press “ENTER” to confirm or press “ ESC” to cancel.
Default
This function enables you to select different operations.
1. Press “up” or “down” to view other functions.
2. Press “ENTER” to enter, and press “up” or “down” to select nod.1 or nod.2, press
“ENTER” to confirm or press “ESC” to cancel.
Nod.1: (mode 1) normal channels control
Nod.2: (mode 2) a little channels control
3. While it operates on slave mode, it needs to be nod.1.
Test
This function enables you to performance the interior demo program without connecting
exterior console.
Press “up” or “down” to select other modes, and press “ENTER” to enter,
1. Nod 1 (Test mode 1),
Press “up” or “down” to select other modes, press “ENTER” to confirm, display “run” to
evaluate. Press “ESC” to quit.
2. Nod 2 (master control)
This function enables master to send signal to slave .Press “up” or “down” to select other
modes, and press “ENTER” to confirm. While displaying “on”, it means master send the signal,
otherwise, it displays “off”. Press “ENTER” to save, press “ESC” to cancel.
While it sets as “on”, you have to disconnect exterior DMX console and make sure no more
than two or above master on the public line.
Audi
This function enables sound to arouse test program.
1. Press “up” or “down” to view other functions.
2. Press “ENTER” to confirm, and press “up” or “down” to select “on” or “off”.
“On” means using sound controller, and “off” don’t.
r.Pan
This function enables horizontal movement or converse movement.
Press “ENTER” to confirm, and press “up” or “down”. If you need converse move, select “on”,
otherwise, select “off”. Press “ENTER” to save, or press “ESC” to quit.
r.Til
This function enables vertical movement or converse movement.
Press “ENTER” to confirm, and press “up” or “down”. If you need converse move, select “on”,
otherwise, select “off”. Press “ENTER” to save, or press “ESC” to quit.
r.set
This function enables the device to be the standard settings. Press “ENTER” to confirm.
3
