Siemens MICROMASTER 440 Manuel utilisateur

MICROMASTER 440

0.12 kW - 250 kW

Operating Instructions Issue 12/02

User Documentation

6SE6400-5AW00-0BP0

MICROMASTER 440 Documentation

Getting Started Guide

Is for quick commissioning with SDP and BOP.

Operating Instructions

Gives information about features of the

MICROMASTER 440, Installation, Commissioning,

Control modes, System Parameter structure,

Troubleshooting, Specifications and available options

of the MICROMASTER 440.

Parameter List

The Parameter List contains the description of all

Parameters structured in functional order and a

detailed description. The Parameter list also includes

a series of function plans.

Catalogues

In the catalogue you will find all the necessary

information to select an appropriate inverter, as well

as filters, chokes, operator panels and

communication options.

MICROMASTER 440

0.12 kW - 250 kW

Operating Instructions

User Documentation

Issue 12/02

Valid for Issue 12/02

Inverter Type Software Version

MICROMASTER 440 2.0

0.12 kW - 200 kW

Overview 1

Installation 2

Commissioning 3

Using the

MICROMASTER 440

System Parameters 5

Troubleshooting 6

Specifications 7

Options 8

Electro-Magnetic

Compatibility

Appendices

Index

MICROMASTER 440 Operating Instructions

4 6SE6400-5AW00-0BP0

 

Not all inverters currently have UL approval.

UL listing can be determined by examining the

inverter's Rating Label.

For UL listed products the following UL mark is used:

Note: UL certification is presently in progress!

Further information can be obtained from Internet

website:

http://www.siemens.de/micromaster

Approved Siemens Quality for Software and Training

is to DIN ISO 9001, Reg. No. 2160-01

The reproduction, transmission or use of this document,

or its contents is not permitted unless authorized in

writing. Offenders will be liable for damages. All rights

including rights created by patent grant or registration of a

utility model or design are reserved.

MICROMASTER® is a registered trademark of Siemens

Other functions not described in this document may be

available. However, this fact shall not constitute an

obligation to supply such functions with a new control, or

when servicing.

We have checked that the contents of this document

correspond to the hardware and software described.

There may be discrepancies nevertheless, and no

guarantee can be given that they are completely identical.

The information contained in this document is reviewed

regularly and any necessary changes will be included in

the next edition. We welcome suggestions for

improvement.

Siemens handbooks are printed on chlorine-free paper

that has been produced from managed sustainable

forests. No solvents have been used in the printing or

binding process.

Document subject to change without prior notice.

Order number: 6SE6400-5AW00-0BP0

Siemens-Aktiengesellschaft

Issue 12/02 Foreword

MICROMASTER 440 Operating Instructions

6SE6400-5AW00-0BP0 5

Foreword

User Documentation

WARNING

Before installing and commissioning the inverter, you must read all safety

instructions and warnings carefully including all the warning labels attached to the

equipment. Make sure that the warning labels are kept in a legible condition and

replace missing or damaged labels.

Information is also available from:

Technical Support Nuremberg

Tel: +49 (0) 180 5050 222

Fax: +49 (0) 180 5050 223

Email: techsupport@ad.siemens.de

Monday to Friday: 7:00 am to 5:00 pm (local time)

Internet Home Address

Customers can access technical and general information at:

http://www.siemens.de/micromaster

Contact address

Should any questions or problems arise while reading this manual, please contact

the Siemens office concerned using the form provided at the back this manual.

Definitions and Warnings Issue 12/02

MICROMASTER 440 Operating Instructions

6 6SE6400-5AW00-0BP0

Definitions and Warnings

DANGER

indicates an immiently hazardous situation which, if not avoided, will result in

death or serious injury.

WARNING

indicates a potentially hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION

used with the safety alert symbol indicates a potentially hazardous situationwhich,

if not avoided, may result in minor or moderate injury.

CAUTION

used without safety alert symbol indicates a potentially hzardous situation which, if

not avoided, may result in a property demage.

NOTICE

indicates a potential situation which, if not avoided, may result in an undesireable

result or state.

NOTE

For the purpose of this documentation, "Note" indicates important information

relating to the product or highlights part of the documentation for special

attention.

Qualified personnel

For the purpose of this Instruction Manual and product labels, a "Qualified

person" is someone who is familiar with the installation, mounting, start-up and

operation of the equipment and the hazards involved.

He or she must have the following qualifications:

1. Trained and authorized to energize, de-energize, clear, ground and tag

circuits and equipment in accordance with established safety procedures.

2. Trained in the proper care and use of protective equipment in accordance

with established safety procedures.

3. Trained in rendering first aid.

PE = Ground

♦ PE – Protective Earth uses circuit protective conductors sized for short circuits

where the voltage will not rise in excess of 50 Volts. This connection is

normally used to ground the inverter.

♦ - Is the ground connection where the reference voltage can be the same

as the Earth voltage. This connection is normally used to ground the motor.

Use for intended purpose only

The equipment may be used only for the application stated in the manual and only

in conjunction with devices and components recommended and authorized by

Siemens.

Issue 12/02 Safety Instructions

MICROMASTER 440 Operating Instructions

6SE6400-5AW00-0BP0 7

Safety Instructions

The following Warnings, Cautions and Notes are provided for your safety and as a

means of preventing damage to the product or components in the machines

connected. This section lists Warnings, Cautions and Notes, which apply generally

when handling MICROMASTER 440 Inverters, classified as General, Transport &

Storage, Commissioning, Operation, Repair and Dismantling & Disposal.

Specific Warnings, Cautions and Notes that apply to particular activities are

listed at the beginning of the relevant chapters and are repeated or supplemented

at critical points throughout these sections.

Please read the information carefully, since it is provided for your personal

safety and will also help prolong the service life of your MICROMASTER 440

Inverter and the equipment you connect to it.

General

WARNING

♦ This equipment contains dangerous voltages and controls potentially

dangerous rotating mechanical parts. Non-compliance with Warnings or

failure to follow the instructions contained in this manual can result in loss of

life, severe personal injury or serious damage to property.

♦ Only suitable qualified personnel should work on this equipment, and only

after becoming familiar with all safety notices, installation, operation and

maintenance procedures contained in this manual. The successful and safe

operation of this equipment is dependent upon its proper handling,

installation, operation and maintenance.

♦ Risk of electric shock. The DC link capacitors remain charged for five minutes

after power has been removed. It is not permissible to open the

equipment until 5 minutes after the power has been removed.

♦ HP ratings are based on the Siemens 1LA motors and are given for

guidance only; they do not necessarily comply with UL or NEMA HP

ratings.

CAUTION

♦ Children and the general public must be prevented from accessing or

approaching the equipment!

♦ This equipment may only be used for the purpose specified by the

manufacturer. Unauthorized modifications and the use of spare parts and

accessories that are not sold or recommended by the manufacturer of the

equipment can cause fires, electric shocks and injuries.

Safety Instructions Issue 12/02

MICROMASTER 440 Operating Instructions

8 6SE6400-5AW00-0BP0

NOTICE

♦ Keep these operating instructions within easy reach of the equipment and

make them available to all users

♦ Whenever measuring or testing has to be performed on live equipment, the

regulations of Safety Code BGV A2 must be observed, in particular §8

“Permissible Deviations when Working on Live Parts”. Suitable electronic

tools should be used.

♦ Before installing and commissioning, please read these safety instructions

and warnings carefully and all the warning labels attached to the equipment.

Make sure that the warning labels are kept in a legible condition and replace

missing or damaged labels.

Transport & Storage

WARNING

♦ Correct transport, storage, erection and mounting, as well as careful

operation and maintenance are essential for proper and safe operation of the

equipment.

CAUTION

♦ Protect the inverter against physical shocks and vibration during transport and

storage. Also be sure to protect it against water (rainfall) and excessive

temperatures (see tableTable 7-1 on page 106).

Commissioning

WARNING

♦ Work on the device/system by unqualified personnel or failure to comply with

warnings can result in severe personal injury or serious damage to material.

Only suitably qualified personnel trained in the setup, installation,

commissioning and operation of the product should carry out work on the

device/system.

♦ Only permanently-wired input power connections are allowed. This equipment

must be grounded (IEC 536 Class 1, NEC and other applicable standards).

♦ Only type B ELCBs should be used with FSA to FSF. Machines with a three-

phase power supply, fitted with EMC filters, must not be connected to a

supply via an ELCB (Earth Leakage Circuit-Breaker - see DIN VDE 0160,

section 5.5.2 and EN50178 section 5.2.11.1).

♦ The following terminals can carry dangerous voltages even if the inverter is

inoperative:

- the power supply terminals L/L1, N/L2, L3 resp. U1/L1, V1/L2, W1/L3

- the motor terminals U, V, W resp. U2/T1, V2/T2, W2/T3

- and depending on the Frame Size, the terminals DC+/B+, DC-, B-, DC/R+

resp. C/L+, D/L-

♦ This equipment must not be used as an ‘emergency stop mechanism’ (see

EN 60204, 9.2.5.4)

CAUTION

The connection of power, motor and control cables to the inverter must be carried

out as shown in Figure 2-13 on page 40, to prevent inductive and capacitive

interference from affecting the correct functioning of the inverter.

Issue 12/02 Safety Instructions

MICROMASTER 440 Operating Instructions

6SE6400-5AW00-0BP0 9

Operation

WARNING

♦ MICROMASTERS operate at high voltages.

♦ When operating electrical devices, it is impossible to avoid applying

hazardous voltages to certain parts of the equipment.

♦ Emergency Stop facilities according to EN 60204 IEC 204 (VDE 0113) must

remain operative in all operating modes of the control equipment. Any

disengagement of the Emergency Stop facility must not lead to uncontrolled

or undefined restart.

♦ Wherever faults occurring in the control equipment can lead to substantial

material damage or even grievous bodily injury (i.e. potentially dangerous

faults), additional external precautions must be taken or facilities provided to

ensure or enforce safe operation, even when a fault occurs (e.g. independent

limit switches, mechanical interlocks, etc.).

♦ Certain parameter settings may cause the inverter to restart automatically

after an input power failure.

♦ Motor parameters must be accurately configured for motor overload

protection to operate correctly.

♦ This equipment is capable of providing internal motor overload protection in

accordance with UL508C section 42. Refer to P0610 and P0335, i2t is ON by

default. Motor overload protection can also be provided using an external

PTC (disabled by default P0601).

♦ This equipment is suitable for use in a circuit capable of delivering not more

than 10,000 symmetrical amperes (rms), for a maximum voltage of 230 V /

460 V / 575 V when protected by a H or K type fuse (see Tables starting on

page 109).

♦ This equipment must not be used as an ‘emergency stop mechanism’ (see

EN 60204, 9.2.5.4)

Repair

WARNING

♦ Repairs on equipment may only be carried out by Siemens Service, by

repair centers authorized by Siemens or by authorized personnel who are

thoroughly acquainted with all the warnings and operating procedures

contained in this manual.

♦ Any defective parts or components must be replaced using parts contained in

the relevant spare parts list.

♦ Disconnect the power supply before opening the equipment for access

Dismantling & Disposal

CAUTION

♦ The inverter’s packaging is re-usable. Retain the packaging for future use.

♦ Easy-to-release screw and snap connectors allow you to break the unit down

into its component parts. You can then re-cycle these component parts,

dispose of them in accordance with local requirements or return them to

the manufacturer.

Safety Instructions Issue 12/02

MICROMASTER 440 Operating Instructions

10 6SE6400-5AW00-0BP0

Autres manuels pour MICROMASTER 440

Table des matières

Autres manuels Siemens Entraînement CC

Siemens

Siemens SINAMICS DCM Manuel utilisateur

Siemens

Siemens SINAMICS SL150 Manuel utilisateur

Siemens

Siemens SED2 Series Guide de l'utilisateur

Siemens

Siemens SINAMICS GL150 Mode d'emploi

Siemens

Siemens 6RA70 Series Manuel utilisateur

Siemens

Siemens SINAMICS PERFECT HARMONY GH150 6SL3826 Manuel utilisateur

Siemens

Siemens MICROMASTER 440 GX Caractéristiques techniques

Siemens

Siemens SINAMICS GM150 Manuel utilisateur

Siemens

Siemens BT300 LonWorks Manuel utilisateur

Siemens

Siemens SIMATIC FM 453 Manuel utilisateur

Siemens

Siemens Simovert 6SE70 Series Manuel utilisateur

Siemens

Siemens SINAMICS S120 Manuel utilisateur

Siemens

Siemens SINAMICS S120 Document technique

Siemens

Siemens SIMOGEAR BA 2030 Manuel utilisateur

Siemens

Siemens SINAMICS SM150 Manuel utilisateur

Siemens

Siemens SINAMICS S110 Manuel de la liste des pièces

Siemens

Siemens SIDOOR AT40 Guide de l'utilisateur

Siemens

Siemens SED2 VFD Manuel d'installation

Siemens

Siemens CP 342-5 Manuel utilisateur

Siemens

Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Manuel utilisateur

Siemens

Siemens SIDOOR AT18 Manuel utilisateur

Siemens

Siemens SINUMERIK 810D Manuel d'installation et d'exploitation

Siemens

Siemens SINAMICS G120P Manuel utilisateur

Siemens

Siemens SINAMICS G130 Manuel utilisateur

Manuels Entraînement CC populaires d'autres marques

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manuel utilisateur

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manuel de la liste des pièces

Chamberlain Garog

Chamberlain Garog D Series Manuel utilisateur

Parker

Parker PDS Series Manuel utilisateur

Festo

Festo DGC G Series Guide de configuration

Binks

Binks QS-5012-1-CE Manuel utilisateur

Danfoss

Danfoss VLT 2800 Series Fiche technique

ABB

ABB ACQ580-01 Series Manuel d'installation

YASKAWA

YASKAWA CANopen SI-S3 Manuel utilisateur

GE D20A6 Manuel utilisateur

Unex

Unex MC-D-250-1000-050W-TW Manuel utilisateur

Geckodrive

Geckodrive G213V Manuel utilisateur

ABB

ABB RSYC-01 Manuel utilisateur

Rockwell Automation

Rockwell Automation PowerFlex 700S Manuel du propriétaire

WEG

WEG DeviceNet CFW500 Manuel utilisateur

SOMFY

SOMFY JR RU 30 Manuel utilisateur

Beckhoff

Beckhoff AX8911 Manuel de l'opérateur

Minarik

Minarik MM300 Series Manuel utilisateur