Sharkoon RUSH POWER M Manuel utilisateur

Handbuch

Manual

Manuel d‘utilisation

Guia usario

使用手冊

Manuale d´istruzioni

Gebruiksaanwijzing

Guia usário

Instukcja obstugi

Content

1. Features

2. Speciﬁcations

2.1 Overview

2.2 Temperature range and humidity

2.3 Mains voltage and protective functions

2.4 Safety standards

3. Parts and accessory

4. The modular system of the Rush Power

4.1 The connectors at the PSU

4.2 The modular cables

5. Installation

5.1 Installing the Rush Power into a PC case

5.2 Connecting the PC components to the PSU

5.2.1 The connectors at a glance

5.2.2 Connecting mainboard and graphics card(s)

5.2.3 Connecting optical drives and other peripheral

devices

5.2.4 Connecting the cables to the PSU

5.2.5 Checking all connections

6. Troubleshooting

7. Cable diagrams and pin assignments

RUSH POWER M

Dear customer!

Congratulations for purchasing one premium quality SHARKOON product.

For a long life time and to take full advantage of this product we recommend that you

read this manual completely.

Have a good time with our product!

SHARKOON Technologies GmbH

1. Features

ATX 12 V v.2.31:

Supports the latest Intel and AMD processor based systems.

Separate 12 V rails:

Separate 12 V rails guarantee a stable power supply for all

components.

High energy efﬁciency:

This power supply achieves an energy efﬁciency higher than 80%.

This value indicates the ratio (in percent) between energy input

and output. The closer this value reaches 100%, the less power

dissipation does the PSU produce.

CABLE

MANAGEMENT

Cable management:

The PSU provides a modular cable system. Thus only the

required cables need to be connected.

ACTIVE PFC

Active PFC function:

This power supply operates with active power factor correction (PFC).

135mm FAN

135 mm fan:

The installed 135 mm fan provides a considerably higher airﬂow

with lower rpm, thus reducing the operating noise effectively.

1x/2x 6-PIN

1x/2x 6+2-PIN

2x/4x PCIe

PCIe connectors:

This power supply unit is equipped with two (SHA-R400M) / four

(SHA-R500M, SHA-R600M) PCIe connectors (6-pin plus 6+2-pin).

RUSH POWER M

WARNING

To prevent the risk of electric shock, do not open

the power supply housing. No user-exchangeable

parts inside. For service and maintenance refer

to authorized SHARKOON personnel. Warranty

is void under unauthorized attempt to open the

power supply housing.

Suitable for indoor or ofﬁce use only.

Keep the power supply away from humidity!

2. Speciﬁcations

2.1 Overview

Model No. SHA-R400M

Input (AC) Input voltage Current Frequency

100 – 240 V ~ 8 – 4 A 60 – 50 Hz

Output (DC) +3.3 V +5 V +12 V1+12 V2-12 V +5 VSB

Max. Output Current 24 A 20 A 18 A 18 A 0.3 A 2.5 A

Max. Combined Power 120 W 300 W

400 W

Model No. SHA-R500M

Input (AC) Input voltage Current Frequency

100 – 240 V ~ 10 – 5 A 60 – 50 Hz

Output (DC) +3.3 V +5 V +12 V1+12 V2-12 V +5 VSB

Max. Output Current 24 A 20 A 20 A 20 A 0.3 A 2.5 A

Max. Combined Power 130 W 360 W

500 W

Model No. SHA-R600M

Input (AC) Input voltage Current Frequency

115 – 240 V ~ 10 – 5 A 60 – 50 Hz

Output (DC) +3.3 V +5 V +12 V1+12 V2-12 V +5 VSB

Max. Output Current 24 A 24 A 30 A 30 A 0.3 A 2.5 A

Max. Combined Power 140 W 500 W

600 W

RUSH POWER M

2.3 Line voltage and protective functions

This PSU works with 100 to 240 V (50/60 Hz) and is equipped with the following

protective functions:

1. Over voltage protection:

The power supply provides a latch mode against over voltage, as deﬁned below:

Min. Max. Unit

+5 V 5.74 7.5 Volt

+3.3 V 3.76 4.8 Volt

+12 V1, 2 13.4 17 Volt

2. Short circuit protection:

The power supply is designed with a short circuit protection to prevent damage

of the power supply components. Main power will be shutdown when a short

circuit occurs. The PSU will return to normal after the short circuit has been re-

moved and the main power switch has been turned off and back on again, with a

minimum cycle pause of 2 seconds.

3. Over current protection:

The power supply provides a latch mode against over current, as deﬁned below:

Model No. Limit value (min.) Limit value (max.) Unit

+12 V1, 2

SHA-R400M

SHA-R500M

SHA-R600M

2.4 Safety standards

Our power supply has been certiﬁed to comply with CB, FCC, BSMI and CE safety

regulations.

Operation 0 to +40 °C 20 – 85% rel. humidity,

non-condensing

Storage -40 to +70 °C 5 – 90% rel. humidity,

non-condensing

2.2 Temperature range and humidity

RUSH POWER M

3. Parts and accessory

 • Powersupply“RushPower”(A)

 • Powercord(B)

 • Manual

 • Setwithmodularcables:

o PCIe cable set with 1x 6-pin and 1x 6+2-pin each (C): 1x SHA-R400M,

2x SHA-R500M, SHA-R600M

o 1x Peripheral (3x 4-pin / D)

o 1x Peripheral (2x 4-pin + 1x Floppy / E)

o 1x SATA cable (6x 15-pin / F)

 • Cableties(G)

 • Setwithscrews(H)

 • Cablebag(I)

Note:

If you are missing any of the items listed above, please contact customer service via

e-mail at [email protected] or call + 49 (0) 6403 – 775 6100.

C D E F

H I

RUSH POWER M

4. The modular system of the Rush Power

The special feature of this PSU is the so called cable management system to connect

the peripheral devices.Thanks to this modular system only the really required cables

need to be connected thus keeping your case proper and optimizing the airﬂow within.

4.1 The connectors at the PSU

A – 1x 10-pin connector for SATA cables

B – 4x 4-pin connector for 4-pin cables

C – 2x 6-pin connector for PCIe cables

4.2 The modular cables

Besides the 20+4-pin ATX connector cable and a 4+4-pin P8 connector cable – both

soldered to the PSU – the Rush Power is delivered with an extensive set of modular cables:

1x/2x PCIe connector cable (6-pin PSU

connector) for graphics cards (2x 6-pin +

2x 6+2-pin connectors).

RUSH POWER M

1x connector cable for peripheral devices

(4-pin PSU connector) for optical drives

(2 connectors) and ﬂoppy (1 connector).

1x connector cable for peripheral devices

(4-pin PSU connector) for optical drives

(3 connectors).

1x SATA connector cable

(10-pin PSU connector) for SATA drives

(6 connectors).

5. Installation

Remove an already installed PSU from the case. Proceed as follows:

1. Switch off your PC. Disconnect the PSU’s power cord from the wall outlet and your

PSU. Unplug all cables connected to the PC case (e.g. keyboard, mouse etc.).

2. Open the PC case (for additional information refer to the PC case’s manual).

3. Disconnect all cable connections between the PSU and other PC components (e.g

mainboard, HDDs, drives, fans etc.).

4. Remove the mounting screws connecting PSU and PC case and carefully take the

PSU out of the case.

5.1 Installing the Rush Power into the PC case

1. Insert the Rush Power into the PC case and put it against the PSU bracket on the

case’s back side.

2. Screw the PSU to the case from the outside using the included screws. Pay

attention not to cover the fan/air intake of the built-in PSU.

RUSH POWER M

5.2 Connecting the PC components to the PSU

5.2.1 The connectors at a glance

Connector SHA-R400M SHA-R500M, SHA-R600M

20+4-pin ATX power connector

1x attached 1x attached

4+4-pin P8 power connector

1x attached 1x attached

6-pin PCIe power connector

1x modular 2x modular

6+2-pin PCIe power connector

1x modular 2x modular

SATA power connector

6x modular 6x modular

4-pin connector for peripheral devices

5x modular 5x modular

4-pin ﬂoppy connector

1x modular 1x modular

RUSH POWER M

Note:

All connectors are designed fault-preventing to avoid misconnection. If you cannot

attach the female connector to the drive’s or peripheral’s male connector, please check

if both connectors are attached in the correct orientation.

Do not force to plug the female connector into the male connector in wrong orien-

tation, nor modify any of the components, as this will damage the PSU and your hard-

ware. SHARKOON warranty does not cover damage caused by incorrect handling.

5.2.2 Connecting mainboard and graphics card(s)

1. Plug the ATX power connector (ﬁg. 1) to the respective jack on the mainboard.

ﬁg. 1

2. In case your mainboard also provides an additional 4-pin or 4+4-pin power connector

(the so called P4 resp. P8 connector), also plug the respective connector (ﬁg. 2).

ﬁg. 2

Note:

The mainboard’s power connection depends on the vendor and may vary. For

detailed information on how to establish the power connection refer to your

mainboard’s manual.

RUSH POWER M

Table des matières

Autres manuels Sharkoon Accessoires informatiques

Sharkoon

Sharkoon MS140 Manuel utilisateur

Sharkoon

Sharkoon ELITE SHARK CA300T Manuel utilisateur

Sharkoon

Sharkoon SCORPIO 1000 Manuel utilisateur

Sharkoon

Sharkoon 8-BAY RA ID STATION Manuel utilisateur

Sharkoon

Sharkoon VAYA Manuel utilisateur

Sharkoon

Sharkoon Bandit Manuel utilisateur

Sharkoon

Sharkoon VG6 Series Manuel utilisateur

Sharkoon

Sharkoon TG5 RGB Manuel utilisateur

Sharkoon

Sharkoon RGB Slider Manuel utilisateur

Sharkoon

Sharkoon VG7 Manuel utilisateur

Sharkoon

Sharkoon RGB FLOW Manuel utilisateur

Sharkoon

Sharkoon Skiller SGC1 Manuel utilisateur

Manuels Accessoires informatiques populaires d'autres marques

Motorola

Motorola ATRIX Manuel utilisateur

HP USB Media Docking Station Manuel utilisateur

Cherry

Cherry B.UNLIMITED 3.0 Manuel utilisateur

Logitech

Logitech IO2 Manuel utilisateur

ARM

ARM DSTREAM-ST Manuel utilisateur

Bartec

Bartec TC 7 Series Manuel utilisateur

Philips

Philips SPC3540 Manuel utilisateur

Logitech

Logitech mk220 Manuel utilisateur

SilverStone

SilverStone LC02 Manuel utilisateur

Flexispot

Flexispot ML2B Manuel utilisateur

Hamlet

Hamlet UNIVERSAL COVER 101 KBT2 Manuel utilisateur

Adam Equipment

Adam Equipment RS-485 Manuel utilisateur

Vivo

Vivo MOUNT-KB05-4DW Manuel utilisateur

Kvaser

Kvaser Memorator Professional Manuel utilisateur

DRC

DRC D-Imaging Manuel utilisateur

Sven

Sven Base 305 сombo Manuel utilisateur

Hama

Hama 108310 Manuel utilisateur

SpeechWare

SpeechWare FlexyMike FMK03 Manuel utilisateur