Shell SR-3B Manuel utilisateur
Table of contents
2
Shell
RIDE
Explanation of symbols 3
Introduction 4
Delivery contents 4
Intended use 5
Important safety instructions 5
Technical specifications 7
General information 8
Unboxing and assembly 9
Control and charging functions 13
Battery Usage 14
Before using your e-bike 16
Getting started 17
Display Functions 18
Storage, maintenance and cleaning 24
Manufacturer’s Limited Warranty 26
Canadian Limited Warranty 30
Customer service 34
Disposal instructions 35
Certifications 35
Trademark 36
Explanation of symbols
Contains important information for avoiding injuries.
Contains important information for preventing damage to the product.
Draws your attention to important information and notes when reading the
instruction manual.
Shell
RIDE 3
Thank you for purchasing the Shell SR-3B e-bike!
Please read the instruction manual carefully before operating the e-bike, and ensure that the
e-bike is used properly and in accordance with the instructions.
Retain this instruction manual for future reference. Only give the SR-3B e-bike to third
parties in conjunction with the instruction manual. Ensure any third party has completely read
and follows the SR-3B e-bike manual.
The instruction manual and illustrations within it may differ depending on the model.
We hope you enjoy safely using your Shell SR-3B e-bike
Delivery contents
Introduction
4
Shell
RIDE
User manual
SR-3B Electric Bike
AC Adapter
Battery Key Tools
The Shell SR-3B e-bike is a vehicle designed for one person for passenger transport.
The e-bike is exclusively for private use and is not suitable for commercial use.
Only use the e-bike as described in this instruction manual. Any other use is considered improper and
may result in material damage or even injury to people.
The manufacturer and distributor accept no liability for damage caused by unintended or improper use.
Important safety information
Intended use / Important
safety information
5
• Please strictly comply with the safety regulations stated in the manual. The manufacturer or distributor
cannot be held liable for any injury to persons, material damage, accidents or legal disputes resulting from
the violation of the safety regulations. Liability is always limited to the purchase value of the e-bike.
• The e-bike has been designed to transport one person with a maximum weight of 250 lbs.
• Please check your e-bike before every ride (see the “Storage, maintenance and cleaning” section).
• Do not use the e-bike if there is visible damage or if the power cord or plug is damaged.
• Modifying the e-bike is not permitted.
• Repairs may only be carried out by qualified personnel authorized by Shell or their distributors.
Liability and warranty claims are excluded if repairs are carried out independently or in the event
of improper connections or incorrect operation.
• Always wear a safety helmet, appropriate clothing, protective gear and flat-heeled shoes.
• Hold the handlebars with both hands while riding the e-bike.
Shell
RIDE
Important safety information
6
• Practice riding the e-bike on open and level terrain initially.
• Obey all local traffic laws and regulations. Do not ride where prohibited by local laws.
• The e-bike is suitable for use on flat, dry surfaces. Do not ride through water, during rain, at night
or in poor visibility.
• The e-bike is not suitable for performing stunts DO NOT TRY to jump it or perform any other
dangerous maneuvers.
• Do not leave the e-bike outdoors. Please store it in a dry, dark location.
• Before each ride, check that all screws are firmly tightened.
• Be careful not to touch any moving parts during the ride, in order to avoid injuries.
People who should not ride the e-bike include:
• Children under 14 years of age.
• If you under the influence of alcohol or drugs.
• If you have a problem with balance or motor skills that would interfere with their ability to
maintain balance.
• If your weight exceeds 250 lbs.
Shell
RIDE
Technical specifications
7
Shell
RIDE
Motor: Rear-wheel hub motor with 250-watt capacity
Battery: 36 V / 8.0 Ah lithium ion
Charging time: Approx. 3.2 hours
Brakes: Front and rear disc brakes
Features: LED display, reflectors
Dead weight: 38.0 lbs. (17.2 kg)
Maximum load: 250 lbs. (113.4 kg)
Maximum speed: 16.0 mph (25.75 km/h)
Maximum range: TBD
Tires: 27.5” pneumatic tube tires front and rear
Product size: L-42.0” x H-36.75” (L-107 cm x H-93 cm)
General information
8
Shell
RIDE
1 - Removable/Locking Battery
2 - Bell
3 - Brake lever (disc brake)
4 - Throttle/Display
5 - Electric brake
6 - Rear hub motor
7 - 27.5” wheels
8 - Charging port
9 - On/Off switch
10 - Kickstand
3
4
5
1
2
7
10
9
8
6
Unboxing and Assembly
9
Shell
RIDE
It is recommended that the bike be inspected and adjusted by a certified bicycle mechanic
before riding.
You Will Need:
4mm, 5mm and 6mm Allen wrench
13mm and 15mm open wrench
1- Carefully remove the bike from the box.
A. Use caution when opening the box as there may be staples exposed when opening the lid.
B. It is easier to clip the zip ties attaching the front wheel to the bike and remove the front wheel
from the box first.
C. Take out all the accessories and the box with pedals and other miscellaneous parts, and the
Battery Charger before removing the bike.
2- Remove all bubble wrap and other packaging materials and place them back into the box.
3- Tighten the seat-post into the seat-tube and hang the bike from a bike repair stand (if possible).
A. If you do not have a repair stand, place the bike on
the floor and engage the kickstand. Use caution as the
bike could tip over prior to install the front wheel, even
with the kickstand engaged.
Unboxing and Assembly
10
Shell
RIDE
4- Adjust the Seat
Your seat height is adjusted by a quick release. Pull the quick release
lever, Insert your seat post to at least the minimum insertion line
marked on the post. Tighten the adjusting nut by quick release lever,
then push the quick release lever to the closed position. The seat angle
is adjusted with the nuts that attach the seat to the seat rail. Ensure
that the nuts are tightened firmly and that the seat does not move
forward or back while you are sitting on it.
6- Aligning and tightening the handlebars
Using an allen key, loosen the 2 side bolts (B) and turn the
handlebar through 90 degrees. Adjust the tension of the
headset by turning bolt A if necessary but first release the
side bolts, adjust then re-tighten. Note that the you only need
to tighten the bolt A until the handlebar assembly and fork
have no free play, but so that the handlebar assembly and
fork can still freely turn left and right. If the wheel does not
move freely left to right the top cap bolt is too tight. If this is
the case turn the top cap bolt back some.
5- Adjustment of the seat post
The adjustment method is as follows :
Loose the hand release of the seat post, take out the seat post; Adjust the screw, Place the seat
post back in the frame tube as former station, and tighten the clamp of the seat position.
90°
Table des matières
