Sharp SKCD24U0GS Manuel utilisateur

Sharp Convection Microwave Drawer & SuperSteam+ Pedestal

Model SKCD24U0GS

For use with models SMD2499FS and SSC2489DS.

IMPORTANT NOTES TO THE INSTALLER

• PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

• Observe all governing codes, ordinances, and safety instructions.

• Refer to these specic models' installation instructions for more information on placement.

• Be sure to leave these instructions with the consumer.

• Remove all packing material before beginning the installation.

NOTE:

This installation process requires two people. Please ensure you have another person to help lift and install the unit.

WARNING:

Follow all of the steps provided in this installation. Improperly securing or installing the unit can lead to possible injury or

damage to the unit.

INSTALLATION INSTRUCTIONS

ITEM PART NAME QTY PRICE

CODE

AUTC PEDESTAL

DPED-B002MRK0 1 N/A

BMOUNTING CLEATS

SPAK-B128MRE0 2 AK

CMOUNTING CLEAT SCREWS

XMSS742P38000 4 AA

DTOE KICK

GCOVHB087MRT0 1AT

ETOE KICK SCREWS

XUPS840P12X00 2 AA

FDRAWER MATS

PCOV-B009MRE0A 2 AN

GSCREW LEVELING

GLEGPB006MRE0 4 AC

HDRAWER DECORATION

HDECAC157MRP0 2 BB

SUPERSTEAM OVEN

CONVERSION BRACKET

LANGTB464MRP0

2 AP

SUPERSTEAM OVEN

CONVERSION BRACKET SCREWS

LX-BZA148WREZ

2 AA

Items B-J are available for ordering.

I J

INSTALLATION INSTRUCTIONS

Overall Dimensions

14 7/16"

(366.7 MM) MIN

15 3/4"

(390.5 MM) MAX

23 13/16"

(604.8 MM)

23 1/2"

(596.9 MM)

Inside Drawer Dimensions

21 13/16"

(554.0 MM)

18 11/16"

(474.7 MM)

23 11/16"

(601.7 MM)

1. Cabinet cutout dimensions. Prepare the cabinet opening

as shown in Figure 1.

Height (A)

1/2" (876 mm)

Width (B)

24" (610 mm)

Depth (C)

1/2" min. (597 mm)

*NOTE: INSTALLER PROVIDE

TOP FILLER IF NEEDED

SUGGESTED ELECTRICAL

OUTLET LOCATION

FIGURE 1

2. Convection Microwave Drawer - Place the oven on a

secure surface. Remove the 4 bottom screws (2 on each

side of the oven) as shown in Figure 2A. Carefully place

the oven on top of the pedestal in-between the mounting

rails on the left and right.

For Convection Microwave Drawer

CONVECTION DRAWER IMAGES

LEFT

MOUNTING

RAILS RIGHT

MOUNTING

RAILS

ADJUSTABLE

FEET

FIGURE 2A

INSTALLATION INSTRUCTIONS

SuperSteam+ Oven - Place the oven on a secure surface.

Remove the 2 bottom screws (1 on each side of the

oven) as showing in Figure 2B. Install the two conversion

brackets with the two provided screws (J). See Figure 2C.

Carefully place the oven on top of the pedestal in-between

the conversion brackets on the left and right.

For SuperSteam+ Oven

FIGURE 2B

ADJUSTABLE

FEET

LEFT

MOUNTING

RAILS

BRACKET BRACKET

RIGHT

MOUNTING

RAILS

FIGURE 2C

INSTALLATION INSTRUCTIONS

3. Align the front face of the oven with the front face of the

pedestal drawers. Once positioned, fasten the oven to the

pedestal.

Convection Microwave Drawer - Use the same 4

removed screws from Step 2. See Figure 3A.

* Refer to oven installation instructions for the models'

specic below-the-counter clearance guidelines.

For Convection Microwave Drawer

FIGURE 3A

SuperSteam+ Oven - Use the 2 removed screws from

Step 2. See Figure 3B.

* Refer to oven installation instructions for the models'

specic below-the-counter clearance guidelines.

For SuperSteam+ Oven

FIGURE 3B

4. Adjust the height of the overall unit to t your specic

opening. The pedestal contains 4 adjustable feet. To

adjust, have one person tilt the unit to one side while the

other person adjusts the 2 feet on the raised side to the

desired height. Repeat this step by tilting the unit to the

other side and adjusting the other 2 feet. Ensure that all

feet are adjusted equally to balance the unit. See Figure 4.

CAUTION: Do not tilt forward. The pedestal drawers will

extend out.

USE CHANNEL LOCK OR

SLIP-JOINT PLIERS TO

LOOSEN THE FEET

PRIOR TO ADJUSTMENT

FIGURE 4

5. Once the overall height has been conrmed, measure the

distance from the top surface of the pedestal unit to the

oor. See Figure 5. This measurement will be needed for

the installation of the wooden mounting cleats.

FIGURE 5

INSTALLATION INSTRUCTIONS

6. Install the wooden cleats.Align the bottom of the cleat to the

measurement from Step 5. The pedestal can be installed

ush or standard with the face of the cabinet. Depending

on the preference, the depth of the cleat position should

be adjusted as such. See Figure 6. Position each cleat and

mark the holes on the cabinet. Pre-drill each hole in the

cabinet using a 1/16" (1.6 mm) drill bit. Attach both cleats

using the 4 mounting cleat screws. See Figure 7.

MOUNTING CLEAT SCREWS

FIGURE 6

STANDARD MOUNT

CLEAT CLEAT

FLUSH MOUNT

CABINET FACECABINET FACE

UTC DRAWER FACE UTC DRAWER FACE

*NOTE: WHEN USING CONTRACTOR CABINET FACES,

ADD OR SUBTRACT ADDITIONAL DIMENSION.

SUPPLIED DRAWER FACES ARE 1

/16"

FIGURE 7

7. Slide the unit into the opening. Plug oven into the wall

receptacle prior to pushing the unit all the way in. See

Figure 8. The mounting angles of the oven should rest

against the installed wooden cleats.

NOTE:

• To aid in sliding the unit into the space, open the bottom

drawer and use middle frame to push into place. In

addition, there are built-in handles on each side of

the pedestal that can assist in the movement of the

unit. Tuck cord behind the oven before pushing the

assembled unit in.

• If the chosen height of the installation presents a gap

between the counter top and the unit, attach cabinet

ller strip as noted in Figure 8. Cabinet ller strip can be

purchased wherever cabinets are sold.

*NOTE: ATTACH CABINET FILLER STRIP IF NEEDED

LEVEL UNIT TO DESIRED HEIGHT

FIGURE 8

INSTALLATION INSTRUCTIONS

8. Open the oven door and pre-drill each hole using a 1/16"

(1.6 mm) drill bit. Fasten the unit to the mounting cleats

using the 4 mounting screws provided with your oven.

See Figure 9A or 9B.

For Convection Microwave Drawer

FIGURE 9A

For SuperSteam+ Oven

FIGURE 9B

9. Install bottom kickplate. Use the 2 toe kick screws to

fasten the plate. The 2 toe kick screws come installed in

the unit. Remove these 2 screws prior to positioning the

kickplate. See Figure 10.

*NOTE: PROVIDE FILLER IF NEEDED

SERIAL

NAMEPLATE

FIGURE 10

CUSTOM PANEL INSTALLATION

The pedestal drawer fronts can be replaced with custom wood

fronts. If custom drawer faces are preferred, the stainless

steel drawer faces can be taken off by removing 5 screws (3

on the back side and 2 underneath). See Figure 11.

Suggested custom drawer face dimensions:

Height 5" (127 mm)

Width 23

11/16" (602 mm)

Depth 1

3/16" (30.2 mm)

FIGURE 11

SHARP ELECTRONICS CORPORATION • 100 Paragon Drive, Montvale, New Jersey 07645 • USA

For any other assistance or information about this kit, please call Sharp’s Customer Assistance Center: 1-800-BE-SHARP (1-800-237-4277)

SHARP ELECTRONICS OF CANADA LTD • 335 Britannia Road East, Mississauga, Ontario, L4Z 1W9 • Canada

For any other assistance or information about this kit, please call 877-278-6709 Mon-Fri: 8am-5pm EST (except statutory holidays)

Caisson pour tiroir four à micro-ondes et

SuperSteam+™ Sharp modèle SKCD24U0GS

Peut être utilisé avec les modèles SMD2499FS et SSC2489DS

NOTES IMPORTANTES À LA PERSONNE QUI FERA L'INSTALLATION

• VEUILLEZ LIRE ATTENTIVEMENT CES INSTRUCTIONS AVANT DE COMMENCER L'INSTALLATION.

• Veuillez respecter tous les codes de conduite, toutes les ordonnances et instructions de sécurité.

• Veuillez consulter les instructions d'installation du modèle en particulier pour plus de renseignements sur le placement.

• Veuillez vous assurer de laisser ces instructions au consommateur.

• Veuillez retirer tous les matériaux d'emballage avant de commencer l'installation.

REMARQUE :

Ce processus d'installation doit être exécuté par deux personnes. Veuillez vous assurer d'obtenir de l'aide d'une autre personne

pour soulever et installer l'appareil.

AVERTISSEMENT :

Veuillez suivre toutes les étapes indiquées dans cette installation, Une installation inadéquate de l'appareil peut entrainer des

blessures corporelles ou des dommages à l'appareil.

INSTRUCTIONS D'INSTALLATION

ARTICLE NOMS DE LA PIÈCE QTÉ CODE

DU PRIX

ACAISSON À INSTALLER SOUS LE COMPTOIR

DPED-B002MRK0 1 N/A

BTAQUETS DE FIXATION

SPAK-B128MRE0 2 AK

CVIS POUR LES TAQUETS DE FIXATION

XMSS742P38000 4 AA

DCOUP-DE-PIED

GCOVHB087MRT0 1AT

EVIS À COUP-DE-PIED

XUPS840P12X00 2 AA

FREVÊTEMENTS DE FOND DE TIROIR

PCOV-B009MRE0A 2 AN

GVIS DE MISE À NIVEAU

GLEGPB006MRE0 4 AC

HDÉCORATION POUR TIROIR

HDECAC157MRP0 2 BB

SUPPORT POUR CONVERSION

DU FOUR SUPERSTEAM

LANGTB464MRP0

2 AP

VIS DE SUPPORTS POUR CONVERSION DU

FOUR SUPERSTEAM

LX-BZA148WREZ

2 AA

Les articles B à J peuvent être commandés.

I J

INSTRUCTIONS D'INSTALLATION

Dimensions générales

14 7/16"

(366.7 MM) MIN

15 3/4"

(390.5 MM) MAX

23 13/16"

(604.8 MM)

23 1/2"

(596.9 MM)

596,9 mm

(23 1/2po)

366,7 mm

(14 7/16 po) MIN

390,5 mm

(15 3/4po) MAX

604,8 mm

(23 13/16 po)

Dimensions de l'intérieur du tiroir

21 13/16"

(554.0 MM)

18 11/16"

(474.7 MM)

23 11/16"

(601.7 MM)

554,0 mm

(21 13/16 po)

474,7 mm

(18 11/16 po)

601,7 mm

(23 11/16 po)

1. Dimensions de la découpe de l'armoire. Préparer

l'ouverture de l'armoire comme illustré à la Figure 1.

Hauteur (A)

876 mm (34 1/2po)

Largeur (B)

610 mm (24 po)

Profondeur (C)

597 cm (23 1/2po)

*NOTE: INSTALLER PROVIDE

TOP FILLER IF NEEDED

SUGGESTED ELECTRICAL

OUTLET LOCATION

EMPLACEMENT DE LA PRISE

ÉLECTRIQUE SUGGÉRÉ

*REMARQUE :

L'INSTALLATEUR DOIT

FOURNIR LA BANDE DE

SUPPORT, SI NÉCESSAIRE

FIGURE 1

Table des matières

Langues :

Autres manuels Sharp Four à micro-ondes

Sharp

Sharp YC-PS201AU Manuel utilisateur

Sharp

Sharp Carousel R-431ZS Manuel utilisateur

Sharp

Sharp SMC1585BSA Manuel utilisateur

Sharp

Sharp R-33STD Mode d’emploi

Sharp

Sharp R-775 Mode d’emploi

Sharp

Sharp R-520LK Manuel utilisateur

Sharp

Sharp EBR-9900W Manuel utilisateur

Sharp

Sharp Carousel R-203HW Manuel utilisateur

Sharp

Sharp R-652 Manuel utilisateur

Sharp

Sharp R-60ST Manuel utilisateur

Sharp

Sharp R-239-A Mode d’emploi

Sharp

Sharp R-200BK Manuel utilisateur

Sharp

Sharp R-61FBSTM Mode d’emploi

Sharp

Sharp R-617R Mode d’emploi

Sharp

Sharp R-28STM Manuel utilisateur

Sharp

Sharp R-510HK/HW Manuel utilisateur

Sharp

Sharp R-752M Manuel utilisateur

Sharp

Sharp Microwave Drawer SMD2489ES Manuel utilisateur

Sharp

Sharp R-653M Manuel utilisateur

Sharp

Sharp R-969 Mode d’emploi

Sharp

Sharp R-84A0STV Manuel utilisateur

Sharp

Sharp R-333 Manuel utilisateur

Sharp

Sharp R-922STWE Manuel utilisateur

Sharp

Sharp R-241CWAA Manuel utilisateur

Manuels Four à micro-ondes populaires d'autres marques

Daewoo

Daewoo KOG-574R0S Manuel utilisateur

LG MH7040SS Manuel utilisateur

Dometic

Dometic DOTRM13W Manuel utilisateur

Sanyo

Sanyo EM-X680 Manuel utilisateur

KitchenAid

KitchenAid KMCX4510 Instructions d'installation

Smeg

Smeg S45MCX1 Manuel utilisateur

Russell Hobbs

Russell Hobbs RHM2044 Manuel utilisateur

Sunbeam

Sunbeam SMW759 Manuel utilisateur

Gallet

Gallet FMOE230S Manuel utilisateur

Bosch

Bosch CEG732X.1B Manuel utilisateur

Dometic

Dometic Roadmate 230 Manuel utilisateur

Samsung

Samsung SJ0396W Manuel utilisateur

Sanyo

Sanyo EM-P494WS Manuel utilisateur

Electrolux

Electrolux EMS2840 Manuel utilisateur

Daewoo

Daewoo KOC-984T2S13 Manuel utilisateur

Impecca

Impecca CM07M2 Manuel utilisateur

Sanyo

Sanyo EM-G5596V UK2 Manuel utilisateur

Samsung

Samsung CE2927 Manuel utilisateur