Sharp LL-S201A Manuel utilisateur

LL-S201A

Operation Manual

(Firmware version 1.700)

Target model (December 2013)

Touch display LL-S201A

Index

Important information ...............................................................................................................2

Trademarks..............................................................................................................................2

Checking the update target product ............................................................................................3

System Requirements for updating..............................................................................................4

Connecting Equipment...............................................................................................................4

Connecting the display to a power source ....................................................................................5

Extract the compressed file ........................................................................................................6

１．Introduction .......................................................................................................................7

２．Step 1 (Cable confirmation)..................................................................................................7

３．Step 2 (Detection of LL-S201A).............................................................................................8

４．Step 3 ( Update Confirmation) ..............................................................................................9

５．Step 4 (Starting update) .................................................................................................... 10

６．Finish (Update result) ........................................................................................................ 11

Step 2 Error messages............................................................................................................. 12

Step 4 Error messages............................................................................................................. 12

This software enables you to update the LL-S201A touch display firmware.

•You can update the firmware to the latest version (1.700).

•This firmware update is for LL-S201A that has not been previously updated. For the products covered

by this update please refer to the items in the "Checking the update target product" section of this

manual.

•With this firmware (1.700), the following items in the LL-S201A have been improved.

－In long term use the LL-S201A volume setting may return to default when the power of the AC

adapter is removed. With this update the LL-S201A will not return to default when AC power is

removed.

－Touching the display with damp fingers the LL-S201A may not respond. We have improved the

touch operation of the display with this update.

•This software does not support the Mac Operating System so please contact your product dealer for

upgrading.

•If an unexpected power failure occurs or a cable is unplugged during writing the internal LL-S201A

memory critical damage could occur.

•SHARP CORPORATION bears no responsibility for errors during use by the customer or a third party, or

any failures or damage cause by this software during use, except where indemnity liability is recognized

under law.

•Modifying or copying in whole or part any of this software or its manual without permission from SHARP

CORPORATION is not permitted.

•This manual and software may be subject to change without notice.

•Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation.

•Apple, Mac and Mac OS are registered trademarks of Apple Inc.

•All other brand and product names are trademarks or registered trademarks of their respective holders.

Important information

Trademarks

Introduction

Hold the flap by the depression on the back of the display and pull the flap up.

Check the serial number of the seal affixed to the body of under the flap.

The update applies to the following serial number (x is any number).

２CxxxxxY

３Cxxxxx１

３Cxxxxx２

３Cxxxxx３

３Cxxxxx４

３Cxxxxx５

３Cxxxxx６

３Cxxxxx７

３Cxxxxx８

３Cxxxxx９

Checking the update target product

Setting up

Update of LL-S201A firmware is possible by using a personal computer with the following conditions.

If your personal computer does not meet these requirements, please contact your product dealer.

If you are using a laptop, please connect the AC adapter.

Connect the display and a Computer using the following instruction.

■Video Cable Connection

HDMI or Display Port must be connected from the LL-S201A to the computer performing update.

・HDMI input terminal

Check the orientation of the connector and insert it into the HDMI terminal.

・Display Port input terminal

Check the orientation of the connector and insert it into the Display port terminal.

System Requirements for updating

Item

Description

Computer

Microsoft Windows XP SP3 / Vista SP2 / 7 / 8 / 8.1

Note - XP requires the following;

-Microsoft.NET Framework 2.0 or later version

Hard drive

5MB or more free space

USB port

USB port（Ver. 1.1 or later）

Graphic card

Display Port or HDMI output

Screen resolution

The screen resolution should be set 1920 ×1080.

* If it is different resolution, please set it to 1920 x 1080.

Connecting Equipment

■USB Cable Connection

When updating, a USB cable must be connected between LL-S201A and the computer performing the

update. Please make sure to use the supplied USB cable.

Check the orientation of the connector and insert it into the USB terminal.

１．Connect the display to the power outlet using the supplied AC adapter and power cord.

２．Push the AC adapter core into the core restrainer.

Note- make sure power connection is securely connected because if power is lost during update, it may

cause fatal error.

Connecting the display to a power source

Expand on the desktop of the computer the compressed file that you downloaded from the Web page.

Run the Lls201aUpdateTool under the folder where it extracted. Please perform the instructions that

appear on the computer screen.

Extract the compressed file

double click or double tap

"Introduction" screen is displayed when program starts. A brief description of this software is displayed.

In case of touch panel user, please substitute a panel "touch" operation, for a mouse "click".

This screen shows a diagram to confirm the connection of LL-S201A and the computer. Check each

connecting cable, make sure it is securely connected and can’t be accidently disconnected during update.

１．Introduction

２．Step 1 (Cable confirmation)

Run the update program

This step automatically detects the LL-S201A connected to computer. Results are displayed on screen.

■Successful detection

If detection results are successful the "Next" button is enabled. Select "Next" and Proceed to Step 3.

■Detection failed or error occurred

・Detection failed

“Can’t find the display”- check the video and USB cable connection.

・Error occurred

If an error is detected a message is displayed. Refer to "Error message" section for details.

３．Step 2 (Detection of LL-S201A)

Enabled when display is found

Current software version

Before update, please read the displayed notes. Once notes are read, confirm by clicking the checkbox.

"Start" button is disabled until the check box is selected. Now select “Start” and the update process will

begin.

４．Step 3 ( Update Confirmation)

１：Select the check box if all of notes are confirmed.

２：After selecting the check box, click on “Start”.

Autres manuels pour LL-S201A

Table des matières

Autres manuels Sharp Moniteur

Sharp

Sharp PN-E421 Manuel utilisateur

Sharp

Sharp PN-V550 Manuel utilisateur

Sharp

Sharp PN-HM851 Guide de démarrage rapide

Sharp

Sharp PN-E602 Manuel utilisateur

Sharp

Sharp LL-T1820-H Manuel utilisateur

Sharp

Sharp PN-V601A Manuel utilisateur

Sharp

Sharp LL-T15G1 Manuel utilisateur

Sharp

Sharp mz-1d04 Manuel utilisateur

Sharp

Sharp PN-CD701 Feuille d'instructions

Sharp

Sharp PN-L752B Guide de l'utilisateur

Sharp

Sharp MultiSync ME652 Manuel utilisateur

Sharp

Sharp PN-C603D Manuel utilisateur

Sharp

Sharp LL-S242A-W Manuel utilisateur

Sharp

Sharp LL-173C Manuel utilisateur

Sharp

Sharp LL-T1803-H Manuel utilisateur

Sharp

Sharp PN-L601B Manuel utilisateur

Sharp

Sharp PN-60TA3 Manuel utilisateur

Sharp

Sharp LL-T1815 Manuel utilisateur

Sharp

Sharp PN-T322B Manuel utilisateur

Sharp

Sharp LL-T17A3 Manuel utilisateur

Sharp

Sharp PN-HW431 Manuel utilisateur

Sharp

Sharp PN-L805H Manuel utilisateur

Sharp

Sharp PN-A601 Manuel utilisateur

Sharp

Sharp PN-HW651 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation