Siemens AR50M-MF Manuel utilisateur

Mullion Reader

User Manual

Document ID: A-100417-b

Edition date: 15.04.2019

Data and design subject to change without notice. / Supply subject to availability.

We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights and

undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our prior

express written authorization, nor to use it for any purpose other than for which it was delivered to him.

MIFARE and MIFARE Classic are trademarks of NXP B.V.

MIFARE DESFire are registered trademarks of NXP B.V. and are used under license.

Hereby, Siemens Switzerland Ltd. declares that this equipment type is in compliance with the following EU Directives for CE marking:

• Directive 2014/30/EU (Electromagnetic Compatibility Directive)

• Directive 2014/53/EU (Radio Equipment Directive)

• Directive 2011/65/EU (Restriction of the use of certain hazardous substances Directive)

The full text of the EU declaration of conformity is available at: http://van.fyi?Link=DoC

SV &

http://van.fyi?Link=Mullion_Reader

Table of Contents

1 Introduction 5

2 Technical data 6

2.1 FCC statements 7

3 Safety regulations 8

4 Reader components and package contents 9

4.1 Reader components 9

4.2 Package contents 9

5 Mounting and connecting 10

5.1 Mounting a reader 10

5.2 Mounting a reader with cables fed from the side 11

5.3 Connecting the cables 13

5.3.1 Connecting the reader in OSDP mode 13

5.3.2 Connecting the reader in Wiegand mode 14

5.4 Setting the Jumpers 16

5.5 Setting the Jumpers for OSDP 16

5.6 Setting the Jumpers for Wiegand 17

5.7 Reverse mode Wiegand 19

5.8 Programming a reader for reverse mode transmission 20

5.8.1 Reverting to standard mode Wiegand 20

5.9 Programming a Reverse mode transmission reader for 26 Bit Wiegand 20

5.9.1 Re-programming a reverse mode transmission reader away from 26 Bit Wiegand 21

5.10 Default Configuration Card 21

5.10.1 37 Bit Wiegand. 21

6 Closing the reader 22

7 Disassembling the reader 23

7.1 To disassemble the reader: 23

7.2 To remove the terminal block: 24

8 Default settings 25

8.1 3CT Tool 25

8.2 Setting burst mode using the keypad 26

9 Connecting the reader to SiPass integrated 27

9.1 Connecting the reader to SiPass integrated in OSDP mode 27

9.2 Setting OSDP address for the reader 28

9.3 Connecting the reader to SiPass integrated in Wiegand mode 28

10 Connecting the reader to ACT 29

10.1 Connecting the reader to ACT in OSDP mode 29

10.2 Setting the OSDP address for the reader 30

10.3 Connecting the reader to ACT in Wiegand mode 32

11 Connecting the reader to SPC 33

1 Introduction

The VR20M-MFand AR50M-MF are mullion-mount card readers with modern anti-hacking security over

OSDP and support for the traditional Wiegand protocol. When installed as part of a secure system over

OSDP, the communication from the reader or the controller they are connected to cannot be

compromised. The readers are made of hard wearing materials and will endure most weather conditions.

The readers are easy to mount and can be mounted on a flat surface. The readers can be cleaned with

most kinds of domestic detergents. All readers have a multicolour light frame. The AR50M-MF has a

keypad for PIN code.

15.04.2019

2 Technical data

AR20M-MF AR50M-MF

Protocol OSDP or Wiegand OSDP or Wiegand

Interface to controller RS485 or Wiegand RS485 or Wiegand

Operating voltage 8.5 – 30.0VDC 8.5 – 30.0VDC

Power consumption DC 12V 50mA Peak 150mA

DC 24V 35mA Peak 100mA

DC 12V 50mA Peak 150mA

DC 24V 35mA Peak 100mA

Tamper protection Yes Yes

Card technology MIFARETM MIFARE

Card compatibility

MIFARE Classic

MIFARE Plus

MIFARE DESFire EV1/ EV2

MIFARE Classic

MIFARE Plus

MIFARE DESFire EV1/ EV2

Reading distance

MIFARE Classic-up to 6 cm

MIFARE Plus-up to 6 cm

MIFARE DESfire EV1/ EV2-the

card must be held to the reader

MIFARE Classic-up to 6 cm

MIFARE Plus-up to 6 cm

MIFARE DESfire EV1/ EV2-the

card must be held to the reader

Indicators

3 x LED (red/yellow/green)

1 x Buzzer

Multicolour light frame

3 x LED (red/yellow/green)

1 x Buzzer

Multicolour light frame

Keypad No Yes

Operating temperature - 40°C to + 70°C - 40°C to + 70°C

IP rating IP55 IP55

IK class 08 08

Housing Zinc cast metal bezel with

polycarbonate plastic front

Zinc cast metal bezel with

polycarbonate plastic front

Color Black, matt chrome Black, matt chrome

Dimensions (WxHxD) mm Surface mounted: 48 x 129 x 22 Surface mounted: 48 x 129 x 24

15.04.2019

Cable length guide

OSDP Max. 8 readers Max. 1 km Belden cable

Wiegand Max. 4 readers Max. 30m copper cable (0.5 mm)

2.1 FCC statements

Model No. AR20M-MF AR50M-MF

FCC ID 2AHDLMULL 2AHDLMULL

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could

void the User`s authority to operate the equipment.

Mullion Reader – User Manual Technical data

15.04.2019

3 Safety regulations

General

lFollow all warnings and instructions marked on the device.

lKeep this document for reference purposes.

lPlease consider any additional country-specific, local laws, safety standards, or regulations

concerning installation, operation, and disposal of the product.

Liability claim

lDo not make any changes or modifications to the device.

lUse only spare parts and accessories that have been approved by the manufacturer.

15.04.2019

4 Reader components and package contents

The following diagrams identify the reader components and the items that come packaged with the reader.

4.1 Reader components

1Front 6Location where cables can come through the

back

2Knockouts x 2 7Tamper base

3Base 8Screw for tamper protection

4Gasket 9Mounting holes

5Hook 10 Upper and lower terminal block locations

4.2 Package contents

1+ - B A terminal block for OSDP and Wiegand (lower terminal block)

2R Y/T G H terminal block for Wiegand (upper terminal block)

3Mounting/Tamper screws

4Cover screw

5Opening tool

15.04.2019

5 Mounting and connecting

The mullion readers are surface-mounted readers. The readers can be mounted with cables led through the

back of the unit or led in from either side through knockout gaps.

For wiring details please refer to:

lConnecting the cables on page13.

5.1 Mounting a reader

To ensure a close fit, mount the reader on a flat surface.

To attach the base to a surface:

1. Make a small hole in the back of the base gasket (item1 in the diagram below). Use this hole to feed

the cable through the gasket and into the reader base.

2. Attach the base to the wall with three screws: one in the middle at the top of the base, and one in

each of the corners at the bottom of the base.

1Cable entry through base gasket

2Tamper screw

3Tamper base

3. If tamper protection is required, fix the screw (item 3) into the tamper base (item 2).

Do not over tighten the screw as this can damage the tamper base.

4. Continue to follow the instructions detailed in Connecting the cables on page13.

15.04.2019

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Siemens Lecteur de cartes

Siemens

Siemens AR6181-MX Instructions d'utilisation et d'entretien

Siemens

Siemens SIMATIC RF310M Manuel utilisateur

Siemens

Siemens SIMATIC RF1070R Manuel utilisateur

Siemens

Siemens SIMATIC MV440 Manuel utilisateur

Siemens

Siemens Bewator PR500 Manuel d'installation et d'exploitation

Siemens

Siemens AR6181-MS Manuel utilisateur

Siemens

Siemens SIMATIC RF650M Manuel utilisateur

Siemens

Siemens PR500-Cotag Manuel utilisateur

Siemens

Siemens AR6111-MX Manuel utilisateur

Siemens

Siemens RB500 Manuel utilisateur

Siemens

Siemens 6FL7171-8AD Manuel utilisateur

Siemens

Siemens AR10S-MF Manuel d'instructions d'installation

Siemens

Siemens AR4 S-MF Series Manuel d'instructions d'installation

Siemens

Siemens SC7 Manuel d'installation et d'exploitation

Siemens

Siemens PM500-Cotag Manuel utilisateur

Siemens

Siemens SIMATIC RF300 Guide de l'utilisateur

Manuels Lecteur de cartes populaires d'autres marques

Lindy

Lindy 43185 Manuel utilisateur

Lindy

Lindy 43185 Manuel utilisateur

ViziT

ViziT RD-4F Manuel utilisateur

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuel utilisateur

AVID ID

AVID ID AVID1043 Manuel utilisateur

Conrad

Conrad PCMCIA Manuel utilisateur

Rosslare

Rosslare DR-6255 Manuel utilisateur

Lindy

Lindy 51541 Manuel utilisateur

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuel utilisateur

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuel utilisateur

ACS

ACS ACR122L Manuel utilisateur

Secukey

Secukey S2-MF Manuel utilisateur

Elecom

Elecom MR-SMC07 series Manuel utilisateur

Alien

Alien ALR-9800 Manuel utilisateur

ACS

ACS ACR310 Manuel utilisateur

Datamars

Datamars R-IN1300 MID Manuel utilisateur

Alarm Lock

Alarm Lock AL-PRE2 Manuel utilisateur

xpr

xpr B100PROX-AH Guide de l'utilisateur