Shire Pixie Manuel utilisateur
These instructions are for your safety. Please read through them thoroughly before use .
PLEASE KEEP THIS LEAFLET FOR FUTURE REFERENCE
All information, contained in this booklet © Shire Garden Buildings .
Version 1 01/09/2016 Julian Shepherd
Complies with EN71
© Pixie Playhouse
Let’s
get started...
GB
IE
Important information...
Safety 03
Base and positioning 04
Warranty 04
Care maintenance & Recycling 05
In more detail...
Hardware Chart & Fascia bag 06-07
Stacked Parts List 08-09
Detailed Technical Drawings 10-11
12 Before you start
Assembly instructions 13-28
customerservice@shiregb.co.uk
Brigstock Road Wisbech Cambridgeshire PE13 3JJ
Tel 01945 465 295
F Pour obtenir un exemplaire des instructions ou une copie dans une autre
langue s'il vous plaît envoyez un e-mail ou écrire à l'adresse ci-dessous.
PL Na kopii instrukcji lub kopii w innym języku prosimy o wysłanie maila
lub pisać na adres podany poniżej.
RUS
Для получения копии инструкции или копия на другом языке,
пожалуйста, отправьте по электронной почте или написать по
указанному ниже адресу.
TR Başka bir dilde talimatları veya bir kopyasını bir kopyası için bir e-posta
gönderebilir veya aşağıdaki adrese yazınız.
EN For a copy of the instructions or a copy in another language please send
an email or write to the address below.
02
Getting Started…..
GB
IE
03
Check that you have noted all the following instructions
Safety
We advise the use of non slip protective gloves throughout
the assembly process.
We advise the use of steel capped protective footwear
throughout the assembly process
We advise the use of protective headwear and safety
goggles throughout the assembly process
Where a ladder is in use another person must hold the
ladder.
Do not attempt to work in windy conditions
We advise the use of a scaffold tower when fitting the roof ,
for felting or if you cannot reach from the ground.
Do not allow children near the tools and work area
Follow any safety precautions quoted by the manufacturer
for any equipment you use
Check all parts before assembly
Only use child and animal safe wood preservative
Do not use creosote
Allow the wood preservative to fully dry before use
Regularly check the building for wear and tear
Children must be supervised at all times while playing with
this playhouse
Not suitable for children under 3 years old.
EVERY PRECAUTION IS TAKEN TO ENSURE THAT YOUR BUILDING HAS NO ELEMENT
INCORRECTLY PLACED OR POSSIBLY HAZARDOUS, HOWEVER PRIOR TO USE
PLEASE CHECK ALL SURFACES FOR THE FOLLOWING:
(1) (1) RAISED GRAIN, SPLINTERS: Sand down timber to smooth finish
(2) (2) NAIL/SCREW/PIN HEADS PROUD: Tap home to be flush with surface of timber
(3) (3) DAMAGED SCREW HEADS RESULTING IN SHARP SPLINTERS OF METAL: Replace
(4) (4) SHARP ENDS OF NAILS/ SCREWS/ PINS PROTRUDING THROUGH THE PANEL: Re-
move and reposition.
(5) (5) ENSURE ALL PARTS ARE SECURED AGAINST REASONABLE FORCE: Remove and refit
(6) (6) ENSURE THERE ARE NO LOOSE PARTS: Remove and refit/discard
Important!
IMPORTANT ! For your safety please
read carefully the safety warnings
Getting Started…..
GB
IE Base and Warranty
The following are also excluded
Damage resulting from poor assembly
Poor treatment application
Poor care and maintenance
Changes to the design
Misuse
General wear and tear
Warranty...
10 Year anti rot warranty subject to the following -
The building must be raised so it is not in contact with any water
retaining base surface (for example grass).
This can be achieved using a timber, concrete or slab base
When using a concrete or slab base use damp proofing strips
under the bearers
The building must have been completely treated and sealed
immediately prior to or after assembly
The building must have been re-treated and re-sealed annually
If your building has been pressure treated or has any pressure treated
parts additional treatment need not be applied (except for aesthetic
purposes )
Wood is a natural product and therefore the following are excluded
from the warranty
Colour changes
Warping
Splitting
Preparation of base...
We recommend that the base onto which your building will stand should be at least
75mm larger in each direction than the total floor size of the building.
Actual floor area of the building: 1790 x 1190mm (excluding canopy)(1681with rails)
Roof Size: 1953mm x1759mm
Total height clearance: 1569mm
The chosen position in your garden for your building should be excavated to a depth
of 75mm to allow a base of sand, on to which paving slabs can be evenly laid.
You may also use an adjustable timber base or a concrete base. Whatever base you
decide upon IT MUST BE LEVEL AND FIRM.
04
The 5 golden rules of care
Care, Maintenance and Recycling
The 7 golden rules of maintenance
Recycling and disposal
1. Pallet and timber widely recycled
2. Cardboard widely recycled
3. Plastic strapping subject to local regulations
4. Plastic sheeting subject to local regulations
1. Timber widely recycled
2. Metal fixings widely recycled
3. Glass widely recycled
4. Roofing felt not currently recycled
packaging
Building
(1) Ensure your base is level and firm
(2) Ensure the building is not sitting directly on the ground using damp proof
membrane or the optional timber base.
(3) Ensure every piece of timber and surface, especially that is hidden upon
assembly is treated with a top quality wood preservative at least twice (see
note on pressure treated buildings in warranty section). Turn the panels
upside down whilst painting so the treatment runs into the seams.
(4) Garden buildings are not waterproof, therefore we recommend you seal
between all the panels with a silicone based sealant .
(5) Regularly check your roofing felt for weather damage and leaks
(1) Re apply the timber treatment annually. (see note on pressure treated
buildings in warranty section)
(2) Visually check for weather damage
(3) Check and replace if necessary any Silicone sealant if used on your
building.
(4) Check the roofing material for wear
(5) The doors and windows may require periodical adjustment
(6) Ensure your building is well ventilated especially during hot weather
(7) During extremely hot periods humidify your building to prevent the timber
from drying out .
05
Getting Started…..
GB
IE
Fascia & nail bag contents
06
Hardware Chart
Scale 1:1
(A0034) x01
45mmPosi-drive screw
45
(A0031 ) x04
(A0032) x71
25mm Posi-drive screw
Posi-drive screw
Black 25mm
(A0026) x03
60mm Round head nail
(A0027) x04
Posi-drive screw
12mm Flat head
(A0035) x28
60mmPosi-drive screw
(A0024) x112
16mm Panel Pin
(A0025) x80
40mmRound head nail
12
8
(A0266) x106
8mmFelt Nail
Note
4x12mm screws in
roller catch pack
07
Fascia & nail bag contents
(part No ) qty
Description
Stacked parts list
(part No ) qty
Description
08
09
These instructions are for your safety.
Please read through them thoroughly
before starting .
Read any supplements before assembly.
Treat all the parts before assembly
see page 5
Keep all children and pets away from
the work area.
Tools ladders and partially assembled
buildings are very hazardous.
10
In more detail…..
GB
IE
Table des matières
Autres manuels Shire Équipements de jeux et d'aires de jeux
Shire
Shire Bunny/Playhut Platform Manuel utilisateur
Shire
Shire Command post Manuel utilisateur
Shire
Shire Completed Stork Manuel utilisateur
Shire
Shire Loft Manuel utilisateur
Shire
Shire Lookout Playhouse Manuel utilisateur
Shire
Shire Maxi Funny Exposure Manuel utilisateur
Shire
Shire Bunny Manuel utilisateur
Shire
Shire Kitty Playhouse Manuel utilisateur
Shire
Shire Platform For Stork Manuel utilisateur
Shire
Shire Play Hut Manuel utilisateur
Manuels Équipements de jeux et d'aires de jeux populaires d'autres marques
Ledon
Ledon 302040 Manuel utilisateur
FUNormous
FUNormous Disney Junior MICKEY MOUSE Manuel utilisateur
b4Adventure
b4Adventure Slackers TREEZONE ADVENTURE THREE HOUSE Manuel utilisateur
PoolMaster
PoolMaster 72775 Manuel utilisateur
Palmako
Palmako 4743142009857 Manuel de l'installateur
BOERPLAY
BOERPLAY PSTE000.019 Manuel utilisateur
