SICK RFU61 Series Manuel utilisateur

OPERATING INSTRUCTIONS

RFU61x IO-Link

RFID read/write device (UHF)

Described product

RFU610-107xx

Manufacturer

SICK AG

Erwin-Sick-Str. 1

79183 Waldkirch

Germany

Legal information

This work is protected by copyright. Any rights derived from the copyright shall be

reserved for SICK AG. Reproduction of this document or parts of this document is

only permissible within the limits of the legal determination of Copyright Law. Any modi‐

fication, abridgment or translation of this document is prohibited without the express

written permission of SICK AG.

The trademarks stated in this document are the property of their respective owner.

Original document

This document is an original document of SICK AG.

Conformities

Due to the country-specific approvals for the devices (country variants), the respective

conformities are type-dependent. For the current device see:

•Type-specific Technische Information Regulatory Compliance Information (printed

version enclosed with the device) or

•Type-specific online data sheet on the Internet at: www.sick.com/RFU61x

The type designation of your device can be found on the type label.

2O P E R A T I N G I N S T R U C T I O N S | RFU61x IO-Link 8026854//2021-09-01 | SICK

Subject to change without notice

Contents

1 About this document........................................................................ 5

1.1 Information on the operating instructions.............................................. 5

1.2 Scope......................................................................................................... 5

1.3 Explanation of symbols............................................................................ 6

1.4 Further information................................................................................... 7

1.5 Complementary software......................................................................... 7

2 Safety information............................................................................ 8

2.1 Intended use............................................................................................. 8

2.2 Improper use............................................................................................. 9

2.3 Cybersecurity............................................................................................ 9

2.4 Limitation of liability................................................................................. 9

2.5 Modifications and conversions................................................................ 9

2.6 Requirements for skilled persons and operating personnel.................. 10

2.7 Operational safety and particular hazards.............................................. 11

3 Product description........................................................................... 13

3.1 Product ID.................................................................................................. 13

3.2 Product characteristics............................................................................ 15

4 Transport and storage....................................................................... 22

4.1 Transport................................................................................................... 22

4.2 Unpacking.................................................................................................. 22

4.3 Transport inspection................................................................................. 22

4.4 Storage...................................................................................................... 22

5 Mounting............................................................................................. 24

5.1 Overview of mounting procedure............................................................. 24

5.2 Preparation for mounting......................................................................... 24

5.3 Mounting location..................................................................................... 26

5.4 Mounting the device................................................................................. 27

5.5 Mounting external components............................................................... 28

6 Electrical installation........................................................................ 29

6.1 Safety......................................................................................................... 29

6.2 Pin assignments of electrical connections............................................. 32

6.3 Instructions for electrical installation when the ambient temperature

can fall below 0 °C................................................................................... 34

7 Commissioning.................................................................................. 36

7.1 Overview of the commissioning steps..................................................... 36

8 Operation............................................................................................ 38

8.1 Operating options..................................................................................... 38

8.2 Status indicators....................................................................................... 38

CONTENTS

8026854//2021-09-01 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU61x IO-Link 3

Subject to change without notice

8.3 Operation via IO-Link................................................................................ 39

9 Maintenance...................................................................................... 43

9.1 Maintenance plan..................................................................................... 43

9.2 Cleaning..................................................................................................... 43

10 Troubleshooting................................................................................. 44

10.1 Overview of Potential Errors and Faults.................................................. 44

10.2 Detailed fault analysis.............................................................................. 44

10.3 Repairs...................................................................................................... 44

10.4 Returns...................................................................................................... 44

10.5 Replacing the device................................................................................ 45

11 Decommissioning............................................................................. 46

11.1 Disposal..................................................................................................... 46

12 Technical data.................................................................................... 47

12.1 Features.................................................................................................... 47

12.2 Interfaces.................................................................................................. 47

12.3 Mechanics and electronics...................................................................... 48

12.4 Ambient data............................................................................................. 49

12.5 Working range diagram............................................................................ 49

12.6 Dimensional drawing................................................................................ 49

13 Accessories........................................................................................ 50

14 Annex.................................................................................................. 51

14.1 Declarations of conformity and certificates............................................ 51

14.2 Copyright notices...................................................................................... 51

14.3 Abbreviations used................................................................................... 51

CONTENTS

4O P E R A T I N G I N S T R U C T I O N S | RFU61x IO-Link 8026854//2021-09-01 | SICK

Subject to change without notice

1 About this document

1.1 Information on the operating instructions

These operating instructions provide important information on how to use devices from

SICK AG.

Prerequisites for safe work are:

•Compliance with all safety notes and handling instructions supplied.

•Compliance with local work safety regulations and general safety regulations for

device applications

The operating instructions are intended to be used by qualified personnel and electrical

specialists.

NOTE

Read these operating instructions carefully to familiarize yourself with the device and its

functions before commencing any work.

The operating instructions are an integral part of the product. Store the instructions

in the immediate vicinity of the device so they remain accessible to staff at all times.

Should the device be passed on to a third party, these operating instructions should be

handed over with it.

These operating instructions do not provide information on operating the machine or

system in which the device is integrated. Information on this can be found in the

operating instructions for the machine or system.

1.2 Scope

The documentation concept for the device includes the following publications:

•Safety Notes

•Technical Information RFU61x Regulatory Compliance Information

•Operating instructions

•Technical Information RFU610-107xx IODD for RFU61x IO-Link

The publications are valid for all country variants of the product.

The publications fulfill the following functions:

The Safety Notes provide information about:

•Safe handling of the device

•Online access to the operating instructions and other documentation

The Technical Information RFU61x Regulatory Compliance Information lists:

•Regionally-approved country variants of the RFU61x PoE and the RFU61x IO-Link

•Conformities fulfilled

•Any country-specific operating conditions for the devices that need to be observed

The Safety Notes and the Technical Information RFU61x Regulatory Compliance Infor‐

mation is printed out and enclosed with the device at the time of delivery.

Operating instructions

•These operating instructions serve to incorporate the device into a customer sys‐

tem.

You can download the operating instructions as a PDF from the product page on the

Internet:

•www.sick.com/RFU61x

ABOUT THIS DOCUMENT 1

8026854//2021-09-01 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU61x IO-Link 5

Subject to change without notice

The RFU61x Technical Information Regulatory Compliance Information can also be

downloaded there as a PDF if required.

The operating instructions present the following topics:

•Interpreting the type code

•Overview of product features and functions of the device

•Scope of delivery of the device: Enclosed components, required online access to

additional components

•Operation of the device in an ambient temperature range below 0 °C: Measures

and requirements for mounting and electrical installation

•Overview of all interfaces and connection options for the device

•Wiring of the interfaces of the device

•Functions of the status displays

•Overview of operating options and available configuration tools for the device

•Measures for eliminating interference

Step-by-step procedures are given for all required actions in the operating instructions.

The operating instructions describe the commissioning on the device.

Commissioning is based on the basic parameter setting of the device. Reading one

transponder on an object serves as the basis for the simple application.

Functions specific to special devices are, where necessary, described in additional

documents.

More detailed information for identification of the available device type see "Type code",

page 14.

RFU610-107xx IODD Technical Information

•The type-specific IODD technical information lists the available parameters and

functions of the device in the parameterization and process data. This document

assists the user when setting up the device for demonstration of operative use.

•You can download the IODD technical information as a PDF from the product page

on the Internet: www.sick.com/RFU61x

Available country variants and, if applicable, device variants, information on regionally-

specific radio approvals, fulfilled conformities as well as certificates are also listed on

the product page on the Internet at:

•www.sick.com/RFU61x

1.3 Explanation of symbols

Warnings and important information in this document are labeled with symbols. Sig‐

nal words introduce the instructions and indicate the extent of the hazard. To avoid

accidents, damage, and personal injury, always comply with the instructions and act

carefully.

DANGER

… indicates a situation of imminent danger, which will lead to a fatality or serious

injuries if not prevented.

WARNING

… indicates a potentially dangerous situation, which may lead to a fatality or serious

injuries if not prevented.

1 ABOUT THIS DOCUMENT

6O P E R A T I N G I N S T R U C T I O N S | RFU61x IO-Link 8026854//2021-09-01 | SICK

Subject to change without notice

CAUTION

… indicates a potentially dangerous situation, which may lead to minor/slight injuries if

not prevented.

NOTICE

… indicates a potentially harmful situation, which may lead to material damage if not

prevented.

NOTE

… highlights useful tips and recommendations as well as information for efficient and

trouble-free operation.

1.4 Further information

NOTE

Further documentation for the device can be found on the online product page at:

•www.sick.com/RFU61x

There, additional information has been provided depending on the product, such as:

•Model-specific online data sheets for device types, containing technical data,

dimensional drawing, and specification diagrams

•Declarations of conformity and certificates of the product family

•Dimensional drawings and 3D CAD dimension models of the device types in

various electronic formats

•Regulatory Compliance Information Technical Information

•Other publications related to the devices described here

•Publications dealing with accessories

1.5 Complementary software

NOTE

In the SICK Support Portal (supportportal.sick.com, registration required) you will find,

besides useful service and support information for your product, further detailed infor‐

mation on the available accessories and their use.

You can download the following programs here:

•Function blocks for commonly used controllers (PLC)

ABOUT THIS DOCUMENT 1

8026854//2021-09-01 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU61x IO-Link 7

Subject to change without notice

2 Safety information

2.1 Intended use

The RFU61x IO-Link RFID read/write device is an intelligent ID sensor from the RFU6xx

(UHF) product family. Version (working range): Short Range

The stationary device automatically identifies wireless-based data cards (transponders)

on stationary and moving objects. The device supports data card management.

The compact device has an (internal) antenna integrated in the housing. The RFU610

base model processes the data of all common passive transponders according to

ISO/IEC 18000-63 and EPCglobal UHF C1G2 in the regional UHF carrier frequency

range.

The device is used in a control system with coordinating PLC. To do so, the device is

integrated into the fieldbus system of the control system with the help of an IO-Link

master. The PLC controls the read and write tasks of the device using the process data.

The device is primarily designed for use in industrial and logistics areas. The device

meets the applicable requirements for industrial robustness, interfaces and data proc‐

essing.

Country variants of the device refer to the radio-technical region assignment, see

Technical Information Regulatory Compliance Information.

Intended use of the device also includes compliance with all information in:

•Safety notes

•RFU61x Technical Information Regulatory Compliance Information

•Operating instructions

•IODD RFU610-107xx Technical Information

SICK AG assumes no liability for losses or damage arising from the use of the product,

either directly or indirectly. This applies in particular to use of the product that does not

conform to its intended purpose and is not described in this documentation.

2.1.1 Operational restrictions

The frequency band of the device is configured for the specific type and region when

delivered. This enables the device to be operated in the respective approved region

without interfering with national protected frequencies (such as mobile communica‐

tions).

A region consists either of a group of countries or of only one country.

Operating the device in another region, however, can interfere with protected frequen‐

cies there.

NOTE

The device approval was granted for a specific region. The region assignment cannot be

changed.

•Use the device only in the region and country for which the device is approved.

Observe country-specific operating conditions for the device, see Technical Infor‐

mation RFU61x Regulatory Compliance Information.

•When reselling the device, inform the buyer of the fixed region assignment.

•When passing the device on to third parties, also include the Safety Notes,

the Technical Information Regulatory Compliance Information and the operating

instructions.

•Safety Notes and Technical Information Regulatory Compliance Information are

printed and enclosed with the device.

2 SAFETY INFORMATION

8O P E R A T I N G I N S T R U C T I O N S | RFU61x IO-Link 8026854//2021-09-01 | SICK

Subject to change without notice

You can also find the Technical Information Regulatory Compliance Information and the

operating instructions as a PDF on the Internet at:

•www.sick.com/RFU61x

2.2 Improper use

Any use outside of the stated areas, in particular use outside of the technical specifica‐

tions and the requirements for intended use, will be deemed to be incorrect use.

•The device does not constitute a safety component in accordance with the respec‐

tive applicable safety standards for machines.

•The device must not be used in explosion-hazardous areas, in corrosive environ‐

ments or under extreme environmental conditions.

•Any use of accessories not specifically approved by SICK AG is at your own risk.

WARNING

Danger due to improper use!

Any improper use can result in dangerous situations.

Therefore, observe the following information:

■Product should be used only in accordance with its intended use.

■All information in these operating instructions must be strictly observed.

■Shut down the product immediately in case of damage.

2.3 Cybersecurity

To protect against cybersecurity threats, it is necessary to continuously monitor and

maintain a comprehensive and holistic cybersecurity concept. A suitable concept com‐

prises organizational, technical, procedural, electronic, and physical levels of defense

and provides suitable measures for different types of risks. SICK's products and solu‐

tions must be viewed as a component of this concept.

Information on Cybersecurity can be found at: www.sick.com/psirt .

2.4 Limitation of liability

Relevant standards and regulations, the latest technological developments, and our

many years of knowledge and experience have all been taken into account when

compiling the data and information contained in these operating instructions. The

manufacturer accepts no liability for damage caused by:

■Non-adherence to the product documentation (e.g., operating instructions)

■Incorrect use

■Use of untrained staff

■Unauthorized conversions or repair

■Technical modifications

■Use of unauthorized spare parts, consumables, and accessories

2.5 Modifications and conversions

NOTICE

Modifications and conversions to the device may result in unforeseeable dangers.

Interrupting or modifying the device or SICK software will invalidate any warranty claims

against SICK AG. This applies in particular to opening the housing, even as part of

mounting and electrical installation.

SAFETY INFORMATION 2

8026854//2021-09-01 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU61x IO-Link 9

Subject to change without notice

2.5.1 Conditions for specified enclosure rating

To ensure compliance with the specified IP67 enclosure rating of the device, the follow‐

ing requirements must be met. If these requirements are not met, the device does not

fulfill any specified enclosure rating.

•The side cover of the memory card slot must be placed on and screwed tight to the

device. Recommended tightening torque for the cover screws: 30 Ncm ± 5 Ncm.

•The cables plugged into the electrical M12 and M8 connections must be screwed

tight.

•The M8 connection, which may not be used, is sealed with a tightly screwed

protective element, e.g. a protective cap (as delivered).

The same also applies to the EMC requirement (ESD) according to CE.

NOTICE

The type label on the lower side of the device contains a pressure equalizing membrane

attached in the middle. If the type label is damaged or removed, the leak tightness of

the device can no longer be guaranteed.

Positions of the individual elements see "Device view", page 15

2.5.1.1 Exception: temporarily opening the cover on the device

NOTICE

Risk of damage to the product when the cover is open

In open state, the device does not conform to a specified enclosure rating.

If necessary, only operate the device for a short time with an open cover for the

activities listed in the following: During this time, protect the device against moisture

and dust.

Temporarily open the cover for the following activities:

•Insert or remove the optional storage medium (SD card) for data logging or firm‐

ware update

For this purpose, open the corresponding side cover on the device.

For further warranty provisions, see the General Terms and Conditions of SICK AG, e.g.

on the delivery note of the device.

2.6 Requirements for skilled persons and operating personnel

WARNING

Risk of injury due to insufficient training.

Improper handling of the device may result in considerable personal injury and material

damage.

■All work must only ever be carried out by the stipulated persons.

This product documentation refers to the following qualification requirements for the

various activities associated with the device:

2 SAFETY INFORMATION

10 O P E R A T I N G I N S T R U C T I O N S | RFU61x IO-Link 8026854//2021-09-01 | SICK

Subject to change without notice

Autres manuels pour RFU61 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SICK Système RFID

SICK

SICK RFU6 Series Manuel

SICK

SICK RFU62 Series Manuel utilisateur

SICK

SICK RFH5 Series Manuel utilisateur

SICK

SICK RFU61x IO-Link Manuel utilisateur

SICK

SICK RFH620 Manuel utilisateur

Manuels Système RFID populaires d'autres marques

Chainway

Chainway R1 Manuel utilisateur

IFM

IFM DTC600 Manuel utilisateur

Elatec

Elatec TWN4 MULTITECH NANO LEGIC 63 M Manuel utilisateur

RHOMBUS

RHOMBUS DR20 Manuel utilisateur

Sirit

Sirit IDentity 6204 Manuel utilisateur

SOREX

SOREX FLEX Manuel utilisateur

Omron

Omron V780-HMD68-EIP-KR Manuel utilisateur

IDENTEC SOLUTIONS

IDENTEC SOLUTIONS iPOINT Si Instructions d'utilisation

Shuttle

Shuttle BR06 Instructions d'utilisation

Digilock

Digilock Curve Keypad Basic Manuel utilisateur

Atid

Atid AT870 Manuel utilisateur

Chacon

Chacon 34958 Manuel utilisateur

Paxton

Paxton PROXIMITY architectural reader Manuel utilisateur

CipherLab

CipherLab 1800 series Manuel utilisateur

Brady

Brady FR22 Manuel utilisateur

Kronotech

Kronotech BLUEBOX GEN2 M30 UHF Manuel utilisateur

Unitech

Unitech RH767 Manuel utilisateur

Honeywell

Honeywell 026366.00 Manuel utilisateur