Shaw SDH-PSS Manuel utilisateur
Portable Sample System
For SDHmini Dewpoint Meters
Instrucon Manual
Issue 1
Contents
1
2
3
4
5
6
7
8
9
10
11
12
13
Introducon ................................................................................ 3
1.1 Unpacking Your Shaw Moisture Meters SDH-PSS ............................. 3
1.3 General Arrangement Example ........................................................ 4
Safety Informaon ...................................................................... 5
Quick Start Guide - Normal Operaon ......................................... 6
Purging the Instrument Before Taking a Sample .......................... 8
Disconnecon - Follow This Procedure Exactly .......................... 10
Filter Replacement (if ed) ..................................................... 11
Sampling Very Dry Gasses and/or at Very Low Pressure ............ 11
Cleaning the SDHmini Portable Sample System ......................... 11
Gases to Avoid .......................................................................... 12
Guarantee ................................................................................. 12
Instrument Schemac ............................................................... 13
Dimensions ............................................................................... 14
Specicaons ............................................................................ 14
1 Introducon
1.1 Unpacking Your Shaw Moisture Meters SDHmini Portable
Sample System (SDH-PSS)
1.2 General Descripon
3
4
manual.
1.3 General Arrangement Example*
SDHmini-Ex Dewpoint Meter
Instrument
Stainless Steel Chassis
Pressure
Regulator or
Stainless Steel Hose
2 Safety Informaon
2.1 Explanaon of Prohibion, Warning and Note Symbols Used
2.2 Pressure Exposure
DO NOT
WARNING
NOTE
!
i
3 Quick Start Guide - Normal Operaon
3.1 Installing the SDHmini into the Portable Sample System
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 1
Fig. 2
Fig. 3
Fig. 4
3.2 Connecng a Sample Line
Fig. 5
Fig. 6
Fig. 7Fig. 8
Fig. 5
Fig. 6
Fig. 7
Sample line to
inlet connecon.
Fig. 8
Quick connect
shown.
8
4 Purging the Instrument Before Taking a Sample
Fig. 9
pressure regulator
Fig. 10
litres per minute
Fig.
11
Fig. 12
Fig. 11
Switch on the
Fig. 13
Fig. 9
Fig. 10
Fig. 12
Fig. 11
Fig. 13
Fig. 14
Fig. 15
the sample gas.
Fig. 16
Fig. 17
Fig.
18
Fig. 14
Fig. 15
WARNING
Fig. 16
Fig. 17
Fig. 18
!
5 Disconnecon - Follow This Procedure Exactly
Fig. 19
Fig. 20
See secon 2.1 Fig. 3 and Fig. 4.
DO NOT
isolaon valve at the
DO NOT
pressure regulator or needle valve at this stage.
Doing so will retain pressure in the sample line.
Fig. 19
Fig. 20
Table des matières
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
