Shelolab SRI21D Manuel utilisateur

DIURNAL PLANT GROWTH CHAMBER

115 Voltage

Installation - Operation Manual

SRI21D

2 | Page

Not for Fly Cultivation

This unit is not designed to hold fruit flies (Drosophila melanogaster). Use with flies voids the

manufacturing warranty and risks damaging the unit.

Other incubator models in the SRI family are manufactured specifically for fly applications. Talk to

your distributor or customer service representative to identify a model compatible with your study or

production model.

3 | Page

SRI21D DIURNAL PLANT GROWTH CHAMBER

115 Voltage

Installation and Operation Manual

Part Number (Manual): 4861744

Revision: February 12, 2018

These units are compliant with the following standards for use within an ambient air pressure range

of 22.14 – 31.3 inHg (75 – 106 kPa), with no flammable, volatile, or combustible materials being

heated.

CAN/CSA C22.2 No. 61010-1:2012

CAN/CSA C22.2 No. 61010-2-010:2004 Reaffirmed: 2014-07

UL 61010-1:2012-05

UL 61010A-2-010:2002-03

EN 61010-1:2010

EN 61010-2-010:2014

Supplemented by: UL 61010-2-010:2015

4 | Page

TABLE OF CONTENTS

INTRODUCTION ........................................................................................................................................................ 5

Read this Manual....................................................................................................................................................................5

Safety Considerations and Requirements ......................................................................................................................5

Contacting Assistance ..........................................................................................................................................................6

Engineering Improvements..................................................................................................................................................6

Temperature Reference Sensor Device .......................................................................................................................... 7

RECEIVING YOUR UNIT ........................................................................................................................................... 9

Inspect the Shipment.............................................................................................................................................................9

Orientation Photo ................................................................................................................................................................. 10

Recording Data Plate Information.................................................................................................................................... 11

INSTALLATION .........................................................................................................................................................13

Installation Checklist ........................................................................................................................................................... 13

Required Ambient Conditions........................................................................................................................................... 14

Environmental Disruption Sources .................................................................................................................................. 14

Power Source Requirements ............................................................................................................................................ 15

Lifting and Handling ............................................................................................................................................................ 15

Install the Chamber in Location ....................................................................................................................................... 16

Leveling................................................................................................................................................................................... 16

Attach the Chamber Door Handle .................................................................................................................................. 16

Adjust Shelves........................................................................................................................................................................17

Deionized and Distilled Water.......................................................................................................................................... 18

Installation Cleaning and Disinfection ........................................................................................................................... 18

GRAPHIC SYMBOLS ................................................................................................................................................19

CONTROL PANEL OVERVIEW ...............................................................................................................................21

OPERATION.............................................................................................................................................................. 23

Theory of Operation ........................................................................................................................................................... 23

Put the Chamber into Operation..................................................................................................................................... 25

Set the Manual Day Mode Temperature Set Point ................................................................................................... 26

Set the Manual Night Mode Temperature Set Point................................................................................................. 29

Program Clock Times and Cycle Temperature Set Points...................................................................................... 32

Load the Chamber .............................................................................................................................................................. 38

Condensation and the Dew Point .................................................................................................................................. 38

Launching the Day - Night Cycle .................................................................................................................................... 39

Accessory Compatibility and Power Outlet ................................................................................................................. 39

Set the Over Temperature Limit...................................................................................................................................... 40

USER MAINTENANCE..............................................................................................................................................41

Cleaning and Disinfecting.................................................................................................................................................. 41

Minimizing Contamination Exposure ............................................................................................................................. 42

Electrical Components....................................................................................................................................................... 42

Refrigeration and Defrosting............................................................................................................................................ 43

Diagnostics - Temperature Issues.................................................................................................................................. 59

UNIT SPECIFICATIONS .......................................................................................................................................... 67

Weight......................................................................................................................................................................................67

Dimensions.............................................................................................................................................................................67

Capacity ..................................................................................................................................................................................67

Max Shelves For Unit ......................................................................................................................................................... 68

Shelf Capacity by Weight.................................................................................................................................................. 68

Temperature ......................................................................................................................................................................... 68

Power...................................................................................................................................................................................... 68

PARTS AND CONSUMABLES................................................................................................................................ 69

5 | Page

INTRODUCTION

Thank you for purchasing a SHEL LAB unit. We know you have many choices in today’s competitive

marketplace when it comes to constant temperature equipment. We appreciate you choosing ours. We

stand behind our products and will be here for you if you need us.

READ THIS MANUAL

Failure to follow the guidelines and instructions in this user manual may create a protection

impairment by disabling or interfering with the unit safety features. This can result in injury or death.

Before using the unit, read the manual in its entirety to understand how to install, operate, and

maintain the unit in a safe manner. Keep this manual available for use by all operators. Ensure all

operators are given appropriate training before the unit begins service.

SAFETY CONSIDERATIONS AND REQUIREMENTS

Follow basic safety precautions, including all national laws, regulations, and local ordinances in your

area regarding the use of this unit. If you have any questions about local requirements, please

contact the appropriate agencies.

SOPs

Because of the range of potential applications, this unit can be used for, the operator or their

supervisors must draw up a site-specific standard operating procedure (SOP) covering each

application and associated safety guidelines. This SOP must be written and available to all operators

in a language they understand.

Intended Applications and Locations

The incubators are intended for constant temperature, non-humidified general incubation

applications in professional, industrial, and educational environments. The units are not intended for

use at hazardous or household locations.

Power

Your unit and its recommended accessories are designed and tested to meet strict safety

requirements.

•The unit is designed to connect to a power source using the specific power cord type

shipped with the unit.

•Always plug the unit power cord into a protective earth grounded electrical outlet

conforming to national and local electrical codes. If the unit is not grounded properly, parts

such as knobs and controls can conduct electricity and cause serious injury.

•Do not bend the power cord excessively, step on it, or place heavy objects on it.

•A damaged cord can be a shock or fire hazard. Never use a power cord if it is damaged or

altered in any way.

•Use only approved accessories. Do not modify system components. Any alterations or

modifications to your unit not explicitly authorized by the manufacturer can be dangerous

and will void your warranty.

6 | Page

INTRODUCTION

CONTACTING ASSISTANCE

Phone hours for Sheldon Technical Support are 6 am – 4:30 pm Pacific Coast Time (west coast of

the United States, UTC -8), Monday – Friday. Please have the following information ready when

calling or emailing Technical Support: the model number and the serial number (see page 11).

EMAIL: [email protected]

PHONE: 1-800-322-4897 extension 4, or (503) 640-3000

FAX: (503) 640-1366

Sheldon Manufacturing, INC.

P.O. Box 627

Cornelius, OR 97113

ENGINEERING IMPROVEMENTS

Sheldon Manufacturing continually improves all of its products. As a result, engineering changes and

improvements are made from time to time. Therefore, some changes, modifications, and

improvements may not be covered in this manual. If your unit’s operating characteristics or

appearance differs from those described in this manual, please contact your SHEL LAB dealer or

customer service representative for assistance.

7 | Page

INTRODUCTION

TEMPERATURE REFERENCE SENSOR DEVICE

Must be purchased separately

A reference sensor device is required for calibrating the incubator temperature display.

Reference devices must meet the following standards:

•Accurate to at least 0.1°C

The device should be regularly calibrated, preferably by a third party.

Temperature Probe

Use a digital device with a wire thermocouple probe that can be introduced into the incubation chamber

through the unit access port. Select a thermocouple suitable for the application temperature you will be

calibrating at.

Why a Probe?

Reference readings taken outside the chamber using wire temperature probes avoid chamber door

openings. Openings disrupt the chamber temperature. Each disruption requires a minimum 1-hour wait

to allow the atmosphere to re-stabilize before continuing.

No Alcohol or Mercury Thermometers

Alcohol thermometers do not have sufficient accuracy to conducti accurate temperature calibrations.

Never place a mercury thermometer in the incubation chamber! Always use thermocouple probes.

Temperature Reference

8 | Page

INTRODUCTION

9 | Page

RECEIVING YOUR UNIT

INSPECT THE SHIPMENT

•When a unit leaves the factory, safe delivery becomes the responsibility of the carrier.

•Damage sustained during transit is not covered by the manufacturing defect warranty.

When you receive your unit, inspect it for concealed loss or damage to its interior and exterior. If you

find any damage to the unit, follow the carrier’s procedure for claiming damage or loss.

1. Carefully inspect the shipping carton for damage.

2. Report any damage to the carrier service that delivered the unit.

3. If the carton is not damaged, open the carton and remove the contents.

4. The unit should come with an Installation and Operation Manual.

5. Verify that the correct number of accessories has been included.

o4 shelves

o1 chamber door key

o1 Chamber door handle with installation instructions

10 | Page

Figure

1: SRI21D

RECEIVING YOUR UNIT

ORIENTATION PHOTO

Control Panel

Temperature Probe

Wire Shelf,

1 of 4

Chamber Door

Cultivation

Chamber

Door Gasket

Day Period

Fluorescent

Illumination Blubs

Table des matières

Autres manuels shelolab Accessoires

shelolab

shelolab SMI1E Guide de démarrage rapide

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur

shelolab SRI21D Manuel utilisateur

Manuels Accessoires populaires d'autres marques