Sharp 29L-FG5RU Manuel utilisateur

OPERATION MANUAL

COLOUR TELEVISION

29L-FG5RU

Please read this operation manual

carefully before using the colour

television.

[ SAFETY

PRECAUTIONS ]

[ ACCESSORIES ]

[ ANTENNA

CONNECTION ]

• Connecting to an antenna

via a VCR

[ CONNECTING TO

OTHER EQUIPMENTS ]

[ CONNECTING AND

WATCHING DVD ]

• Connecting to a DVD

player

• Watching DVD

[ PART NAMES ]

• TV set

• Remote control

• Installing batteries

TINS-C440WJZZ

06P05-MSP

[ BASIC OPERATION ]

• Turn on the power

• On-screen display

language selection

• Channel selection

• Adjusting volume

[ CHANNEL SETTING ]

[ PICTURE OR SOUND

ADJUSTMENT ]

E10

[ TIMER SETTING ]

• On timer

• Off timer

• Reminder on-screen timer

• Beep reminder

E11

[ FEATURES ]

• Blue back

• Auto select

• Power save

• 16:9 mode

• Child lock

E12

[ USEFUL FEATURES ]

• Channel/Timer display

• Channel recall

• TV/Video selection

• Surround sound

• Mute

• Sound mode

• Equalizer

• Favourite channels

E13

[ NICAM/A2 STEREO

SYSTEM

BROADCASTS ]

E14

[ TELETEXT

BROADCASTS ]

E15

[

TROUBLESHOOTING

]

E16

[ SPECIFICATIONS ]

E17

[ DEFINITION OF

TERMS ]

Contents

29L-FG5RU(01-04)EN 19/1/06, 6:46 PM1

Damage

Turn off the power and unplug

the power cord from the wall

outlet immediately if the TV set begins to make

any unusual noises or gives off smoke or an

unusual smell. Then call your dealer for service.

Unstable surface

and shocks

Do not place this TV set on an

unstable cart, stand, shelf, or table. The TV set

may fall, causing serious injury to a child or

adult, and serious damage to the set. Sharp

recommends securing the TV set to a stable

surface or wall to prevent the set from falling due

to sudden shocks or impact.

Moisture

To prevent electrical shock, do

not use the TV set in an

excessively damp place.

Liquid entry

Do not place a flower vase

or anything else containing liquid

on the TV set, as liquid spilt on the TV set can

cause electrical shock or failure.

TV Set position

Do place the TV set onto an even

stand, table or rack which size is

bigger than the TV set.

If the TV set is put onto a smaller

size or uneven stand, table or rack may cause

the TV cabinet to distort.

Do not put or insert anything between TV set

and the stand, table or rack.

Ventilation

Do not place this TV set in a

confined area, such as on a

bookshelf or in a built-in case. Leave adequate

space behind the TV for proper ventilation.

Servicing

To reduce the risk of electric

shock, do not remove the back

of the cabinet. This TV set

contains dangerous voltage.

Power-cord

protection

To prevent electrical shock, do

not subject the AC power cord to damage by

bending or twisting it, or by placing heavy items

on top of it and do not place the AC power cord

under the TV set. If the AC power cord becomes

damaged, unplug it from the wall outlet

immediately and call your dealer for service.

Water

To prevent fire or electrical

shock, do not place the TV set

near a bathroom, swimming pool or other area

where it may become wet.

Object entry

Never insert or drop any metallic

or inflammable objects into the

ventilation openings of the TV set, as this can

cause fire, electrical shock, or electrical failure.

Uneven surface and

excessive force

Television equipment and cart

combination should be moved with care. Quick

stops, excessive force, and uneven surfaces

may cause the equipment and cart combination

to overturn.

Fire prevention

To prevent fire, never place any

type of candle or naked flames on

the top or near the TV set.

E1 SAFETY PRECAUTIONS

29L-FG5RU(01-04)EN 19/1/06, 6:46 PM2

Enjoy playback from a video disc player, VCR or other video equipment by connecting them

to this TV set using the Audio/Video in terminals.

E2 ACCESSORIES

E4 CONNECTING TO OTHER EQUIPMENTS

The following accessories are included with this television.

Remote Control Size-AA batteries Operation manual

E3 ANTENNA CONNECTION

Connecting to an antenna Connecting to an antenna via a VCR

COMPONENT

AUDIO

VIDEO

AV-1I N OUT

(MONO)

)

Standard DIN45325

plug (IEC 169-2)

75-ohm

coaxial cable

(round cable)

(not supplied)

300-ohm

twin-lead

flat feeder

(not supplied)

75-ohm

impedance

converter

(not supplied)

Antenna in

VCR

To antenna

in terminal

To RF out

terminal

If your outdoor antenna uses a 75-ohm coaxial

cable with a standard DIN45325 plug (IEC 169-2),

plug it into the antenna jack at the rear of the set.

If your outdoor antenna uses a 300-ohm twin-lead

flat feeder, connect a 300-ohm to 75-ohm

impedance converter and plug it into the antenna

jack at the rear of the set.

Example of front terminal usage

•When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.

Yellow : To VIDEO

White : To AUDIO (L)

Red : To AUDIO (R)

TV VCR

DVD Player

Camcorder Video Game

To Audio/Video

out terminals

29L-FG5RU(01-04)EN 6/2/06, 8:25 AM3

CONNECTING TO OTHER EQUIPMENTS (Continued)

Example of rear terminal usage

COMPONENT

AUDIO

VIDEO

AV-1 IN OUT

(MONO)

PB(CB)

PR(CR)

COMPONENT

AUDIO

VIDEO

AV-1 IN OUT

(MONO)

PB(CB)

PR(CR)

For Playback

DVD Player

VCR

For Recording and Editing

VCR

To Audio/Video

out terminals

To Audio/Video

out terminals

To Audio/Video

in terminals

Yellow: To VIDEO

White : To AUDIO (L)

Red : To AUDIO (R)

E5 CONNECTING AND WATCHING DVD

Connecting to a DVD player

The DVD input terminals (COMPONENT-IN) on the rear of the TV can be used to input high-

quality images from a DVD player.

Connecting the video terminals

DVD input terminals DVD player

COMPONENT-IN

VIDEO

Y Y or Y/Y

PB(CB)PB(CB) or

B-Y/Pb

PR(CR)PR(CR) or

R-Y/Pr

COMPONENT

AUDIO

VIDEO

AV-1IN OUT

(MONO)

)

DVD input terminals

COMPONENT

AUDIO

VIDEO

AV-1 IN OUT

(MONO)

)

DVD player

Red : To AUDIO IN (R)

White : To AUDIO IN (L)

Green : To Y

Blue : To P

)

Red : To P

)

To audio out

(L/R) terminals

To colour-difference

(component video)

out terminals

Watching DVD

!Press

TV/VIDEO

to select “COMPONENT”, DVD input

screen.

@Turn on the DVD player and begin playback.

•For playback of monaural audio, connect the external source to the audio input left terminal on the front or rear of

the TV set (MONO) to hear the same sound from both speakers.

•The audiovisual cords required to connect the TV set with video equipment may differ from those shown in the

above diagram. See the operation manual of your video equipment for connection details.

•The above recording and editing connections are intended solely for personal use and not for the illegal copying of

audiovisual material protected by copyright laws.

•The rear COMPONENT-IN terminals have the priority over the rear AV1-IN terminals.

If 2 equipments are connected to the TV set from the rear COMPONENT-IN terminals and rear AV1-IN terminals at

the same time, COMPONENT-IN picture will be automatically displayed.

POWER

SAVE

TV/VIDEO

SOUND MODE

SURROUND

NORMAL

123

456

BACD

MPX

TV/VIDEO

TNENOPMOC

29L-FG5RU(01-04)EN 19/1/06, 6:46 PM4

TV set

E6 PART NAMES

Headphone jack

•

Insert headphone

plug into headphone

jack to listen to audio

with headphone.

145623 7 8

To open the door

Using the projection located under

the “√PULL-OPEN”indication,

pull and lift the door open.

To close the door

Using the projection, lower the

door until closed.

Caution:

•When opening or closing the door,

do not insert your fingers into the

gap between the door and front

panel. This may result in an injury.

POWER

POWER switch

Turns on and off the main power.

2Power indicator

Power can be turned on by the remote control

when the indicator is lit red.

3Infrared sensor window

Receives the infrared wave from the remote

control.

MENU/PRESET

MENU/PRESET button

Tunes the channels. Used for MENU setup.

5/ Volume up/down buttons

Adjusts the volume.

Channel up/down buttons

Selects the channels. Tunes or sets the channels.

7Video input terminal (AV-2 IN)

Connects to a camcorder, video game, etc.

8Audio input terminals (AV-2 IN)

Connects to a camcorder, video game, etc.

9Headphone jack

Use to listen to the audio with headphone.

Remote control

Turns the TV on or to Standby mode.

Mutes the sound and restores sound to previous level.

Switches between main and sub sound, and stereo

and monaural sound.

Switches between MOVIE, MUSIC, NEWS and

CUSTOM.

Switches between “OFF”or “ESS”(during receiving

signal stereo) and “OFF”or “EPS”(during receiving

signal monaural).

Returns to previously viewed channel.

Adjusts the volume. Used for MENU setup.

Resets all settings.

(

Switches POWER SAVE mode on or off.

)

Switches between TV broadcasts and AV input

programmes.

Displays the channel and timer settings on the screen.

Number buttons

Switches between one- or two-digit mode channel

selection.

Colour buttons

Operate the Favourite Channel and Teletext functions.

Selects the channel. Used for MENU setup.

Calls the MENU screen.

Teletext buttons

Operate the Teletext functions.

Infrared transmitter window

Aim this window at the infrared sensor window on your

TV set.

Installing batteries

1Pull up or replace back the

battery cover.

2Insert two batteries (size

AA). Be sure to match the

battery j/kterminals.

POWER

SAVE

TV/VIDEO

SOUND MODE

SURROUND

NORMAL

TV/TEXT

123

456

LIST

BACD

MPX

SURROUND

SOUND MODE

MPX

NORMAL

TV/VIDEO

POWER SAVE

(

)

29L-FG5RU(05-08)EN 6/2/06, 8:26 AM5

[ TV Set (Bottom) ]

Power indicator

POWER

Turn on the power

• When the power indicator is off, press POWER .

• When the power indicator is red, press on the remote control. The power

indicator changes to green and a picture appears.

On-screen display language selection

TV set

• Press

MENU/PRESET

for more than two seconds, the

language select mode appears.

• Press CH / CH to select desired language.

• Pressing

MENU/PRESET

changes the screen as shown below.

MENU screen

• Press MENU to call MENU screen.

• Press CH / CH to select “CH-SETTING”.

• Press / to display CH-SETTING menu.

• Press CH / CH to select “LANGUAGE”.

• Press / to select desired language.

• Press MENU until normal screen appears.

[ Behind the door ]

Channel selection

!Using

• Press CH and channels change as shown below.

1 /2 /... /98 /99 /AV1 (or COMPONENT) /AV2 /0 /1 /2 ...

• Press CH and channels change as shown below.

1 /0 /AV2 /AV1 (or COMPONENT) /99 /98 /... /2 /1 /0 ...

@With the number buttons (on remote control)

• To select a one-digit channel, such as 5, press

5. If “5-” is indicated, press to

select one-digit input, and then press 5

again.

• To select a two-digit channel, such as 15,

press to select the two-digit input.

Press 1, and then press 5.

Adjusting volume

!Adjust volume using / .

• The volume bar disappears approximately five

seconds after the volume has been adjusted.

• When the power indicator is red, either CH / CH on the TV can be pressed to turn on the power.

• Channels that have been skipped cannot be selected by CH / CH .

• The AV1 (or COMPONENT) and AV2 input channels can be selected using TV/VIDEO .

E7 BASIC OPERATION

HENGL I S

ЙРУССКИ

SELECT : CH

MENU/PRESET

POWER

SAVE

TV/VIDEO

SOUND MODE

SURROUND

NORMAL

123

456

BACD

MPX

LISTLIST

–1

––

VOLU

E19

ENGLISH

РУССКИЙ

Language CH-Setting Normal screen

ENU

SOUND

PICTURE

FEATURE

CH - SE TT I NG

AUT

AUTO

OFF

168 . 25

CH - SE TT I NG

COLOUR- SYST E

POS I T I ON

SOUND - SYST E

SK I P

AUTO

ANUAL

LANGUAGE ENGL I SH

29L-FG5RU(05-08)EN 20/1/06, 8:28 AM6

Enables individual channel setting.

!Press

to call MENU screen.

@Press

to select “CH-SETTING”.

If you press

MENU/PRESET

on TV set for more than two

seconds during normal screen, the LANGUAGE

mode screen will appear.

Press

MENU/PRESET

again to display CH-SETTING menu.

•Pressing

MENU/PRESET

changes the screen as shown

below.

#Press / to display CH-SETTING

menu.

$Press

to select desired setting.

%Each time you press / , setting

for individual items changes as follows:

•POSITION

The channel position changes to the higher or lower number.

•COLOUR-SYSTEM

•SOUND-SYSTEM

•SKIP

ON OFF

When set “SKIP”to “ON”, the channel number are set to SKIP. To turn off SKIP, press the number

buttons to select the desired channel and then set “SKIP”to “OFF”.

•AUTO

Press / and Auto Channel Tuning

is started. Auto tuning bar will shown during

Auto Search only.

•MANUAL (FINE tuning)

i) Each time / is pressed, the

frequency changes to allow fine tuning and

the colour of channel number changes to

yellow to indicate fine tuning.

ii) Press / for more than 2

seconds, the “Manual Channel Tuning”will

start. If a signal is found, the Manual Channel

Tuning will stop searching.

^Press

until normal screen appears.

[ Behind the door ]

•Switching COLOUR-SYSTEM:

Set the system to “AUTO”for normal TV reception. The AUTO mode automatically detects the receiving signal

system and changes the reception system of the TV set. When the picture is not stable, switching to an appropriate

system may improve the picture quality.

•Switching SOUND-SYSTEM:

Set the system to “AUTO”for normal TV reception. The AUTO mode automatically detects the receiving signal

system and changes the reception system of the TV set. When the sound is not stable, switching to an appropriate

system may improve the sound quality.

•When using FINE, the channel number changes from green to yellow.

E8 CHANNEL SETTING

MENU/PRESET

Language CH-Setting Normal screen

ENU

SOUND

PICTURE

FEATURE

CH - SE TT I NG

SELECT : CH ENTER : RETURN :

ENU

AUTO

OFF

168 . 25

CH - SE TT I NG

COLOUR- SYST E

POS I T I ON

SOUND - SYST E

SK I P

AUTO

ANUAL

LANGUAGE ENGL I SH

SELECT : CH ADJUST : RETURN :

ENU

AUTO SECAMPA L

B/G NICAM B/GB/G A2AUTO

D/K D/K NICAM I I NICAM

AUTO

OFF

168 . 25

CH - SE TT I NG

COLOUR- SYST E

POS I T I ON

SOUND - SYST E

SK I P

AUTO

ANUAL

LANGUAGE ENGL I SH

SELECT : CH ADJUST : RETURN:

ENU

OFF

168 . 25

CH - SE TT I NG

COLOUR- SYST E

POS I T I ON

SOUND - SYST E

SK I P

AUTO

ANUAL

LANGUAGE ENGL I SH

SELECT : CH ADJUST : RETURN:

ENU

AUTO

POWER

SAVE

TV/VIDEO

SOUND MODE

SURROUND

NORMAL

123

456

BACD

MPX

LISTLIST

29L-FG5RU(05-08)EN 19/1/06, 6:47 PM7

CONTRAST 50

!Press

to call MENU screen.

@Press

to select “PICTURE” or “SOUND”.

#Press / to display PICTURE or SOUND menu.

$Press

to select adjustment items.

%Adjust using / .

•Wait for approximately five seconds to return to PICTURE/SOUND menu.

^Repeat steps 4 and 5 above to adjust other items.

&Press

until normal screen appears.

The following table lists the adjustment items shown in the PICTURE/SOUND menu

and how they change as you press / .

PICTURE menu table

•Pressing NORMAL while a PICTURE/SOUND selection is displayed, only the selected mode is reset to the standard

(factory-setting) position.

•Pressing NORMAL while the PICTURE/SOUND menu screen is displayed will reset all the items of PICTURE/SOUND

menu to the standard (factory-setting) position.

•Pressing NORMAL will reset all the items of PICTURE menu and SOUND menu to the standard (factory-setting) position.

E9 PICTURE OR SOUND ADJUSTMENT

POWER

SAVE

TV/VIDEO

SOUND MODE

SURROUND

NORMAL

123

456

BACD

MPX

LISTLIST

NORMAL

ENU

SOUND

PICTURE

FEATURE

CH - SE TT I NG

– +

–+

Selected item Press Press

VIDEO MODE

CONTRAST To decrease contrast To increase contrast

COLOUR For less colour intensity For more colour intensity

BRIGHTNESS For less brightness For more brightness

TINT To move tint toward red To move tint toward green

WHITE TEMP To more reddish To more bluish

background background

SHARPNESS For less sharpness For more sharpness

PICTURE NR (see note below)

ON OFF

DYNAMIC SOFT CUSTOMSTANDARD SOFT CUSTOM

•TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV input)

•Picture Noise Reduction

Noise might be generated on images when playing deteriorated video tapes or

when receiving broadcasts with relatively weak signals. In these cases, set

PICTURE NR to “ON”to reduce the noise. However, when receiving good images

without noise, you can get better image quality by turning OFF this feature.

•WHITE TEMP can only be adjusted on PICTURE menu.

•If any items is adjusted, VIDEO MODE will automatically change to CUSTOM.

SOUND menu table

Selected item Press Press

AVL*2The AVL is ON The AVL is OFF

BASS+ The BASS+ is ON The BASS+ is OFF

ON OFF

EQUALIZER (Refer to for details on Equalizer)E12

SURROUND*1(Please see note below)

BALANCE To shift balance To shift balance

toward left toward right

•AVL is advised to be set to “ON”when compact disk (CD) is being playback.

*1: SURROUND mode can be set between

(i) OFF ESS (during receiving sound signal is stereo)

(ii) OFF EPS (during receiving sound signal is monaural)

*2: Please see

E17

for details on Definition of Terms.

→

←

→

←

ENU

SOUND

PICTURE

FEATURE

CH - SE TT I NG

[ PICTURE menu screen ]

PICTURE

–10

CUST

+25

–20

CONTRAST

COLOUR

VIDEO

ODE

BR I GHTNESS

TINT

SHARPNESS

PICTURE NR

HITE TE

SELECT : CH ADJUST : RETURN:

ENU

BALANCE 15

[ SOUND menu screen ]

SOUND

SURROUND EPS

EQUAL I ZER

BALANCE 15

AVL ON

BASS+ON

SELECT : CH ADJUST : RETURN:

ENU

29L-FG5RU(05-08)EN 6/2/06, 8:26 AM8

On timer

Automatically turns power on after a set length of time has passed.

!Press

to call MENU screen.

@Press

to select “TIMER”.

#Press / to display TIMER menu.

$Press

to select “ON ”.

%Press / to set time for TV to

turn on.

• Maximum time that can be preset is 12 hours

and 50 minutes. Timer start to count down after

setting.

^Press

to select “POSITION”.

&Press / to set the channel.

*Repeat step 6 to 7 above to select and set the

“VOLUME”.

(Press

until normal screen appears.

)Press to put TV set into Standby mode.

• Power indicator lights up orange to indicate On

Timer is set.

• When the preset length of time setting has

passed, the power turns on and a picture

appears on the screen.

• The ON TIMER speaker volume gradually

increases from zero to preset volume.

E10 TIMER SETTING

[ TV Set (Bottom) ]

POWER

SAVE

TV/VIDEO

SOUND MODE

SURROUND

NORMAL

123

456

BACD

MPX

LISTLIST

Power indicator

(Orange)

ENU

SOUND

PICTURE

FEATURE

CH - SE TT I NG

SELECT : CH ENTER: RETURN :

ENU

ON 8 : 0 0

POS I T I ON ––

VOLU

E––

OFF –– :––

––:––

BEEP RE

INDER OFF

SELECT : CH ADJUST : RETURN:

ENU

ON 8 : 0 0

POS I T I ON 78

VOLU

E––

OFF –– :––

––:––

BEEP RE

INDER OFF

SELECT : CH ADJUST : RETURN:

ENU

ON 8 : 0 0

POS I T I ON 78

VOLU

E23

OFF –– :––

––:––

BEEP RE

INDER OFF

SELECT : CH ADJUST : RETURN:

ENU

Off timer

Automatically turns power off after a set length of time has passed.

!Repeat step 1 to 3 of ON TIMER.

@Press

to select “OFF ”.

#Press / to set time for TV to

turn off.

•Maximum time that can be preset is 12 hours

and 50 minutes. Timer start to count down after

setting.

$Press

until normal screen appears.

•Five minutes before the preset length of time

expires, the remaining time appears on the

screen.

•A flashing display of the remaining time appears

during the last few seconds. When the preset length of time has passed, the

TV set enters the Standby mode.

•The On Timer is cancelled if the power is turned off using POWER .

•If the TV set is turned on by the On Timer, then the TV set will be automatically turned off in two hours if no buttons

are pressed on the TV set or remote control.

•The Off timer is cancelled if the power is turned off or set to the Standby mode using on the remote control

or POWER on the TV set, or if the power is otherwise interrupted.

ON ––:––

POS I T I ON ––

VOLU

E––

OFF –– :––

––:––

BEEP RE

INDER OFF

SELECT : CH ADJUST : RETURN:

ENU

ON ––:––

POS I T I ON ––

VOLU

E––

OFF 2 : 30

––:––

BEEP RE

INDER OFF

SELECT : CH ADJUST : RETURN:

ENU

OFF 0 : 05

OFF 0 : 04

OFF 0 : 03

OFF 0 : 02

OFF 0 : 01

OFF 0 : 00

Flashing

29L-FG5RU(09-12)EN 19/1/06, 6:48 PM9

Reminder on-screen timer

Lets you know when a preset length of time has passed by displaying a countdown timer on

the screen. This is useful for timer cooking while you watch TV.

Repeat step 1 to 3 of ON TIMER.

Press

to select “ ”.

Press / to set time.

•Maximum time that can be preset is 12 hours

and 50 minutes.

•The example at right shows that the Reminder will be activated after one

hour and 50 minutes.

Press

until normal screen appears.

•Five minutes before the preset length of time

expires (in the example, after one hour and 45

minutes) and each minute thereafter, the

remaining time appears on the screen for several

seconds with the beeping sound. (When BEEP REMINDER is set to “ON”)

•When the preset length of time has passed, “0:00”flashes in red with the

beeping sound. (When BEEP REMINDER is set to “ON”)

0:05

0:04

0:03

0:02

0:01

0:00

Flashing

Beep reminder

It is a function to alert with beeping sound that the Reminder is expiring

soon with the remaining time OSD displays.

Repeat step 1 to 3 of ON TIMER.

Press

to select “BEEP REMINDER”.

Press / to select “ON”or “OFF”.

•ON: To alert users with beeping sound that the

timer are expiring soon.

•OFF: The beeping sound is off.

Press

until normal screen appears.

E10 TIMER SETTING (Continued)

ON ––:––

POS I T I ON ––

VOLU

E––

OFF –– :––

––:––

BEEP RE

INDER OFF

ON ––:––

POS I T I ON ––

VOLU

E––

OFF –– :––

1:50

BEEP RE

INDER OFF

POWER

SAVE

TV/VIDEO

SOUND MODE

SURROUND

NORMAL

123

456

BACD

MPX

LISTLIST

ON ––:––

POS I T I ON ––

VOLU

E––

OFF –– :––

––:––

BEEP RE

INDER ON

E11 FEATURES

Blue back

Automatically turns the screen blue if a broadcast signal is not received.

Press

to call MENU screen.

Press

to select “FEATURE”.

Press / to display FEATURE menu.

Press

to select “BLUE BACK”.

Press / to select “ON”or “OFF”.

Press

until normal screen appears.

When BLUE BACK is set to “ON”:

POWER

SAVE

TV/VIDEO

SOUND MODE

SURROUND

NORMAL

123

456

BACD

MPX

LISTLIST

ENU

SOUND

PICTURE

FEATURE

CH - SE TT I NG

FEATURE

AUTO SELECT ON

ER SAV

OFF

BLUE BACK ON

CH I LD LOCK

16: 9

ODE OFF

after 3 seconds

after 15 minutes

No signal Blue back TV off (Indicator)

Standby mode

Power indicator

lights up red

•The Reminder also works in the Standby mode. Power is automatically turned on five minutes before the preset

length of time expires. The TV set automatically returns to the Standby mode approximately 1 minute after the timer

expired if no buttons are pressed on the TV set or remote control.

•The Reminder is cancelled if POWER on the TV set is pressed or if the power is otherwise interrupted.

•Poor reception due to weak signals and too much noise may activate BLUE BACK, despite the presence of a

broadcast signal. To continue watching TV under these conditions, switch “BLUE BACK”to “OFF”.

•When Off timer is set, the OFF TIMER setting has priority over BLUE BACK.

29L-FG5RU(09-12)EN 19/1/06, 6:48 PM10

Table des matières

Autres manuels Sharp TV

Sharp

Sharp 21H-FT1 Manuel utilisateur

Sharp

Sharp 21B-FX5 Manuel utilisateur

Sharp

Sharp Aquos LC-24LE150M Manuel utilisateur

Sharp

Sharp 32SF560 Manuel utilisateur

Sharp

Sharp 70FS-57S Manuel utilisateur

Sharp

Sharp CX68KF5 Manuel utilisateur

Sharp

Sharp 21LF-90N Manuel utilisateur

Sharp

Sharp 28JS-74E Manuel utilisateur

Sharp

Sharp 20F550 Manuel utilisateur

Sharp

Sharp 40AJ2K Manuel utilisateur

Sharp

Sharp Aquos LC-24LE150M Manuel utilisateur

Sharp

Sharp 50BJ3K Manuel technique

Sharp

Sharp 27C24 Manuel utilisateur

Sharp

Sharp AQUOS LC-32CHG6001E Manuel utilisateur

Sharp

Sharp LC-40CUG8062K Manuel utilisateur

Sharp

Sharp 29FL94 Manuel utilisateur

Sharp

Sharp LC-40LE340E Manuel utilisateur

Sharp

Sharp 21S-FX10F Manuel utilisateur

Sharp

Sharp CX34N3 Manuel utilisateur

Sharp

Sharp Aquos LC 32GD6U Manuel utilisateur

Sharp

Sharp 21LF-90H Manuel utilisateur

Sharp

Sharp 21S-FX10U Manuel utilisateur

Sharp

Sharp 32BE2K Manuel technique

Sharp

Sharp ROKU LC-43LB371U Manuel utilisateur

Manuels TV populaires d'autres marques

Philips

Philips Colour Television Manuel utilisateur

Toshiba

Toshiba 27A10 Manuel utilisateur

Philips

Philips 42PF9630A/37 Manuel utilisateur

Hitachi

Hitachi 32FX48B Manuel utilisateur

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur

Changhong Electric

Changhong Electric uhd55b6000is Manuel utilisateur

Philips

Philips Matchline 21CE7551 Manuel utilisateur

Panasonic

Panasonic Genus TX-G10 Manuel utilisateur

Toshiba

Toshiba 19A20 Manuel utilisateur

Philips

Philips 25PT4523-16 Manuel utilisateur

Sony

Sony XBR-100Z9D Manuel utilisateur

Philips

Philips PR0930X3 Manuel utilisateur

Philips

Philips Brilliance 231P4QPY Manuel utilisateur

Samsung

Samsung 55S9 B Series Manuel utilisateur

Philips

Philips 32HF9385D Guide de dépannage

Loewe

Loewe Table Stand Reference 55 Manuel utilisateur

Philips

Philips 32PFH5300 Manuel utilisateur

Sylvania

Sylvania 6427FB Manuel utilisateur