SHIVAUDYO Point Zero Manuel utilisateur
1
User Manual
Point Zero
S.C. Shivaudyo S.R.L.
Address: Calea Mosilor 199, Bucharest, Romania
e-mail:[email protected]
Internet: www.shivaudyo.com
2
Shivaudyo S.R.L. provides this document to its customers with a product purchase to
use in the product operation. Content of this document is copyright protected and any
reproduction of the whole or any part is strictly prohibited, except with the written
authorization from Shivaudyo.
All technical information in this document is for reference purposes only.
Please register your serial number on the webpage below in order to get full warranty
coverage and receive information by e-mail about upgrades and product news for your
Shivaudyo Point Zero.
Carefully following the instructions in this manual will ensure that your loudspeaker
system will give you many years of reliable and trouble-free operation.
3
Contents
Chapter
Page
Introduction
4
Safety information
5
WEEE Compliance
7
Intended use
7
Loudspeaker layout
8
Quick start
10
Installation
10
Software configuration
11
Operation
18
Measurements
21
Technical Data Sheet
23
Warranty
24
Troubleshooting
25
4
Introduction
Dear Valued Customer,
Congratulations, you have purchased high quality active monitor loudspeaker, which
can be used for mastering your songs, Atmos and home cinema implementation or
high-end home use.
Please read the safety instructions before installing or operating the loudspeaker.
Included in the box (for a pair of loudspeakers):
•Two active loudspeakers –each in one box;
•Power cord –two pieces;
•USB cable –one piece;
•USB stick with software (for Windows only) –one piece;
•Quick install guide;
•User Manual;
•Rubber feet –set of 4 pieces (one set for each loudspeaker).
Included in the box (for an Atmos Pack set –11 loudspeakers)
•Eleven active loudspeakers –each in one box;
•Power cord –11 pieces;
•USB cable –2 pieces;
•USB stick with software (for Windows only) –1 piece;
•Quick install guide;
•User Manual;
•Rubber feet –set of 4 pieces (one set for each loudspeaker);
•Mounting kit –2 pieces
5
Safety information
This product operates at mains voltage and carries hazardous voltages at accessible
parts. These parts may never be exposed to inadvertent touch.
Damage due to inappropriate handling is not covered by warranty. This product has no
user-serviceable parts.
Do not replace faulty components with commercial components. Although they may
look similar, the components used by Shivaudyo are custom made.
Warning: To reduce the risk of fire or electric shock, do not expose this device to rain or
moisture.
Attention: Observe precautions for handling electrostatic sensitive devices. This module
uses semiconductors that can be damaged by electrostatic discharge (ESD).
The lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure, that may be of significant magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user of the
presence of important operating and maintaining (servicing) instructions in the literature
accompanying the appliance.
This product must be earthed.
Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til
stikproppens jord.
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Apparatet må tilkoples jordet stikkontakt.
Apparaten skall anslutas till jordat uttag.
Service or modifications by any person or persons other than by Shivaudyo authorized
personnel voids the warranty.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
6
Do not use this apparatus near water.
Clean only with a dry cloth.
Natural convection should not be impeded by covering the product (apart from the end
applications housing). Do not block any ventilation openings. Install in accordance with
the Shivaudyo instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the protective earth/grounding mains inlet.
Protective earth is provided for your safety.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the Shivaudyo.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to Shivaudyo support. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
This apparatus shall not be exposed to dripping or splashing, and no object filled with
liquids, such as vases or beer glasses, shall be placed on the apparatus.
Do not overload wall outlets and extension cords as this can result in a risk of fire or
electric shock.
This apparatus must be connected to a mains socket outlet with a protective earthen
connection.
This apparatus has been equipped with a rocker-style AC mains power switch. This
switch is located on the rear panel and should remain readily accessible to the user.
The MAINS plug or an appliance coupler is used as the disconnect device, so the
disconnect device shall remain readily operable.
Do not run any cables across the top or the bottom of the product. Apply fixtures to
cables to ensure that this is not compromised.
Before using this product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, do not use the product.
Changes or modifications not expressly approved by Shivaudyo will void compliance
and therefore the user's authority to operate the equipment.
7
WEEE Compliance
This product complies with Directive 2012/19/EU of the European Parliament and of the
Council of 4 July 2012 on waste electrical and electronic equipment (WEEE). It is
marked with the following symbol:
Intended use
The Point Zero active loudspeaker is used in professional audio, home cinema and hi-fi
applications. The amplifier within the loudspeaker enclosure is ideally matched to the
individual drivers, eliminating the need for each amplifier channel to operate in the entire
audio band pass.
It is used with an external computer software or external device.
Use for self-testing is excluded.
8
Loudspeaker Layout
Before you start
Special care has been taken in the packaging of your Shivaudyo Products.
Back plate layout
1
Balanced analogue input & output (XLR)
2
Balanced Digital input & output (AES/EBU)
3
Unbalanced analogue input & output (RCA)
4
Mini USB
5
LED indicators and preset button
6
Digital input (Optical Toslink)
7
Unbalanced digital input & output (S/PDIF)
8
IEC power socket
9
ON/OFF switch
8
9
9
Front plate layout
1
Tweeter mounted in waveguide
2
Acoustic center of the speaker
3
Mid-woofer
4
Display + Remote sensor
1
2
3
4
10
Quick start
We recommend that you spend some time setting up your monitoring speaker system.
Setting up naturally takes a certain amount of time. However, in case you need to get
started quickly, please follow the quick set up guide. The rest of this manual will assist
you in setting up your loudspeaker system and calibrate it according to your listening
environment.
Connect the power cable into the IEC socket. Turn the power switch to ON. The Display
on the front panel will now illuminate. If no audio signal is present at the input for more
than 15 minutes the speaker will automatically go into standby mode.
Connect the audio source from your mixer, preamplifier or other equipment to the one
input connector at the rear.
Set the loudspeaker level at reasonable low level from Remote control or from software
with USB cable included.
Normal operating conditions will cause the red led to flash occasionally on peaks. We
draw your attention to the fact that this loudspeaker can produce pressure levels which
may be harmful. Shivaudyo declines all responsibility for eventual hearing loss caused
by the use of our loudspeakers.
Installation
Positioning
Shivaudyo loudspeakers are calibrated to give a flat response under anechoic room.
The acoustic environment will inevitably influence the overall performances of the
loudspeakers.
When using the loudspeaker in a typical room, the Roll-Off control allows the low
frequency response to be tailored according to the position of the loudspeaker. Placing
a speaker in a corner or near a wall will affect the bass response and this can be
compensated by the use of the calibration controller.
Table des matières
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur