Sheng Jay Automation Technologies SJ-K10 Manuel utilisateur
1
2
Content
Preface ............................................................................. 3
Product............................................................................. 4
Product Introduction ....................................................... 5
Feature............................................................................. 5
Precaution........................................................................ 8
Package .......................................................................... 16
Specification................................................................... 17
3
Preface
Thank you for using our product.
Please read and fully understand content within this manual before
you use product。
Warranty Service and Responsibility
The incorrect installation or utilization could cause damage
to device or user. We shall not be liable for result 、
incidental damages or other losses that incurred by user in
relation with user's mistake to obey the information and
instructions contained herein.
The product is designed to record, store, play and analyzes
videos caused by impacts but we do not guarantee the
product records every event without missing. Furthermore,
If the impact is too weak, the vibration sensor may not be
able to detect the impact, which induces that the system
will be unable to automatically start recording the video file.
The information within this manual may change without
notice due to technical changes or upgrades.
4
Product
5
Product Introduction
The K 10 is designed to record, store, play and analyzes
videos and voice inside the vehicle when vehicle is driving.
The main purpose of K10 is to clarify the responsibility for
the accident
Feature
1. Auto Recording；
Start recoding data when turn on the
vehicle. Stop recording while vehicle is
turned off then saves last file to SD card.
2. High quality 2.4’LCD
The high quality 2.4’LCD can let you view
recorded data in anytime.
3. G-Sensor
Saves and analyzes data after get impacted. System
analyzes impacted data then show on PC to display to
6
impact‘s direction, and strength.
4. Loop Recording
Continue recording to keep updating newest
data. For example, if SD card is full, the
system erases oldest file, and save new
file to instead of oldest one.
5. Support2-32GB SDHC SD card；
Use 16GB SD card can record 8 hours data recording.
After SD is full, overwrite old file to SD.
1H
2H
4H
8H
Recording Time
2GB
4GB
8GB
16GB
START
STOP
Memory
16H
32GB
7
6. Super capacitor
It is safer than the lithium battery.
Save the last file after vehicle is turned
off.
7. Zoom
Zoom in or out to get clear image.
8. HD Quality Record
HD 1280x720 pixel，FPS 30
Bring you back to the scene.
9. MPEG/MP4 Format
No need to install new software. The
recorded data can be played in various
video player program such as Gretech
Online Movie Player，Daum potplayer, KM
Player.
8
Precaution
For your safety, please observe all the terms
that stated in the precautions. For failure
to comply with the precaution instruction
causes any problem, we assume no
responsibility.
Format SD cards by product before use it.
If product is malfunction, please format
SD card first then try it again
Do not dry the product by using heaters
such as warm oven or microwave oven. It
may cause an explosion or lead to product
failure and deformation; Do not use
chemical cleaning agents (such as benzene,
solvents, alcohol, etc.), which may lead
to fires. If the above conditions occur,
we assume no responsibility.
Avoid product operates in wet
environments, and do not disassemble and
9
shock the product. If products damaged
due to human factors, the maintenance fee
will be charged.
Do not operate the product while driving.
Please pull over the car before you
operate the product.
Install product at proper location which
not hinder driving.
In case of poor lighting conditions,
please turn on the headlight to get better
quality of video
Please keep the lens and windshield clean.
If other objects are placed around the
camera, they may be reflected on the
window and included in the video images.
Please do not leave unnecessary objects
around the device.
Use authorized SD card, un-authorized SD
may result data lost. Do not eject SD card
while the product is turned on. Must turn
10
off the product before insert SD card.
Product erases oldest file, and saves new
file to instead of oldest one, so backup
your data frequently to keep your data safe.
Product takes ten seconds to boot up,
please be patient.
Caution：If user does not comply with the
precautions, may cause product damaged.
Table des matières
Autres manuels Sheng Jay Automation Technologies DVR
Sheng Jay Automation Technologies
Sheng Jay Automation Technologies AK54 Pro Manuel utilisateur
Sheng Jay Automation Technologies
Sheng Jay Automation Technologies K12-Pro Manuel utilisateur
Sheng Jay Automation Technologies
Sheng Jay Automation Technologies SJ-KV204 Manuel utilisateur
Sheng Jay Automation Technologies
Sheng Jay Automation Technologies SJ-V21 Manuel utilisateur
