Shell SH924 Manuel utilisateur

User Guide
SH924
Jump Starter
Portable Power
ITM. / ART. 1593176

1. Light Switch 2. LED Light 3. ON/OFF Switch
4. DC Input Port 5. USB Output Port 6. LED Battery Level Indicator
7. Jumper Cable Indicator 8. Magnetic Base
Negative Battery Clamp (Black)Positive Battery Clamp (Red)
Smart Jumper Cable
For Your Safety
Thank you for choosing this Shell product. Please read the following
instructions and keep them for future reference. This instruction manual
contains important information on safe operation and use. To ensure
long life and performance reliability, please operate and maintain as
per the instructions on this sheet.
3
6
8
74
5
Jump Starter
1
2
Product Details

• 1 x Jump Starter • 1 x AC/DC Adaptor
•1 x USB A to Micro USB Cable • 1 x User Guide
Package Includes
Product Features
• Designed for vehicles with 11.0 L gasoline and 8.0 L diesel engines
• 8 levels of safety protection
• Powerful magnetic base allows hands free use
• Integrated LED light with 3 light settings: White Floodlight,
SOS, Red Alert Strobe
• 1 x Product Warranty Registration
1

IMPORTANT! CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH
USE AND EVERY THREE MONTHS, OR WHEN THE BATTERY LEVEL
FALLS BELOW 50%, TO PROLONG THE INTERNAL BATTERY LIFE.
1. Connect the DC Terminal of the
included adaptor to the input port of the
jump starter.
2. Connect the input terminal of the
adaptor to an external AC outlet.
3. The LED battery level indicators start
flashing. (Please refer to the following
table for charging status)
4. When charging is completed,
the LED indicator will stop flashing.
5. Disconnect the adaptor from the outlet
and remove the charging cable from
the jump starter.
Charging the Jump Starter
Battery Level Indicator Chart
Operating Instructions
The jump starter is intended to jump start vehicle with gasoline/diesel
engine using a 12V battery.
Jump Starting Vehicle
Before connecting to the battery
1
LED Status
(● ON O OFF)
100%
fully charged
75% - 100%50% - 75%25% - 50%0% - 25%
Power Status
1. Verify the voltage of the battery. The information
can be found in the vehicle's owner's manual.
2. Make sure the power loads such as headlamps,
air-conditioning and radio are turned off.
3. Press the switch to check the internal battery
level to ensure that there is sufficient battery
capacity to jump start a vehicle. (Refer to the
following table for more information)

2. A) Once clamps are properly connected, the green LED jumper cable
indicator will turn solid from flashing. You may now try to start your vehicle.
B) Otherwise please refer to the following jump start troubleshooting
table for corresponding solutions.
1. Connect the red battery clamp to the positive (+) terminal and the black
battery clamp to the negative (-) terminal on your vehicle’s battery.
Note: Required capacity to jump start a vehicle
1
3. After the engine starts, disconnect the battery clamps from the battery
terminals.
LED Battery
Level Indicator Battery Capacity Indications
Best condition to jump start
a vehicle
The minimum capacity
required to jump start a vehicle
Recharge the jump starter
before use
75% - 100%
50% - 75%
25% - 50%
0% - 25%
Connecting to the vehicle battery

Troubleshooting Table
Jumper Cable Indicator
Cause Solutions
Solid Off
Off Flashing
Flashing Flashing
Off
Green Red
LED Light
(front)
Jump start the vehicle
Low battery
protection
Reverse polarity
protection/
short-circuit
protection
Clamps are not
connected to the
battery
Reverse charge
protection
Please charge the
jump starter
On
On
Flashing Off Off
Off
Off
Flashing (4 times
per second, cycle
after 1 second
interval)
OnOn
On
Over-temperature
protection
Jump started 4
consecutive times
within 10 minutes
Disconnect the clamps from
the vehicle’s battery. Let the
jump starter cool down by
putting it in a cool and
ventilated place.
Disconnect the clamps from
the vehicle’s battery. Follow
jump starting vehicle
instructions to jump start the
vehicle.
The car battery voltage is
higher than the voltage of the
starting power supply.
Please check the voltage of
the vehicle's battery; it may
be greater than 12V.
Do not jump start more than
4 times.
Disconnect the clamps from
the vehicle’s battery. Unplug
the jumper cable from the
jump starter.
Consult a mechanic.
Disconnect and reconnect
the clamps to the battery
1

1. Connect your portable device with one end of the included USB
cable, and insert the other end to the output port of the jump starter.
2. Press the power switch to turn on the jump starter and start charging.
Charging will begin as soon as the jump starter turns on.
3. Once the charging is completed, disconnect your portable device
and unplug the USB cable from the jump starter.
Compatible with: smart phones, tablets, digital cameras, mobile
gaming devices, wireless earphones and more
Charging Portable Devices
Note: Charging time will vary depending on the portable device and
the device's battery capacity.

1. To switch on the LED light, press and hold
on the ON/OFF switch for 2 seconds.
2. Press the ON/OFF switch to toggle through 3 lighting modes:
3. Press and hold ON/OFF switch for 2 seconds
under any lighting mode to turn off the LED
light
.
Using the LED Light
White Floodlight SOS Red Alert Strobe

The symbol indicates direct current (DC)
Specifications
Jump Starter
Start Voltage: 12V
Start Current: 1000A
Peak Current: 2000A
Input: 18V 1A
USB Output: 5V 2.1A
Battery Type: Lithium-Polymer
Battery Capacity: 24000mAh, 88.8Wh
Operating Temperature: - 20ºC ~ 60ºC
Storage Temperature: - 20ºC ~ 40ºC
Charging Temperature: 0ºC ~ 45ºC
Dimensions: 4.72 x 5.24 x 10.24 inches/120 x 133 x 260 mm
Weight: 3.66 lb/1660 g (without adapter and USB cable)
Adapter
Input: 100 - 240V ~ 50/60Hz 0.6A Max
Output: 18V 1A

Safety Instructions
Failure to follow the instructions may cause serious injury, death or
property damage
Risk of electric shock, explosion and fire
Risk of explosive gases
• Do not attempt to jump start your vehicle more than four consecutive times. If
the vehicle does not start after four consecutive attempts, consult a mechanic.
• The product may become warm under extended high-power operation.
• Do not disassemble, modify or repair this product.
• Do not destroy product by crushing or cutting.
• Do not expose the product to fire, rain, snow, sunlight and heat.
• Keep this product away from water and other liquids.
• Keep this product in a dry place. Do not allow the product to get wet.
• Use the product in a well-ventilated area. Do not operate in explosive
atmospheres such as areas of flammable gas, dust and liquid.
• Do not use this product in the event of electrolytic liquid leaks, strange odours,
overheating, color change or when any other peculiar occurrence is detected.
• Handle the product with care. Do not use the product when it is damaged. Do
not operate with damaged jumper cable or clamps.
• Clean this product only with a dry cloth. Avoid using cleaning product with
rough or chemical substances.
• Do not look directly into the light as it may cause serious eye injuries.
• This car jump starter is for use with gasoline or diesel engine vehicles using a
12V battery only. The use of this jump starter on a vehicle that does not have a
12V battery may cause serious damage to the vehicle, the jump starter, and/or
serious injury to the user. Refer to the owner's manual of the vehicle for the
battery voltage.
• The product should not be charged while in contact with flammable material
like textiles.
• When charging the jump starter, use the USB cable and car charger/adapter
that are provided in the package (accessories included in the package vary
depending on the model). When using a different USB cable, charger, or
adapter, make sure it is certified according to the safety standards in your
country/region.
• Use the accessories that are provided in the package. Shell is not responsible
for any damage or injury when using accessories that are not provided by us.
• Do not put the jump starter directly above the vehicle battery during jump
starting.
• Do not jump start a vehicle while recharging the internal battery.
• Do not allow the clamps to touch each other.
• Keep out of reach of children.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Shell Démarreur à distance


















