Fire Safety two wire photo-

electric or ionization smoke detectors and an unlimited

number of normally open contact devices. Projected

Beam Detectors may also be used. The CZM-4 circuits

will support the use of Detector Relay Bases, Audible

Bases and Remote Indicator Lamps. Activation of any

device on a circuit will initiate a zone alarm condition

resulting in the operation of programmed functions. Any

circuit in the alarm or trouble condition will be identified

by a user specified 32 character alphanumeric message

displayed on the MXL LCD annunciator.

5003

CATALOG NUMBER

• Four Conventional Initiating Device Circuits

• Supports the Use of:

30 Two Wire Photo or Ion Detectors Per Circuit

Projected Beam Detector (Limit 1 Per Circuit)

Unlimited Shorting Devices

Detector Relay Bases

Audible Bases

Remote Indicator Lamps

• Class A (Style D)

• Class B (Style B)

• On-Board Microprocessor

• 32 Character Custom Alphanumeric Message

Per Circuit

• Optional Alarm Verification by Circuit

• Walk Test by Circuit

• Circuits Power Limited per NEC 760

• Listed, ULC Listed, FM, CSFM, NYMEA

and City of Chicago Approved

CZM-4

Conventional Zone Module

Each of the CZM-4’s circuits are designed to function in a

local “Degrade” mode during failure of the MXL main

processor or the loss of the system communication

network. While in the “Degrade” mode the CZM-4 is still

capable of reporting both alarm and trouble conditions and

activating local outputs.

Any or all of the CZM-4 circuits can be programmed to

operate with the “AlarmVerification”feature. This feature

allows the automatic verification of alarm conditions caused

by smoke detectors in order to prevent nuisance alarms.

The CZM-4 module plugs into one full slot in the MOM-2

or MOM-4 expansion card cage. Up to two CZM-4 mod-

ules may be plugged into a MOM-4 card cage.

May 2002

Supersedes sheet dated 8/99

Siemens Building Technologies

Fire Safety

8 Fernwood Road

Florham Park, NJ 07932

Tel: (973) 593-2600

FAX: (973) 593-6670

Website: www.sbt.siemens.com/fis

5/02

SFS-IG

Printed in U.S.A.

Fire Safety

2 Kenview Boulevard

Brampton, Ontario

Canada L6T 5E4

Tel: (905) 799-9937

FAX: (905) 799-9858

Electrical Specifications

Electrical Connections

1. Initiating device circuits:

Voltage range 20-24.5VDC

Supervisory current 4mA max. capacitor EOL

9mA max. resistor EOL

Alarm current 180mA max. per zone

2. Initiating devices per zone:

Up to 30 detectors, any combination of those in No. 3

below. Up to five waterflow switches may be used.

Any number of direct shorting devices may be used.

Wiring may be Style D (Class A) or Style B (Class B).

3. The UL identifiers for compatibility are the same as the

model names specified below. Compatible

Siemens Fire Safety detectors are:

Detector Installation Instructions

DI-3/3H P/N 315-081943

DI-A3/A3H P/N 315-081943

DI-4A/4H P/N 315-085257

DI-6 P/N 315-085257

DI-B3/B3H P/N 315-086590

P/N 315-086591

P/N 315-086592

PE-11/PE-11T P/N 315-094198

DT-11 P/N 315-095429

PE-3000/3000T P/N 315-086441

PE-3/3T P/N 315-086545

PBA-1191 P/N 315-094912

4. All circuits are power limited to NFPA 70 per NEC 760.

Each detector or group of detectors must use a two

wire circuit of at least 18 AWG thermoplastic fixture

wire enclosed in conduit, or 18 AWG limited energy

shielded cable without conduit, if permitted by local

building codes.

5. Total circuit resistance must not exceed 70 ohms, 40

ohms if relay bases are used.

Ordering Information

Dimensions

Refer to Installation Instructions P/N 315-090726

Table des matières

Autres manuels Siemens Alarme incendie

Siemens

Siemens FDOOT241-9 Manuel utilisateur

Siemens

Siemens HFPT-11 Manuel de service

Siemens

Siemens Cerberus PRO FS720 Manuel utilisateur

Siemens

Siemens FireSeeker FS-100 Manuel utilisateur

Siemens

Siemens HMS-SZ Manuel utilisateur

Siemens

Siemens FC901 Guide de l'utilisateur

Siemens

Siemens FC2005 Manuel du propriétaire

Siemens

Siemens MSI-30B Manuel utilisateur

Siemens

Siemens FDM275-O Manuel utilisateur

Siemens

Siemens FP-11 FirePrint Manuel de référence

Siemens

Siemens FT2040 Mode d’emploi

Siemens

Siemens FC700A Manuel technique

Siemens

Siemens CERBERUS AlgoRex Series Feuille d'instructions

Siemens

Siemens FDMH294-R Manuel utilisateur

Siemens

Siemens FDCW221 Manuel utilisateur

Siemens

Siemens FDOOT221 Manuel utilisateur

Siemens

Siemens FS720 Series Mode d’emploi

Siemens

Siemens FS720 Series Mode d'emploi

Siemens

Siemens FDM223 Manuel utilisateur

Siemens

Siemens FCM2041-U3 Manuel utilisateur

Siemens

Siemens Cerberus CS1140 Mode d’emploi

Siemens

Siemens FireSeeker FS-250 Manuel utilisateur

Siemens

Siemens SSD-C Manuel utilisateur

Siemens

Siemens DM1132 Manuel utilisateur

Manuels Alarme incendie populaires d'autres marques

Zeta Alarm Systems

Zeta Alarm Systems INFINITY ID2 Manuel utilisateur

System Sensor

System Sensor 22051TLE-RF-26 Manuel utilisateur

Pittway

Pittway Notifier AM2020 Manuel utilisateur

Ampac

Ampac ZoneSense Manuel utilisateur

Kidde

Kidde VM-1 Manuel du produit

LST

LST SIM016-3 Manuel utilisateur

Fireboy- Xintex

Fireboy- Xintex FBD-MZ Instructions originales

bolid

bolid S2000-IP-03 Manuel utilisateur

GST

GST DI-9204 Manuel utilisateur

E2S

E2S BExTBG05D Manuel utilisateur

Notifier

Notifier UZC-256 Manuel utilisateur

Fire-Lite Alarms

Fire-Lite Alarms MS-2 Manuel utilisateur

hyfire

hyfire HY5000 Series Manuel utilisateur

FlameStop

FlameStop PFSIFP8 Manuel utilisateur

Radionics

Radionics Radionics 9124 Manuel utilisateur

UniPOS

UniPOS FD 7120 Manuel utilisateur

FIREWOLF

FIREWOLF FW-C01224 Manuel utilisateur

Ziton

Ziton ZP787-3 Instructions de montage